﻿////English////
///////////////////////////////Please keep the line below in English////////////////////////////////////////////////////////////////
lang_ori_english="Auto English French German Italian Korean Chinese Russian Spanish Swedish Dutch Japanese"
////////////////////////////////Please keep the line below as it is ///////////////////////////////////////////////////////////////
lang_ori="Auto English Français Deutsch Italiano 한국어 中文 Русский Español Svenska Nederlands 日本語"
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
version="1.0.0.64_2.1.30.1"
language="English"
support_url="http://support.netgear.com"
help_support_url="http://support.netgear.com/product/EX3700"
ch_lang_head="GUI Language"
ch_lang_head_update="GUI Language Update"
know_href="http://kb.netgear.com/app/answers/detail/a_id/23568"
docu_href="http://downloadcenter.netgear.com"
multi_wait="Downloading and updating the language table, please wait for approximately one minute..."
upg_md5_check_error="Md5 checksum error!"
gen_value="Generate"
language_upg_head="Language Table Upgrade Assistant"
//019_dni_send_wan_lan_conflict.patch
important="Important Update"
IP_update_info1_1="To avoid a conflict with your Internet Service Provider, your router's IP address has been updated to "
IP_update_info2="You must now update the IP addresses in your router's configuration settings for each relevant service,such as port forwarding and IP address reservation."
//mul-SSID guest network settings
guest_menu="Guest Network"
guest_head="Guest Network Settings"
guest_network="Network Profiles"
guest_enable="Enable Guest Network"
guest_enable_broad="Enable SSID Broadcast"
guest_access="Allow guest to access My Local Network"
guest_name="Guest Wireless Network Name (SSID)"
guest_table_profile="Profile"
guest_table_ssid="SSID"
guest_table_secur="Security"
guest_table_broad="Broadcast SSID"
//mulPPPoE 2
pppoe1="PPPoE Session 1"
mul_session1="Session 1"
mul_session2="Session 2"
pppoe2_type="PPPoE Session 2 Type"
mulpppoe_setting_jp="Policy Configuration"
flet_square_pppoe_session="Flet's Square/Other PPPoE Session"
pppoe2_enable="Enable"
block_ser_port_range="Port Range"
pppoe2_session_policy="PPPoE Session 2 Policy"
block_ser_setup_ip_jp="IP Address"
//vpn passthrough
info_language_ver="GUI Language Version"
//disable IPv6 passthrough in wan page

//080927 triggering
trigger_add_service="Add Service"
trigger_del_service="Delete Service"

//new Strings 080831
close_mark="Close"
passwd_length_32="Maximum password length is 32 characters!"

firmware_check="Firmware Version Check"
wizard_static_head="Static IP (Fixed) Addresses"

from_mark="From"
to_mark="To"
login_mark="Logged in"
logout_mark="Logged out"

//new string 080912

//upgrade warning

//colect all noEnglish to Strings for ML
accept_mark="Accept"
remote_managing_device="is managing this device."

ml_failDownload="The extender failed to download the language table you requested. Please try again later."
upLangTableWait="Downloading and updating the language table, please wait for approximately one minute... "

auto_update_header="Checking for firmware updates"




fail_down_confile_head_lang="Language"

wps_clientPinWrong="The client's PIN is not correct."
//colect all noEnglish to Strings for ML
generate_mark="Generate"
clear_log="Clear Log"
send_log="Send Log"
log_send_email_off="If you want to send an e-mail notice, turn on e-mail notification on the E-mail screen."
wizard_detecting="Detecting connection type on the Internet port"
wizard_pls_wait="Please wait a moment..."
wizard_detect_type="Successfully detected the type of Internet connection you have."
wizard_dhcp_type="Dynamic IP (DHCP) detected"
wizard_static_type="Static (fixed) IP detected"


test_display="This page will automatically display the NETGEAR website if a successful Internet connection is detected."
test_connect2server="Connecting to server"
test_success="Success"
test_getIPAddr="Getting IP address"
test_trying="Trying"

wps_cancelByuser="WPS procedure has been canceled by user."
wps_failAdd="Failed to add a wireless client to the network."
wps_client="The wireless client"
wps_client_add="has been added to the network successfully."
wps_note_WL_change="Note: The wireless settings have been changed."
wps_check_NewWLOK="Click <b>OK</b> to check the new wireless settings..."
wps_authClient="Authenticating the client..."
wps_send2Client="Sending configuration data to the client..."
wps_collectInfo="Collecting the client's information..."


