bh_internet_checking = "Checking the Internet connection; please wait …";
bh_config_net_connection = "Configuring the Internet Connection";
bh_connection_further_action = "You are not yet connected to the Internet.";
bh_want_genie_help = "Do you want NETGEAR Genie to help?";
bh_yes_mark = "Yes";
bh_no_genie_help = "No, I want to configure the Internet connection myself.";
bh_no_genie_help_confirm = "Configuring the Internet connection requires networking experience. Are you sure?"
bh_have_saved_copy = "I have saved the router settings in a file and I want to restore the router to those settings."
bh_next_mark = "Next";
bh_detecting_connection = "Detecting the Internet Connection";
bh_plz_wait_process = "This process can take a minute or two; please wait...";
bh_no_cable = "No Ethernet Cable Is Plugged into the Router Internet Port";
bh_wizard_setup_nowan_check = "Make sure that the cable is securely plugged into both the broadband modem port and the router Internet port.";
bh_click_try_again = "After you have checked the Ethernet cable, click <b>Try again</b>.";
bh_try_again = "Try again";
bh_pppoe_connection = "PPPoE DSL Internet Connection Detected";
bh_enter_info_below = "Enter the required information below.";
bh_pppoe_login_name = "User Name";
bh_ddns_passwd = "Password";
bh_ISP_namePasswd_error = "Incorrect ISP User name or Password";
bh_enter_info_again = "Enter the required information again.";
bh_pptp_connection = "PPTP Internet Connection Detected";
bh_basic_pptp_servip = "Server Address";
bh_sta_routes_gtwip = "Gateway IP Address";
bh_basic_pptp_connection_id = "Connection ID/Name";
bh_bpa_connection = "BigPond Internet Connection Detected"; 
bh_basic_bpa_auth_serv = "Authentication Server"
bh_basic_pppoe_idle = "Idle Time-Out(in minutes)"
bh_L2TP_connection = "L2TP Internet Connection Detected"; 
bh_L2TP_MyIP = "My IP Address";
bh_L2TP_subnetmask = "Subnet Mask";
bh_no_internet_ip = "Problem Detecting the Internet Connection";
bh_no_internet_ip2 = "Problem Detecting the Internet Connection - IP Address";
bh_no_internet_ip3 = "Problem Detecting the Internet Connection - MAC Address";
bh_if_have_static_ip = "Did your Internet Service Provider (ISP) assign to you a fixed (static) IP address? This is a <b>very rare</b> special deployment. ";
bh_yes_correct = "Yes. My ISP assigned a fixed (static) IP address to me.";
bh_not_have_static_ip = "No. I did not get a fixed (static) IP address from my ISP.";
bh_do_not_know = "I don't know. ";
bh_select_option = "Select an option and click <b>Next</b> to proceed.";
bh_select_an_option = "Select an option first.";
bh_fix_ip_setting = "Fixed Internet IP Settings";
bh_enter_ip_setting = "Enter the fixed IP settings assigned by your Internet Service Provider and click <b>Next</b> to proceed.";
bh_info_mark_ip = "IP Address";
bh_info_mark_mask = "Subnet Mask";
bh_constatus_defgtw="Default Gateway";
bh_preferred_dns = "Preferred DNS Server";
bh_alternate_dns = "Alternate DNS Server";
bh_genie_cannot_find_ip = "This is most likely due to one of the following reasons:";
bh_genie_cannot_find_ip_reason1 = "1.  The modem was not power cycled during the cabling step.";
bh_genie_cannot_find_ip_reason1_desc = "To solve this problem, power cycle the modem (turn it off and on). To power cycle a modem with battery backup, you might need to remove and reinsert its battery. After the power cycle, wait 2 minutes for the modem to completely start up."; 
bh_genie_cannot_find_ip_reason2 = "2.  The yellow Ethernet cable is not fully inserted, or is inserted in the wrong place.";
bh_genie_cannot_find_ip_reason2_desc = "To solve this problem, make sure that the yellow Ethernet cable is securely plugged in to the broadband modem port and the router Internet port.";
bh_select_no_IP_option = "Select one of the options below and click <b>Next</b> to proceed:";
bh_select_no_IP_option1 = "I just power cycled the modem and waited for 2 minutes.";
bh_select_no_IP_option2 = "I corrected a problem with the Ethernet cable.";
bh_select_no_IP_option3 = "None of the above.";
bh_use_pc_mac = "If you previously connected to your Internet service with a computer or another router,  NETGEAR Genie can use the same MAC address that worked before.";
bh_mac_in_product_label = "A MAC address is a unique number.  You can find the MAC address of the computer or router on its product label.";
bh_enter_mac = "Enter the MAC address here.";
bh_mac_format = "(format AABBCCDDEEFF)";
bh_settings_restoration = "Restore Router Settings";
bh_browser_file = "Browse to the router settings backup file you previously saved, and click <b>Next</b> to proceed.";
bh_back_mark = "Back";
bh_settings_restoring = "Restoring Router Settings"; 
bh_plz_waite_restore = "This process can take a few minutes; please wait …";
bh_apply_connection = "Applying Internet Connection Settings";
bh_plz_waite_apply_connection = " This process can take a minute or two; please wait...";
bh_netword_issue = "Network Connection Issue";
bh_cannot_connect_internet = "The router cannot connect to the Internet with the current settings.";
bh_plz_reveiw_items = "Please review the following items:";
bh_cable_connection = "- Check that the cable connections are correct. Refer to the router Installation Guide for instructions.";
bh_modem_power_properly = "- Check that your broadband modem is power cycled correctly. If you have a battery-backed modem, remove and reinsert the battery to power cycle your modem.";
bh_try_again_or_manual_config = "Do you want NETGEAR Genie to try again?";
bh_I_want_manual_config = "No. I want to configure the Internet connection myself."; 
bh_manual_config_connection = "I want to configure the Internet connection myself";
bh_congratulations = "Congratulations!";
bh_connect_success_1 = "You are successfully connected to the Internet.";
bh_connect_success_2 = "This router is preset with the following unique wireless network name (SSID) and ";
bh_network_key = "network key (password)";
bh_rollover_help_text = "Your router is preset with WPA2-PSK wireless security to protect your network from unwanted access. To join the wireless network, you must enter the network key (password). These preset settings are unique to this device, like a serial number.  If you want to change them, you can do so later in the Wireless Settings screen on the router web GUI."; 
bh_wireless_name = "Wireless Network Name (SSID)";
bh_wireless = "Wireless ";
bh_wpa_wpa2_passpharse = "Network Key (Password)";
bh_print_this = "Print this";
bh_take_to_internet = "Take me to the Internet";
bh_plz_wait_moment = "Please wait a moment...";
bh_not_support_print = "Computer does not support a printer.";
bh_login_name_null = "User name cannot be blank.";
bh_password_error = "Invalid password.";
bh_idle_time_null = "Please enter idle time.\n";
bh_invalid_idle_time = "Invalid idle time. Please enter a correct number.\n";
bh_invalid_myip = "Invalid IP address. Please enter it again, or leave it blank.";
bh_invalid_gateway = "Invalid gateway IP address. Please enter it again.";
bh_bpa_invalid_serv_name = "Invalid authentication server IP address.";
bh_invalid_servip_length = "The labels should be 63 characters or less.\n";
bh_invalid_ip = "Invalid IP address. Please enter it again.";
bh_invalid_mask = "Invalid subnet mask. Please enter it again.\n";
bh_same_subnet_ip_gtw = "The IP address and gateway IP address must be in the same subnet.\n";
bh_same_lan_wan_subnet = "The LAN IP address and WAN IP address must not be in the same subnet.";
bh_filename_null = "File name cannot be blank.";
bh_not_correct_file = "Please assign the correct file. The file format is *.";
