# Makefile.in generated by automake 1.9.6 from Makefile.am.
# tests/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#***************************************************************************
#                                  _   _ ____  _
#  Project                     ___| | | |  _ \| |
#                             / __| | | | |_) | |
#                            | (__| |_| |  _ <| |___
#                             \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at http://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# $Id: //WIFI_SOC/MP/SDK_4_2_0_0/RT288x_SDK/source/user/curl/tests/Makefile#1 $
###########################################################################
srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/curl
pkglibdir = $(libdir)/curl
pkgincludedir = $(includedir)/curl
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = /usr/bin/install -c
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i386-pc-none
host_triplet = mipsel-unknown-linux-uclibc
subdir = tests
DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/curl-compilers.m4 \
	$(top_srcdir)/m4/curl-confopts.m4 \
	$(top_srcdir)/m4/curl-functions.m4 \
	$(top_srcdir)/m4/curl-override.m4 \
	$(top_srcdir)/m4/curl-reentrant.m4 \
	$(top_srcdir)/m4/curl-system.m4 $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \
	$(top_builddir)/src/curl_config.h \
	$(top_builddir)/include/curl/curlbuild.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} "$(ROOTDIR)/user/curl/missing" --run aclocal-1.9
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = ${SHELL} "$(ROOTDIR)/user/curl/missing" --run tar
AR := $(AR)
AS := $(AS) 
AUTOCONF = ${SHELL} "$(ROOTDIR)/user/curl/missing" --run autoconf
AUTOHEADER = ${SHELL} "$(ROOTDIR)/user/curl/missing" --run autoheader
AUTOMAKE = ${SHELL} "$(ROOTDIR)/user/curl/missing" --run automake-1.9
AWK = gawk
CC := $(CC) 
CCDEPMODE = depmode=gcc3
CFLAGS := $(CFLAGS) -O2 -fomit-frame-pointer -pipe -Dlinux -D__linux__ -Dunix -DEMBED -isystem $(ROOTDIR)/lib/include -isystem $(ROOTDIR)/uClibc++/include -isystem $(ROOTDIR) -isystem $(ROOTDIR)/linux-2.6.21.x/drivers/char -g0 -Wno-system-headers
CPP := $(CPP)
CPPFLAGS := $(CPPFLAGS)
CROSSCOMPILING_FALSE = #
CROSSCOMPILING_TRUE = 
CURLDEBUG_FALSE = 
CURLDEBUG_TRUE = #
CURL_CA_BUNDLE = "/etc/pki/tls/certs/ca-bundle.crt"
CURL_DISABLE_DICT = 
CURL_DISABLE_FILE = 
CURL_DISABLE_FTP = 
CURL_DISABLE_HTTP = 
CURL_DISABLE_LDAP = 1
CURL_DISABLE_LDAPS = 1
CURL_DISABLE_PROXY = 
CURL_DISABLE_TELNET = 
CURL_DISABLE_TFTP = 
CURL_LIBS = 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
FGREP = /bin/grep -F
GREP = /bin/grep
HAVE_ARES = 
HAVE_LIBZ = 
HAVE_LIBZ_FALSE = 
HAVE_LIBZ_TRUE = #
HAVE_PK11_CREATEGENERICOBJECT = 
IDN_ENABLED = 
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
IPV6_ENABLED = 
KRB4_ENABLED = 
LD := $(LD)
LDFLAGS = -Wl,--fatal-warnings -L$(ROOTDIR)/lib/lib -L$(ROOTDIR)/uClibc++/src -Wl,--fatal-warnings -L$(ROOTDIR)/lib/lib -L$(ROOTDIR)/uClibc++/src
LIBCURL_LIBS = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAINTAINER_MODE_FALSE = 
MAINTAINER_MODE_TRUE = #
MAKEINFO = ${SHELL} "$(ROOTDIR)/user/curl/missing" --run makeinfo
MANOPT = -man
MIMPURE_FALSE = 
MIMPURE_TRUE = #
NM := $(NM)
NMEDIT = 
NO_UNDEFINED_FALSE = 
NO_UNDEFINED_TRUE = #
NROFF = /usr/bin/gnroff
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = curl
PACKAGE_BUGREPORT = a suitable curl mailing list => http://curl.haxx.se/mail/
PACKAGE_NAME = curl
PACKAGE_STRING = curl -
PACKAGE_TARNAME = curl
PACKAGE_URL = 
PACKAGE_VERSION = -
PATH = /usr/kerberos/sbin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/root/bin:$(ROOTDIR)/tools
PATH_SEPARATOR = :
PERL = /usr/bin/perl
PKGADD_NAME = cURL - a client that groks URLs
PKGADD_PKG = HAXXcurl
PKGADD_VENDOR = curl.haxx.se
PKGCONFIG = 
RANDOM_FILE = 
RANLIB := $(RANLIB)
REQUIRE_LIB_DEPS = yes
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
SONAME_BUMP_FALSE = 
SONAME_BUMP_TRUE = #
SSL_ENABLED = 
STATICLIB_FALSE = 
STATICLIB_TRUE = #
STRIP := $(STRIP)
SUPPORT_FEATURES = 
SUPPORT_PROTOCOLS =  HTTP FTP FILE TELNET DICT TFTP
TEST_SERVER_LIBS = 
USE_EMBEDDED_ARES_FALSE = 
USE_EMBEDDED_ARES_TRUE = #
USE_GNUTLS = 
USE_LIBSSH2 = 
USE_MANUAL_FALSE = #
USE_MANUAL_TRUE = 
USE_NSS = 
USE_SSLEAY = 
USE_WINDOWS_SSPI = 
VERSION = 7.19.7
VERSIONNUM = 071307
ac_ct_CC = 
ac_ct_DUMPBIN = 
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i386-pc-none
build_alias = i386
build_cpu = i386
build_os = none
build_vendor = pc
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = mipsel-unknown-linux-uclibc
host_alias = mipsel-linux-uclibc
host_cpu = mipsel
host_os = linux-uclibc
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(ROOTDIR)/user/curl/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
libext = a
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_ECHO = echo
mandir = ${datarootdir}/man
mkdir_p = mkdir -p --
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
subdirs = 
sysconfdir = ${prefix}/etc
target_alias = 
HTMLPAGES = testcurl.html runtests.html
PDFPAGES = testcurl.pdf runtests.pdf
EXTRA_DIST = ftpserver.pl httpserver.pl httpsserver.pl runtests.pl getpart.pm \
 FILEFORMAT README stunnel.pem memanalyze.pl testcurl.pl valgrind.pm ftp.pm   \
 sshserver.pl sshhelp.pm testcurl.1 runtests.1 $(HTMLPAGES) $(PDFPAGES) \
 CMakeLists.txt certs/scripts/*.sh certs/Server* certs/EdelCurlRoot*