progress_update="Progress"
pls_wait_update="Please wait ..."
//Select Region 3400
region_select="Region Selection"
//change language
select_language="Select language"
//common
coun_select1="--- Select Region ---"
coun_af="Africa"
coun_as="Asia"
coun_au="Australia"
coun_ca="Canada"
coun_eu="Europe"
coun_fr="France"
coun_is="Israel"
coun_jp="Japan"
coun_mx="Mexico"
coun_sa="South America"
coun_us="United States"
coun_ko="Korea"
coun_middle_east="Middle East"
coun_ru="Russia"
coun_ch="China" 
coun_in="India"
coun_ma="Malaysia"
coun_middle_east_asy="Middle East(Algeria/Syria/Yemen)"
coun_middle_east_ilq="Middle East(Iran/Labanon/Qatar)"
coun_middle_east_tetk="Middle East(Turkey/Egypt/Tunisia/Kuwait)"
coun_middle_east_sa="Middle East(Saudi Arabia)"
coun_middle_east_uae="Middle East(United Arab Emirates)"
coun_si="Singapore"
coun_tw="Taiwan"
r_enable="Enable"
r_disable="Disable"
r_off="NONE"
r_wep="WEP"
r_wpa="WPA-PSK [TKIP]"
r_wpa2="WPA2-PSK [AES]"
r_wpas="WPA-PSK [TKIP] + WPA2-PSK [AES]"
r_yes=" Yes "
r_no=" No "
on_mark="On"
off_mark="Off"
client_con_mark="Connected"
client_discon_mark="Disconnected"
upg_mark="Upload"
apply_mark="Apply"
cancel_mark="Cancel"
refresh_mark="Refresh"
add_mark="Add"
edit_mark="Edit"
delete_mark="Delete"
deleteall_mark="Delete All"
never_mark="Never"
always_mark="Always"
per_schedule_mark="Per Schedule"
test_mark="Test"
ok_mark="OK"
check_mark="Check"
backup_mark=" Backup "
erase_mark="Erase"
next_mark=" Continue"
wps_next_mark="Next"
back_mark_2="Back"
retry_mark=" Try again "
quit_mark=" Quit "
yes_mark=" Yes "
no_mark=" No "
show_sta_mark="Show Statistics"
connect_status_mark="Connection Status"
release_mark="Release"
renew_mark="Renew"
connect_mark="Connect"
disconnect_mark="Disconnect"
close_win_mark="Close Window"
show_status_mark="Show Status"
failure_head="Failure"
warning_head="Warning"
few_second="This page will automatically return to the previous page in a few seconds..."

//index.html
device_title="NETGEAR EX3700"
alert_browser="Please upgrade to a version 4 or higher browser so that you can use this setup tool (and see lots of great sites on the Internet! )"
changelanips="Do you want to change your LAN IP to "
changelanip_renew="\nYou should release and renew PC's IP address after click  \"Apply\""