bh_ask_for_restore = "Warning! \nRestoring settings from a configuration file will erase all of the current settings. \nAre you sure you want to do this?";
bh_invalid_primary_dns = "Invalid primary DNS address. Please enter it again.\n";
bh_invalid_second_dns = "Invalid secondary DNS address. Please enter it again.\n";
bh_dns_must_specified = "DNS address must be specified.";
bh_invalid_mac = "Invalid MAC address.";
bh_failure_head = "Failure";
bh_few_second = "This screen will automatically return to the previous screen in a few seconds...";
bh_important = "Important Update";
bh_wanlan_conflict_info = "To avoid a conflict with your Internet Service Provider, your router's IP address has been updated to ";
bh_continue_mark = "Continue";
bh_connect_no_sec1 = "Wireless security is not enabled on this router. NETGEAR highly recommends that you ";
bh_connect_no_sec2 = "Click here";
bh_connect_no_sec3 = " to enable wireless security and protect your network.";
bh_firmware_version = "Router Firmware Version";
bh_multi_login_info = "You are currently logged in from another device. There can be only one device logged in at a time. If you log in from this device, the other device will be logged out. Do you want to proceed?";
bh_no_mark = "No";
DFS_radar_mark="This DFS channel is not allowed to use because the Radar was detected before. You can change another channel or wait ";
RU_fixip_warn="Attention! Your ISP have Static IP settings for you intranet interface. That means you might need to add static routes to ISP local resources working correctly. Please proceed to the Static routes page in router's GUI after CA finishes the setup process."
wait_for_searching = "Smart setup is searching for existing WiFi networks. This may take up to a minute."
ca_wireless_ap = "Select the name of your existing network."
sel_24g="Select your 2.4GHz WiFi network to connect the Extender to your router:"
refresh_mark = "Refresh"
continue_mark = " Continue"
guest_table_ssid = "SSID"
info_mark_chan = "Channel"
ca_ap_signal = "Signal"
guest_table_secur = "Security"
ca_manual_wl_ssid = "Manually input my wireless SSID"
sel_5g="Select your 5GHz WiFi network to connect the Extender to your router:"
ca_ap_head = "Enter the security password for your selected WiFi network"
network_24g = "Your existing network in 2.4GHz:"
info_mark_ssid = "Name (SSID)"
email_none = "None"
r_wep = "WEP"
wpapsk = "WPA-PSK [TKIP]"
r_wpa2 = "WPA2-PSK [AES]"
sec_enc_head = "Security Encryption (WEP)"
ca_12_encr = "Encryption Strength"
sec_key = "Security Encryption (WEP) Key"
sec_phr = "Password (network key):"
generate_mark = "Generate"
sec_key1 = "Key 1:"
sec_key2 = "Key 2:"
sec_key3 = "Key 3:"
sec_key4 = "Key 4:"
sec_863_or_64h = "(8-63 characters or 64 hexdigits)"
wpa_decribion1 = "If you have Access Control List (ACL) enabled in your router, please make sure you have added below MAC address into your router's Access Control List (ACL). "
wpa_decribion2 = "Your wireless adapter MAC address is "
wpa_decribion3 = " "
ca_mac="The Extender MAC address is "
network_5g = "Your existing network in 5GHz:"
back_mark = " <Back "
ca_retry_head = "The Extender was not able to connect to your existing network."
ca_retry_message = "Please re-enter the passphrase and try again.<br><br>If you entered the correct passphrase, and the Extender did not connect to your existing wireless<br>network, you might need to move the Extender closer to your router or to a position with a better line of<br>sight. Check the Extender LEDs to isolate the problem. The LEDs are explained in the installation guide and<br>user manual for your product.<br><br>Click Cancel to select a different network.<br>  "
keep_ssid_warning = "To ensure the delivery of optimal wireless performance to your devices, NETGEAR recommends that you keep a unique SSID for the Extender network and you only connect to the Extender network when the existing network does not deliver good enough coverage."
ca_apsetting_head = "Enter name and security settings for your extended WiFi network."
info_mark_2g_ssid = "2.4GHz Network Name (SSID):"
info_mark_5g_ssid = "5GHz Network Name (SSID):"
eth_bind_band = "Ethernet ports use the following WiFi band:"
ca_ap_use_same_sec = "Use the existing securiy mode and password settings."
r_wpas = "WPA-PSK [TKIP] + WPA2-PSK [AES]"
route_title = "router form"
wait_for_connect = "Setting up connection between the extender and your existing router.<br>Please wait…"
wait_for_connect2="Applying your settings. This may take up to a minute."
ca_15_logging_1 = "Follow the instructions below to connect you devices to the extended network."
ca_15_logging_2 = "Your extender network has been created:"
ca_15_repeater_24g = "2.4GHz Extender Network:"
ca_15_repeater_5g = "5GHz Extender Network:"
ca_15_ssid = "Name (SSID)"
ca_15_sec = "Security"
cp_passwd = "copy password "
ca_15_logging_3="Connect your devices like a laptop, tablet, smart TV, etc. to your extended network. For example, on your laptop you may use the Windows WiFi manager to connect to the newly extended network."
ca_checkbox="Click the Continue button after you connect your WiFi device."
next_mark = " Continue"
ca_con_success_head = "Your extender has successfully connected to your existing WiFi network."
finish = " Finish "
ca_connect_uncomplete_head = "Move Extender closer to your existing router or gateway."
ca_connect_uncomplete_1 = "The Link Rate LED is red. That means the Extender does not have a good connection to your existing wireless network.  "
ca_connect_uncomplete_2 = "<b> NETGEAR recommends that you move the Extender closer to your router or to a location with a better line of sight, then click Try again.</b><br><br> "
ca_connect_uncomplete_3 = "If you want to select a different network, click Cancel.<br><br> "
ca_connect_uncomplete_4 = "To complete the setup as is, click Finish.<br> "
ca_connect_uncomplete_5 = " "
tryagain_mark = " Try again "
ca_connect_uncomplete_wpa = "The selected network is no longer available.  Please make sure the existing network equipment is within the proximity of the Extender."
24g_flag="2.4GHz"
5g_flag="5GHz"
select_network="1-Select Network"
apply_sec="2-Apply Security"
connect_network="3-Configure Extender"
config_repeater="4-Finalize Settings"
review_setting="5-Review Settings"
ca_change_24g="The Extender 2.4GHz network name (SSID) has been changed to "
ca_change_5g="The Extender 5GHz network name (SSID) has been changed to "
ca_change_5g_2=", and 5GHz network name (SSID) has been changed to "
ca_follow=". \n\nFollow the instruction to complete the setup."
ca_con_success="The link rate LED is green, indicating that the Extender is connecting to the existing network at best speed."
ca_con_amber="The link rate LED is amber, indicating that the Extender is connected to the existing network at good speed."
ca_retry_message1="Please re-enter the passphrase and try again."
ca_retry_message2="If you entered the correct passphrase, and the Extender did not connect to your existing wireless network, you might need to move the Extender closer to your router or to a position with a better line of sight. Check the Extender LEDs to isolate the problem. The LEDs are explained in the installation guide and user manual for your product."
ca_retry_message3="Click Cancel to select a different network."
sec_type="Security Options"
select_country="Please select your Country or Region"
select_band_head="Select the WiFi band you would like to connect your devices to:"
performance_head="FastLane technology offers maximum performance by using both 2.4 and 5GHz bands to create one fast connection. To configure FastLane technology, you will need a dual band router."