SUBDIRS = data server libtest
PERLFLAGS = -I$(srcdir)
CLEANFILES = .http.pid .https.pid .ftp.pid .ftps.pid
MAN2HTML = roffit < $< >$@
#TEST = srcdir=$(srcdir) $(PERL) $(PERLFLAGS) $(srcdir)/runtests.pl
TEST = @echo "NOTICE: we can't run the tests when cross-compiling!"
#TEST_Q = -a -s
TEST_Q = 
#TEST_F = -a -p
TEST_F = 
#TEST_T = -a -t
TEST_T = 
all: all-recursive

.SUFFIXES:
.SUFFIXES: .1 .html .pdf
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  tests/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  tests/Makefile
mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(mkdir_p) $(distdir)/certs $(distdir)/certs/scripts
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-libtool clean-recursive ctags \
	ctags-recursive distclean distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-exec install-exec-am install-info \
	install-info-am install-man install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic maintainer-clean-recursive \
	mostlyclean mostlyclean-generic mostlyclean-libtool \
	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-info-am


curl:
	@cd $(top_builddir) && $(MAKE)

test: all
	$(TEST)

quiet-test: all
	$(TEST) $(TEST_Q)

full-test: all
	$(TEST) $(TEST_F)

torture-test: all
	$(TEST) $(TEST_T)

.1.html:
	$(MAN2HTML)

.1.pdf:
	@(foo=`echo $@ | sed -e 's/\.[0-9]$$//g'`; \
	groff -Tps -man $< >$$foo.ps; \
	ps2pdf $$foo.ps $@; \
	rm $$foo.ps; \
	echo "converted $< to $@")
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