//info.html
info_mark_head="Status"
info_mark_name="Account Name"
info_mark_mac="MAC Address"
info_mark_virmac="Virtual MAC Address"
info_mark_reg="Region"
info_mark_ver="Firmware Version"
info_mark_cur="LAN Port"
info_mark_ip="IP Address"
info_mark_mask="Subnet Mask"
info_mark_dhcp="DHCP Client"
info_mark_ssid="Name (SSID)"
//For 3400
info_mark_2g_ssid="Name (2.4G SSID)"
info_mark_5g_ssid="Name (5G SSID)"
info_mark_chan="Channel"
info_mark_gate="Default Gateway"
info_mark_wireless_port="Extender Wireless Setting"
router_status_hwversion="Hardware Version"
router_status_connect="Connection Status to Existing Network"
router_status_int_port="Internet Port"
router_status_dhcp="DHCP"
router_status_ip_sub="IP Subnet Mask"
router_status_domain_ser="Domain Name Server"
adva_wlan_mode="Mode"
router_status_lan_port="LAN Port"
router_status_wireless_port="Wireless Settings"
router_status_ip="Extender IP Info"
info_client_status="Connection Status"
info_link_rate="Link Rate"
info_signal_strength="Signal Strength"
info_channel="channel"
info_Security_Options="Security Options"
setup_head="Setup"
router_repeater="Wireless Repeating as Extender"
info_Passphrase="Passphrase"
router_mac_link_status="Link Status"
router_mac_link_rate="Link Rate"

//lan.html
lan_mark_head="LAN Setup"
lan_mark_name="Device Name"
lan_mark_ip_head="LAN TCP/IP Setup"
lan_mark_ip="IP Address"
lan_mark_subnet="IP Subnet Mask"
lan_mark_dhcp="Use Router as DHCP Server"
lan_mark_gateway="Gateway IP Address"
lan_dhcp_start="Starting IP Address"
lan_dhcp_end="Ending IP Address"

//wlan.html
wlan_ap_transmit="Use the same wireless settings as my existing wireless router"
wlan_ap_security="Security:"
ap_sc_enable="enable"
ap_sc_disable="disable"
wep_same_security="The WEP key setting in AP has to be consistent as configured in client mode. The WEP key settings will be applied to the wireless setting. Please update the WEP key settings on your wireless clients in  order to connect to the extender." 
wep_apsame_toclient="The WEP key setting has to be consistent as configured as your existing router's setting"
wlan_mark_ws="Wireless Settings"
//For 3400
wlan_2g_network_mark="Wireless Network (2.4GHz b/g/n)"
wlan_5g_network_mark="Wireless Network (5GHz a/n/ac)"
wlan_network_mark="My EX3700 Wireless Network "
wlan_mark_ssid="Name (SSID):"
wlan_mark_bc="SSID Broadcast"
wlan_mark_reg="Region:"
wlan_mark_chan="Channel:"
wlan_mark_mode="Wireless mode:"
wlan_mode_54="Up to 54 Mbps"
wlan_mode_145="Up to 145 Mbps"
wlan_mode_300="Up to 300 Mbps"
wlan_wlacl="Wireless Card Access List"

//11ac 1x1 wireless modes
wlan_mode_87="Up to 87 Mbps"
wlan_mode_200="Up to 200 Mbps"
wlan_mode_433="Up to 433 Mbps"

//11ac 2x2 wireless modes
wlan_mode_156="Up to 156 Mbps"
wlan_mode_173="Up to 173 Mbps"
wlan_mode_360="Up to 360 Mbps"
wlan_mode_400="Up to 400 Mbps"
wlan_mode_780="Up to 780 Mbps"
wlan_mode_866="Up to 867 Mbps"

//11ac 3x3 wireless modes
wlan_mode_260="Up to 260 Mbps"
wlan_mode_289="Up to 289 Mbps"
wlan_mode_540="Up to 540 Mbps"
wlan_mode_600="Up to 600 Mbps"
wlan_mode_1170="Up to 1170 Mbps"
wlan_mode_1300="Up to 1300 Mbps"