select="Select"
security_null="Please select the security mode of the WiFi network."
coun_select1="--- Select Region ---"
coun_af="Africa"
coun_as="Asia"
coun_au="Australia"
coun_ca="Canada"
coun_eu="Europe"
coun_fr="France"
coun_is="Israel"
coun_jp="Japan"
coun_mx="Mexico"
coun_sa="South America"
coun_us="United States"
coun_ko="Korea"
coun_middle_east="Middle East"
coun_ru="Russia"
coun_ch="China" 
coun_in="India"
coun_ma="Malaysia"
coun_middle_east_asy="Middle East(Algeria/Syria/Yemen)"
coun_middle_east_ilq="Middle East(Iran/Labanon/Qatar)"
coun_middle_east_tetk="Middle East(Turkey/Egypt/Tunisia/Kuwait)"
coun_middle_east_sa="Middle East(Saudi Arabia)"
coun_middle_east_uae="Middle East(United Arab Emirates)"
coun_si="Singapore"
coun_tw="Taiwan"
coun_na="North America"
back_mark_2="Back"
coun_select="Please select the correct region for your location."
ssid_same="2.4G and 5G have the same SSID"
ssid_null="SSID can't be blank!"
a_notssid="Character is not allowed in SSID."
alert_wpapsk="IMPORTANT\nWPA-PSK [TKIP] ONLY operates at \"Up to 54Mbps\" (legacy G) mode, not N mode.\nNETGEAR recommends that you use WPA2-PSK [AES] to get full N rate support."
alert_autopsk="IMPORTANT\nWPA-PSK [TKIP] may only operate at \"Up to 54Mbps\" (legacy G) rate, not N rate.\nNETGEAR recommends that you use WPA2-PSK [AES] to get full N rate support."
skip_mark="Skip"
cancel_mark="Cancel"
passphrase_notice="A passphrase consists of either 8~63 ASCII characters or exactly 64 hex-digits. A hex digit is one of these characters: 0, 1, 2, ..., 8, 9, A, B, C, D, E, F."
a_notallowpassp="Character is not allowed in passphrase."
m_key64="Invalid Key.\n\nKeys length should be 10 Hex (0~9 and A~F) chars or 5 ASCII chars."
m_key128="Invalid Key.\n\nKeys length should be 26 Hex (0~9 and A~F) chars or 13 ASCII chars."
ca_add_bookmark="Do you want to add \"Extender Configuration\" as a bookmark?"

ca_configure="Configuring the Extender"
ca_notice1="You are not able to connect to the Internet."
ca_notice2="Do you want NETGEAR Genie to help?"
wizard_setup_yes="Yes."
ca_select_no="No, I'll connect manually"
wps_next_mark="Next"

//20120215 Netgear update GUI
menu1="Step 1 : Select the WiFi Network"
menu2="Step 2 : Set Up the Extender"
menu3="Step 3 : Apply Settings"
ca_notice1_1="Your WiFi extender is not connected to the router. Do you want NETGEAR Genie to help?"
ca_ap_manual_head="Enter your existing router's WiFi network settings"
ca_wireless_ap_24g="Select the 2.4GHz WiFi network you would like to extend."
ca_wireless_ap_5g="Select the 5GHz WiFi network you would like to extend."
sel_5g_des_1="Your extender supports dual band WiFi."
sel_5g_des_2="If your router does not support 5GHz band, click the Skip button. "
not_support_5g="My router does not support 5GHz band."
confirm_24g="You need to have a 5GHz network setup to be able to skip 2.4GHz setup, otherwise the extender won't be able to connect to your existing network.\nAre you sure you want to continue?"

//user select network type
private_network="Private Network"
public_network="Public Network (selecting this will enable NAT/firewall)"
ca_wifi_head="Is this WiFi network ("
ca_wifi_head_rest=") a private home network or a public network (such as in a hotel or coffee shop)?"
ca_wire_head="Is the wire connecting to a private home network or a public network (such as in a hotel or coffee shop)?"

genie_menu1="Step 1 : Detect the Internet Connection"
genie_menu2="Step 2 : Set Up the Extender"
genie_menu3="Step 3 : Apply Settings"

sel_2g_des_1="Your extender supports dual band WiFi."
sel_2g_des_2="If you want to connect to 5GHz only, click the Skip button."

link_rate_localization1="Within 2 minuters after the extender connects to the router or gateway and a client, check the Arrow LEDs on the extender to see if they are<br>blinking. A blinking arrow means that you should move the extender to a different location for better WiFi performance.<br>If the extender is in a good location for WiFi performance, the Arrow LEDs do not blink."
link_rate_localization2="Left Arrow LEDs is blinking:"
link_rate_localization3="Move the extender closer to the router or gateway. If that is not possible, try to improve the line of sight between the router and the extender."
link_rate_localization4="Right Arrow LEDs is blinking:"
link_rate_localization5="Move the extender closer to the location of the client(the wireless computer or device that is using the extender WiFi network)."
router_link_rate_behavior="<b>The Router Link LED behaves as below:</b><br>Green: Cable connected and has obtained IP<br>Red: Cable connected but fail to obtain IP<br>Off: No cable connected"
client_link_rate_behavior="<b>The Client Link LED behaves as below:</b><br>Green: Good quality<br>Amber: Fair quality<br>Red: Poor quality"

internet_via_WiFi="The switch on your extender has been set to WiFi Range Extender."
internet_via_Wired="The switch on your extender has been set to Access Point."
switch_to_AP="Do you want to enable AP mode?"
switch_to_Extender="Do you want to enable extender mode?"

ca_15_repeater="Extender network"
ca1_15_checkbox="My computer is connected to the Extender network. (Selecting this checkbox activates the Continue button.)"
extender_info="Please use your wireless profile manager software (Windows, NETGEAR Adapter Wizard, etc) re-connect to the Extender network using the information displayed below. "
disable_dhcp="Internal DHCP Server will be disabled. Do you want to continue?"

/////////////////////////////////////////////New GUI Strings////////////////////////////////////////////////////////

save_upper="SAVE"
cancel_upper="CANCEL"
back_upper="BACK"
next_upper="NEXT"
ok_lower="ok"

//screen1.html
choose_mode="Choose your operating mode"
welcome_genie="Welcome to NETGEAR genie! How would you like to use your extender?"
ap_mark="Access Point"

//howToUse.html
extend_exist_network="Selecting WiFi Range Extender allows you to extend the range of your existing WiFi network."
wifi_hotspot="Selecting Access Point allows you to create a WiFi hotspot in a location where you have an existing wired connection."

//screen2.html
genie_setup="Welcome to the NETGEAR genie setup"
setup_option="Now let’s get you connected. Choose one of the setup options below."
connect_extender_browser="Connect your extender using a browser based installation guide. Smart Setup allows you to  select a unique network name and password for your extender."
smart_setup="Smart Setup"
connect_extender_wps="Connect to your extender by pressing the WPS SETUP below or the physical button on the extender. To use this feature your existing router has to support WPS."
wps_setup_new="WiFi Protected Setup (WPS)"

//screen3-access.html
look_internet_conn="Looking for an Internet connection."
connect_detect="Connection Detected"
no_connect_detect="No Connection Detected"

//screen4-access.html
decect_conn="Problem detecting connection"
not_find_conn="We could not find an Internet connection."
try_str="Try one of the following and then try again."
restart_router_info="Restart the router by turning it off and  back on again. After restarting wait 2 minutes for the router to start up."
check_info="Make sure that the you are using the right Ethernet port and that the cable is securely plugged into the port on the extender and the router."
operation_tip="Select one of the options below and click Try Again to proceed:"
operation_process="I just restarted the modem and waited for 2 minutes."
problem_info="I corrected a problem with the Ethernet cable."
none_info="None of the above."
try_again_sign="Try Again"

//screen5-access.html
conn_type="Where is the connection"
inquery_network_conn="Is your wired Ethernet connection connected to a private or public network?"
setting_network="Use this setting if your are connected to a wired home network connection."
home_network_mark="Home Network"
firewall_enable="Enables NAT firewall for an additional layer of protection. Use this setting if you are connecting to a wired network in a hotel or a coffee shop."
network_public="Public Network"

//networkTypeNote.html
network_type_note="Malicious botnets are constantly scanning the Internet for devices that can be exploited for spamming or identity theft. Many applications unintentionally leave connections open. If malicious software connects to these applications, they can exploit bugs to gain control of your system and install malware. NAT Firewall blocks these malicious scans and connections."