//security
sec_type="Security Options"
sec_off="None"
sec_wep="WEP"
sec_wpa="WPA-PSK [TKIP]"
sec_wpa2="WPA2-PSK [AES]"
sec_wpas="WPA-PSK [TKIP] + WPA2-PSK [AES]"
sec_pr_wpa="Security Options (WPA-PSK)"
sec_pr_wpa2="Security Options (WPA2-PSK)"
sec_pr_wpas="Security Options (WPA-PSK + WPA2-PSK)"
sec_wep1="Wired Equivalent Privacy (WEP)"
sec_auth="Authentication Type"
sec_enc="Encryption Strength"
sec_auto="Automatic"
sec_share="Shared Key"
sec_64="64 bit"
sec_128="128 bit"
sec_enc_head="Security Encryption (WEP)"
sec_key="Security Encryption (WEP) Key"
sec_key1="Key 1:"
sec_key2="Key 2:"
sec_key3="Key 3:"
sec_key4="Key 4:"
sec_enct="Encryption Type"
sec_tkip="TKIP"
sec_phr="Password (network key):"
sec_863="(8-63 characters)"
sec_863_or_64h="(8-63 characters or 64 hexdigits)"
sec_aes="AES"
sec_tkip_aes="TKIP and AES"
wep_or_wps="WEP security with shared key authentication does not work with WPS. WPS will be inaccessible. Do you want to continue?"
tkip_or_wps_v20="WEP or WPA-PSK [TKIP] security authentication cannot work with WPS. WPS is going to become inaccessible. Do you want to continue?"
ssid_bc_or_wps_v20="WPS requires SSID broadcasting in order to work. If you make this change, WPS will become inaccessible. Do you want to continue?"
acl_or_wps_v20="Turn access control on with empty access list does not work with WPS. WPS will be inaccessible. Do you want to continue?"
open_or_wps_v20="Are you sure that you do not want any wireless security on your network? This setting is typically used for wireless hot spots that are open to public access. Do you want to continue?"
//access control

//internet setting
internet_head="Device's IP Address"
menu_internet_head="IP Address Setup"
basic_top_info="Does your Internet connection require a login?"
basic_int_intip="Internet IP Address"
basic_int_autoip="Get Dynamically IP Address From Router"
basic_int_static_ip="Use Static IP Address"
basic_int_gateway="Gateway IP Address"
basic_int_dns="Domain Name Server (DNS) Address "
basic_int_autodns="Get Automatically from ISP"
basic_int_these="Use These DNS Servers"
basic_int_primary_dns="Primary DNS"
basic_int_second_dns="Secondary DNS"
basic_int_mac="Router MAC Address"
basic_int_default_mac="Use Default Address"
basic_int_computer_mac="Use Computer MAC Address"
basic_int_this_mac="Use This MAC Address"
basic_int_dynamic_ip="Use Dynamic IP Address"
basic_int_connection_mode="Connection Mode"
basic_mode_dial="Dial on Demand"
basic_mode_always="Always On"
basic_mode_manual="Manually Connect"
basic_test_note="This Page will Automatically Display the NETGEAR Website if a Successful Internet Connection is Detected."
basic_close_button="Close Window"

//pppoe
basic_intserv_provider="Internet Service Provider"
basic_intserv_pppoe="PPPoE"
basic_intserv_pptp="PPTP"
basic_intserv_bpa="Telstra Bigpond"
basic_pppoe_login="Login"
basic_pppoe_passwd="Password"
basic_pppoe_serv_name="<b>Service Name</b> (If Required)"
//pptp
basic_pptp_myip="My IP Address"
basic_pptp_servip="Server Address"
basic_pptp_connection_id="Connection ID/Name"
//bpa
basic_bpa_auth_serv="Authentication Server"
//mulpppoe
pppoe2_policy_setting="PPPoE Session 2 Policy Setting"
pppoe2_west="NTT West"
pppoe2_east="NTT East"
pppoe2_session_type="Session Type"
pppoe2_domain_name="Domain Name"
pppoe2_port="Port"

content_head="Content Filtering"

//logs
logs_head="Logs"