//screen6-access.html
info_ap="Enter a network name and security settings for your access point network(s)."
band_24g="2.4GHz Network"
band_5g="5GHz Network"

//securitySettingsNote.html
security_setting_note="You can name your extended network the same name as your existing network on this page. However, we recommend that you use a different network name since this allows you to know when you are using your extended network."

//screen7-access.html
apply_settings="We are applying your settings. <br/>This may take a moment."
mark_setting="Settings Applied"

//screen8-access-dual-connected.html
success_create_ap="You have successfully created an access point."
24g_ap_network="2.4GHz Access Point Network"
5g_ap_network="5GHz Access Point Network"

//screen8-access-dual-notConnected.html
info_fail_conn="You have created an access point but we did not detect an Internet connection."
run_setup="Try running setup again."

//screen10-access-connected.html
ap_up_tip="Your access point is up and running."
ap_24g_setting="Access Point Wireless Settings (2.4GHz)"
ap_5g_setting="Access Point Wireless Settings (5GHz)"

//screen10-access-notConnected.html
conn_ap_info="Select smart setup button below to connect your access point."

//screen3-extender.html
select_network_title="Select your network"
select_network_extend="Select an existing network you would like to extend."
deselect_wifi="If you don't want to extend both WiFi bands, deselect the WiFi band by unchecking the box below."
learn_more_mark="Learn More »"
24g_wifi="2.4GHz WiFi Networks"
wpa_wpa2_sec="WPA/WPA2-PSK"
wpa2_psk="WPA2-PSK"
manual_input_ssid="Manually Input Network Name (SSID)"
pwd_char="Enter Password (8-63 characters):"
verify_pwd="Verify Password:"
scan_str="Scanning"
5g_wifi="5GHz WiFi Networks"

//selectNetworkNote.html
recommend_info="We recommend that the existing network you are extending should have at least 60% signal strength for an ideal extended network performance."

//screen4-extender.html
24g_network="2.4GHz Existing Network"

//screen4b-extender.html
enter_pwd="Enter password"
pwd_enter_tip="Enter the password (network key) for your existing WiFi network you selected."
5g_network="5GHz Existing Network"
network_selected="Selected Network:"
protocol_sec="Security Protocol:"
show_pwd="Show password"

//screen5-extender.html
security_setting="Enter security settings"
wifi_enter_tip="Enter a network name and security settings for your extended WiFi network(s)."
24g_extend="2.4GHz Extended Network"
same_exist_pwd="Same as existing network password"
use_differ_pwd="Use a different password"
5g_extend="5GHz Extended Network"

//screen6-extender-dual.html
extender_success_conn="Your extender has successfully connected to your existing WiFi network"
main_network_conn="Connect any WiFi enabled device like you would connect them to your main network, using the credentials below."

//screen7-extender.html
title_register="Register"
info_register_extender="Register your extender to receive notifications about software updates<br />and new product promotions."
skip_reg_mark="Skip Registration »"
first_name_mark="First Name"
last_name_mark="Last Name"
email_lable="Email"
country_lable="Country"
date_purchase="Purchase Date"
serial_num="Serial Number"
info_product="My product is refurbished or does not have a serial number"
genie_mark="Bookmark NETGEAR genie"
info_comm="Send me email communications from NETGEAR"
install_info="Install WiFi Analytics app (Android only)"
country_af="Afghanistan"
country_aland="Åland Islands"
country_alb="Albania"
country_alg="Algeria"
country_am="American Samoa"
country_and="Andorra"
country_ang="Angola"
country_an="Anguilla"
country_ant="Antarctica"
country_anba="Antigua and Barbuda"
country_arg="Argentina"
country_arm="Armenia"
country_aru="Aruba"
country_aus="Austria"
country_az="Azerbaijan"
country_bah="Bahamas"
country_bahr="Bahrain"
country_ban="Bangladesh"
country_bar="Barbados"
country_bela="Belarus"
country_belg="Belgium"
country_beli="Belize"
country_ben="Benin"
country_ber="Bermuda"
country_bhu="Bhutan"
country_bol="Bolivia, Plurinational State of"
country_boss="Bonaire, Sint Eustatius and Saba"
country_boh="Bosnia and Herzegovina"
country_bot="Botswana"
country_bou="Bouvet Island"
country_bra="Brazil"
country_bri="British Indian Ocean Territory"
country_bru="Brunei Darussalam"
country_bul="Bulgaria"
country_burf="Burkina Faso"
country_buru="Burundi"
country_cam="Cambodia"
country_camer="Cameroon"
country_cav="Cape Verde"
country_cay="Cayman Islands"
country_cenaf="Central African Republic"
country_cha="Chad"
country_chi="Chile"
country_chr="Christmas Island"
country_coc="Cocos (Keeling) Islands"
country_col="Colombia"
country_com="Comoros"
country_con="Congo"
country_cor="Congo, the Democratic Republic of the"
country_cki="Cook Islands"
country_cos="Costa Rica"
country_ci="Côte d'Ivoire"
country_cro="Croatia"
country_cub="Cuba"
country_cur="Curaçao"
country_cyp="Cyprus"
country_cze="Czech Republic"
country_den="Denmark"
country_dj="Djibouti"
country_dom="Dominica"
country_dop="Dominican Republic"
country_ecu="Ecuador"
country_egy="Egypt"
country_eis="El Salvador"
country_eqc="Equatorial Guinea"
country_eri="Eritrea"
country_est="Estonia"
country_eth="Ethiopia"
country_fim="Falkland Islands (Malvinas)"
country_fai="Faroe Islands"
count_fi="Fiji"
count_fin="Finland"
country_fg="French Guiana"
country_fp="French Polynesia"
country_fst="French Southern Territories"
country_ga="Gabon"
country_gam="Gambia"
country_geo="Georgia"
country_ger="Germany"
country_gha="Ghana"
country_gib="Gibraltar"
country_gre="Greece"
country_grd="Greenland"
country_gra="Grenada"
country_guad="Guadeloupe"
coun_gm="Guam"
country_gua="Guatemala"
country_guer="Guernsey"
country_gui="Guinea"
country_gub="Guinea-Bissau"
coun_gua="Guyana"
coun_hai="Haiti"
country_himi="Heard Island and McDonald Islands"
country_hs="Holy See (Vatican City State)"
country_ho="Honduras"
coun_hk="Hong Kong"
coun_hu="Hungary"
coun_ice="Iceland"
coun_ind="Indonesia"
coun_iir="Iran, Islamic Republic of"
coun_ira="Iraq"
coun_ire="Ireland"
coun_iom="Isle of Man"
coun_ita="Italy"
coun_jam="Jamaica"
coun_jer="Jersey"
coun_jo="Jordan"
coun_kaz="Kazakhstan"
coun_ken="Kenya"
coun_kir="Kiribati"
coun_kdp="Korea, Democratic People's Republic of"
coun_kp="Korea, Republic of"
coun_ku="Kuwait"
coun_ky="Kyrgyzstan"
coun_lap="Lao People's Democratic Republic"
coun_la="Latvia"
coun_leb="Lebanon"
coun_les="Lesotho"
coun_lib="Liberia"
coun_lia="Libya"
coun_lin="Liechtenstein"
coun_lth="Lithuania"
coun_lu="Luxembourg"
coun_mac="Macao"
coun_may="Macedonia, the former Yugoslav Republic of"
coun_mad="Madagascar"
coun_mal="Malawi"
coun_mald="Maldives"
coun_mali="Mali"
coun_malt="Malta"
coun_mari="Marshall Islands"
coun_mar="Martinique"
coun_mau="Mauritania"
coun_maur="Mauritius"
coun_mye="Mayotte"
coun_mfs="Micronesia, Federated States of"
coun_mor="Moldova, Republic of"
coun_mon="Monaco"
coun_mona="Mongolia"
coun_mot="Montenegro"
coun_moe="Montserrat"
coun_moc="Morocco"
coun_moz="Mozambique"
coun_myr="Myanmar"
coun_nam="Namibia"
coun_nau="Nauru"
coun_nep="Nepal"
coun_net="Netherlands"
coun_nec="New Caledonia"
coun_nez="New Zealand"
coun_nic="Nicaragua"
coun_nig="Niger"
coun_nigr="Nigeria"
coun_niu="Niue"
coun_noi="Norfolk Island"
coun_nom="Northern Mariana Islands"
coun_now="Norway"
coun_om="Oman"
coun_pak="Pakistan"
coun_pal="Palau"
coun_pto="Palestinian Territory, Occupied"
coun_pan="Panama"
coun_neca="New Caledonia"
coun_para="Paraguay"
coun_per="Peru"
coun_phi="Philippines"
coun_pit="Pitcairn"
coun_pol="Poland"
coun_por="Portugal"
coun_pur="Puerto Rico"
coun_qat="Qatar"
coun_rui="Réunion"
coun_rom="Romania"
coun_rf="Russian Federation"
coun_rwa="Rwanda"
coun_sb="Saint Barthélemy"
coun_sht="Saint Helena, Ascension and Tristan da Cunha"
coun_skn="Saint Kitts and Nevis"
coun_sl="Saint Lucia"
coun_sm="Saint Martin (French part)"
coun_spm="Saint Pierre and Miquelon"
coun_svg="Saint Vincent and the Grenadines"
coun_sam="Samoa"
coun_smo="San Marino"
coun_stp="Sao Tome and Principe"
coun_sab="Saudi Arabia"
coun_sen="Senegal"
coun_ser="Serbia"
coun_sey="Seychelles"
coun_sil="Sierra Leone"
coun_smd="Sint Maarten (Dutch part)"
coun_slk="Slovakia"
coun_slv="Slovenia"
coun_sid="Solomon Islands"
coun_som="Somalia"
coun_saf="South Africa"
coun_sgs="South Georgia and the South Sandwich Islands"
coun_ssu="South Sudan"
coun_spn="Spain"
coun_sln="Sri Lanka"
coun_sud="Sudan"
coun_sur="Suriname"
coun_sjm="Svalbard and Jan Mayen"
coun_swl="Swaziland"
coun_swe="Sweden"
coun_swz="Switzerland"
coun_sar="Syrian Arab Republic"
coun_tp="Taiwan, Province of China"
coun_tas="Tajikistan"
coun_tur="Tanzania, United Republic of"
coun_thl="Thailand"
coun_til="Timor-Leste"
coun_tgo="Togo"
coun_tok="Tokelau"
coun_ton="Tonga"
coun_trt="Trinidad and Tobago"
coun_tun="Tunisia"
coun_tuk="Turkey"
coun_tis="Turkmenistan"
coun_tci="Turks and Caicos Islands"
coun_tuv="Tuvalu"
coun_uga="Uganda"
coun_ukr="Ukraine"
coun_uae="United Arab Emirates"
coun_ukm="United Kingdom"
coun_usmi="United States Minor Outlying Islands"
coun_ury="Uruguay"
coun_uzb="Uzbekistan"
coun_vat="Vanuatu"
coun_vbr="Venezuela, Bolivarian Republic of"
coun_vnm="Viet Nam"
coun_vib="Virgin Islands, British"
coun_vius="Virgin Islands, U.S."
coun_wf="Wallis and Futuna"
coun_wsh="Western Sahara"
coun_yem="Yemen"
coun_zam="Zambia"
coun_zbw="Zimbabwe"

//registerInfoNote.html
new_product_info="Get access to product support, software update notifications and information on new products when your register your WiFi extender."
register_at="You can also register at <a href="http://my.netgear.com/registration" target="_blank">my.netgear.com/registration</a>"

//screen8-extender-good.html
wifi_setting="WiFi Settings"
pwd_setting="Password Settings"
do_more="Do More"
acc_schedule="Access Schedule"
wifi_cov="WiFi Coverage"
fast_lane="FastLane"
usb_port="USB Port"
extender_conn_run="Your WiFi extender connection is up and running."
conn_again="Smart Setup"
conn_24g_netwk="Connection to Existing Network (2.4GHz)"
conn_5g_netwk="Connection to Existing Network (5GHz)"
extend_24g_status="Extender WiFi Status (2.4GHz)"
extend_5g_status="Extender WiFi Status (5GHz)"
wf_analytics_app="WiFi Analytics App"
opti_wifi="Optimize your WiFi network with the free app for Android."
install_now_mark="Install Now »"
help_inquer="Need Help?"
way_submit_question="Submit a question to our support team over chat, email or phone."
foot_lic="License"
foot_search="Search Help"

//screen8-extender-noConnection.html
info_improve_conn="Move your extender closer to your router to improve connection."

//wifiSettings.html
region_setting="Regional Settings:"
enable_2g_5g="Enable 2.4GHz & 5GHz WiFi"
enable_2g="Enable 2.4GHz WiFi"
enable_5g="Enable 5GHz WiFi"
broadcast_network="Broadcast this Network name (SSID)"
get_ip_dynamically="Dynamically get IP Address From Router"
wifi_device="WiFi Devices"
disable_access_ctrl="Disable Access Control"
add_wifi_dev="Add a WiFi Device"
pin_enable="Enable WPS PIN"
disable_pin_info="Auto disable the PIN after"
fail_entry="failed PIN entries, to prevent PIN compromise."
led_blink="The device WPS LED will keep blinking slowly if the PIN has been auto-disabled"
keep_24g_wifi_setting="Keep existing WiFi settings for 2.4GHz network"
keep_5g_wifi_setting="Keep existing WiFi settings for 5GHz network"
wifi_disable="Disable WiFi"

//pwdSettings.html
pwd_protect_info="Turn on or off password protection or change a password to protect unauthorized access to the extender web menu and Smart Setup."
pwd_on="Password On"
pwd_off="Password Off"
new_user_nm="New User Name"
new_pwd_char="New Password (10-32 characters):"

//backUpSettings.html
create_backup_file="Create a backup file of your current WiFi Extender settings."
backup_upper="BACKUP"
restore_settings_way="Restore settings from a previously saved file."
browse_upper="BROWSE"
reset_lower="Reset"
restore_default_setting="Restore all settings to factory defaults."
reset_upper="RESET"
restore_upper="RESTORE"

//fwUpdate.html
check_update="Check for Update"
check_online="CHECK ONLINE"
upload_file="Upload Update File"
select_update_file="Locate and select the update file on your device."
upload_upper="UPLOAD"

//accessSchedule.html
wifi_access_schedule="You can use this feature to control access to all users during specific periods of the day. You can also use this feature for parental controls or security. Access Schedule disables your Internet access based on times you set."
access_on="Access Schedule On"
access_off="Access Schedule Off"
sel_days="Select Days"
only_weekdays="Weekdays Only"
only_weekend="Weekend Only"
time_for_days="Same Time for All Days"
select_time_for_days="Select Times for Selected Day"
24_hours="24 Hours"
sys_clock="Extender Clock"
sync_with_clock="Sync Clock"
maintain_internal_clock="Set the internal WiFi Extender clock. Your settings need to be accurate in order for WiFi access schedules to work correctly."

//accessScheduleNote.html
access_schedule_inter="Enabling Access Schedule will also disable your Internet access for both wireless and wired connections on specified days."

//guestNetwork.html
guest_network_info="A guest network creates a separate wireless network for guests. Wireless devices can join the guest network and connect to the Internet without accessing your private network."
band_mark="Band"
ssid_mark="Network Name (SSID)"
broadcast_ssid="Broadcast Network Name (SSID)"
add_guest_netw="Add a Guest Network"

//connectedeviceInfo.html
conn_dev_for="Connected Devices for:"

//wifiCoverage.html
adjust_extend_wifi_info="Adjust the output and range of your extended WiFi network. For a smaller coverage area, choose a lower output power percentage. For a larger coverage area, select a higher output power percentage."
wireless_out_power="Wireless Output Power"

//fastLane.html
fast_lane_head="FastLane Technology"
enable_fastlane_info="Enabling FastLane Technology mode allows you to use both WiFi bands to establish one super high-speed connection; ideal for HD streaming & gaming."
basic_option="<strong>Basic</strong> - Connect devices on both 2.4 and 5Ghz bands at the same time. Extends both WiFi bands at the same time (2.4 and 5Ghz), but reduces WiFi performance."
fastlane_option="<strong>FastLane Technology</strong> - Offers maximum performance but limits connection to one band (2.4 or 5GHz)."
extender_info_one="Router-to-Extender in 2.4 GHz only and Extender-to-Device in 5GHz only ."
extender_info_two="Router-to-Extender in 5GHz only and Extender-to-Device in 2.4GHz only (Router must support 5GHz band)."

//usbPort.html
general_mark="General"
usb_port_on="USB Port On"
usb_port_off="USB Port Off"
share_content="Share Content"
share_printer="Share Printer"

update_mark="Update"
network_neighbor="Network Neighborhood"
conn_device="Connected Devices"
avai_space="Available Space"
add_folder_sign="Add Folder"
content_scan_tip="Content Scanning (when new files are added)"

//csrf_timeout.htm
csrf_timeout="Sorry,your timestamp is expired.<br> Please click the menu to re-enter the page."

//web_login.html
login_page="User Login"
login_email="Email"
login_passwd="Password"
login_checkbox="Remember me"
login_btn="LOG IN"
login_help="Username & Password Help"
login_setup_btn="NEW EXTENDER SETUP"
login_error="Username and password do not match."
extender_setup="Create Account"
passwod_recovery="Your email and password are listed below:"
extender_accept_1="I Accept to the Terms of Service"
extender_accept_2="All fields required unless marked as "optional""

//extra strings
pwd_tip_text="Use this password for the 5GHz network"
foot_search_ph="Type search term..."
setup_later="Setup Later"
later_note="You can skip setup by pressing Setup Later. You will have to connect the extender to your existing network by running setup at a later stage."

//AP mode page
connection_issue_note1="The extender can't connect to the router."
connection_issue_note2="Make sure that the Ethernet cable is securely plugged into the port on the extender and the router."
ap_select_no_1="I want to configure the Extender myself."
ap_select_no_2="I want to configure static IP address for Access Point mode."
ap_try_again_or_manual_config="Do you want Smart Setup to try again?"
ap_fixed_ip_setting_note="Note: After you click <b>Next</b>, this extender will be assigned a new IP address. When it happens, your browser might be disconnected from the network. To reconnect to the extender, you may need to change your device's IP address. Then close the browser window, and launch your browser again."

browser_support="NETGEAR recommend you to upgrade your Internet Explorer browser to Internet Explorer 8 or higher to use NETGEAR genie for installation."

pwd_short="Too short"
pwd_long="Too long"
pwd_weak="Weak"
pwd_good="Good"
pwd_strong="Strong"
pwd_same="Username and Password identical."
pwd_no_match="NO MATCH!"
pwd_error_1="The password should consist of "
pwd_error_2=" characters"
see_more="See More"
see_less="See Less"

amber_info="Amber indicates <b>good connection</b>"
green_info="Green indicates <b>best connection</b>"
red_info="Red indicates <b>poor connection</b>"
closer_extender="Move the computer or mobile device closer to the extender"
closer_router="Move the extender closer to the router."
extender_str="Extender"
device_str="Device"
pwd_answer="Answer"
ethernet_link="Ethernet"
re_enter_pwd="Re-enter Password"
router_str="Router"

password_tip="Choose a password for your extender settings pages."
question_tip="If you forget your user name or password, you can answer this question to retrieve them."
error_email_addr="Invalid email address."

mode_repeater="WiFi Range Extender"
mode_wifiwan="WiFi Range Extender"
mode_ap="WiFi Access Point"
mode_router="WiFi Access Point"

ques1_0="Select a question"
ques1_1="What's the name of the first NETGEAR product you purchased?"
ques1_2="What was the name of the first school you attended?"
ques1_3="What is your oldest sister's first name?"
ques1_4="What is your oldest brother's first name?"
ques1_5="In what city were you born?"
ques1_6="What is your grandmother's first name?"
ques1_7="What is your grandfather's first name?"
ques1_8="In what year (YYYY) did you graduate from high school?"
ques1_9="What is the name of your first employer?"
ques2_0="Select a question"
ques2_1="What is your youngest sister's first name?"
ques2_2="What is your youngest brother's first name?"
ques2_3="What is your father's middle name?"
ques2_4="What is your mother's middle name?"
ques2_5="What was the first name of your first manager?"
ques2_6="In what city was your mother born?"
ques2_7="In what city was your father born?"
ques2_8="What is your best friend's first name?"

info_signal_strength="Signal Strength"

ca_15_repeater_24g_new="2.4GHz Extender Network"
ca_15_repeater_5g_new="5GHz Extender Network"
network_name="Network Name"
network_ssid="Network Name (SSID):"
wlan_ap_security="Security:"
sec_off="None"

lan_mark_ip="IP Address"
lan_mark_subnet="IP Subnet Mask"
lan_mark_gateway="Gateway IP Address"
basic_int_primary_dns="Primary DNS"
basic_int_second_dns="Secondary DNS"

sn_registered="This serial number is already registered in our system. Thank you for registering your product."
register_fail="Registration Fail, error code is "
check_answer_info="The information you entered does not match what is saved on the extender. Please enter it again."
email_tip="The email address will be used as the administration account name for this product as well as the customer portal site at my.netgear.com. If you have previously created an account at my.netgear.com, please use the same email address here."

DFS_radar_mark="This DFS channel is not allowed to use because the Radar was detected before."
DFS_radar_mark0=" You can change another channel or wait "
DFS_radar_mark1=" min(s) "
DFS_radar_mark2=" second(s) to use this channel."
error_500="Registration could not be completed at this time. Try again later."
error_401="Invalid Serial number."
error_403="You entered an invalid email address or you did not enter an email address. Try again."
error_404="You entered an invalid first name or you did not enter a first name. Try again."
error_405="You entered an invalid last name or you did not enter a last name. Try again."
error_406="You entered an invalid country code or you did not enter a country code. Try again."
error_407="You provided invalid email information or you did not provide email information. Try again."
error_408="You entered an invalid purchase date or you did not enter a purchase date. Try again."
error_409="Unknown error. Request failed."
coun_Kosovo="Kosovo"
default_passwd_not_allow="You cannot use the default admin password. You must change the admin password."
weak_password_rule="We recommend that your password meets the following conditions:"
weak_password_rule1="In addition, we recommend that your password meets three of the following four conditions:"
weak_password_rule1_1="At least one uppercase character"
weak_password_rule1_2="At least one lowercase character"
weak_password_rule1_3="At least one number"
weak_password_rule1_4="At least one special character, such as @#&..."
weak_password_rule2="Contains 6 to 32 characters"
weak_password_rule4="Contains no more than two identical characters in a row"

weak_password_rule2_new="Contains 10 to 32 characters"
weak_password_rule_new="The password must meet the following conditions:"
passwd_length_10="Minimum password length is 10 characters!"
router_password_reset1="Your Device is disabled, Please try again in 1 minute."
router_password_reset5="Your Device is disabled, Please try again in 5 minutes."