//Block Sites
block_sites_head="Block Sites"
content_block_keyword_block="Keyword Blocking"
content_block_type_keyword="Type keyword or domain name here."
content_block_contain="Block sites containing these keywords or domain names:"
content_block_add="Add Keyword"
content_block_del="Delete Keyword"
content_block_clear="Clear List"
content_block_allow_trustedip="Allow trusted IP address to visit blocked sites"

//Block Services
block_serv_head="Block Services"
block_ser_services_block="Services Blocking"
block_ser_service_table="Service Table"
block_ser_service_type="Service Type"
block_ser_service_ip="IP"

//block services add
block_ser_setup="Block Services Setup"
block_ser_setup_userdefined="User Defined"
block_ser_setup_ftp="FTP"
block_ser_setup_netmeet="NetMeeting"
block_ser_setup_telnet="Telnet"
block_ser_setup_pro="Protocol"
block_ser_setup_tcp="TCP"
block_ser_setup_udp="UDP"
block_ser_setup_tcp_udp="TCP/UDP"
block_ser_start_port="Starting Port"
block_ser_end_port="Ending Port"
block_ser_setup_type="Service Type/User Defined"
block_ser_setup_filter="Filter Services For"
block_ser_setup_thisip="Only This IP Address"
block_ser_setup_to="to"
block_ser_setup_allip="All IP Addresses"


//block schedule
schedule_head="Schedule"
schedule_days="Days to Block"
schedule_everyday="Every Day"
schedule_sun="Sunday"
schedule_mon="Monday"
schedule_tue="Tuesday"
schedule_wed="Wednesday"
schedule_thu="Thursday"
schedule_fri="Friday"
schedule_sat="Saturday"
schedule_time="Time of day to block:"
schedule_24hour="(use 24-hour clock)"
schedule_allday="All Day"
schedule_start="Start Blocking"
schedule_hour="Hour"
schedule_min="Minute"
schedule_end="End Blocking"



//email
email_head="E-mail"
email_sent_logs="Send alerts and logs through e-mail"
email_server="Your Outgoing Mail Server"
email_address="Send to This E-mail Address"
email_turn_on="Turn E-mail Notification On"
email_sent_immediately="Send Alert Immediately"
email_visit_block="When someone attempts to visit a blocked site"
email_schedule="Send logs according to this schedule"
email_full="When log is full"
email_hourly="Hourly"
email_daily="Daily"
email_weekly="Weekly"
email_none="None"
email_day="Day"
email_time="Time"
email_timezone="Time Zone"
email_auto_adjust="Automatically adjust for daylight savings time"
email_authen="My mail server requires authentication"
//ntp
ntp_curtime="Current Time"

manage_head="Maintenance"
//change password
passwd_head="Set Password"
passwd_curpas="Old Password"
passwd_setpas="Set Password"
passwd_repas="Repeat New Password"
passwd_defpas="Restore Default Password"
passwd_defpas_y="Yes"
passwd_defpas_n="No"

//upgrade firmware
upgrade_head="Firmware Update"
upgrade_select_disk="Locate and select the upgrade file from your hard disk: "
upgrade_mark="Upload"
upgrade_new_version="Check for new version online"
upgrade_upon="Check for new version upon log-in"
upgrade_note1="Note: It will take about 3 minutes for firmware upgrade. "
upgrade_note2="Please don't turn off the power or press reset button. "


//Restore Factory Default

//Station List 
stalist_Status="Status"

//Reboot AP

adva_head="Advanced"

//Antenna Contrl

//Advanced Wireless Settings
wlan_adv_head="Advanced Wireless Settings"
wlan_adv_szRts_11g="CTS/RTS Threshold (1-2347)"
wlan_adv_szFrag_11g="Fragmentation Length (256-2346)"
wlan_adv_wps="WPS Settings"
wlan_adv_routerpin="Extender's PIN"
wlan_adv_endis_pin="Disable Extender's PIN"
//For 3400
wlan_adv_2g_keep="Keep Existing Wireless Settings (2.4GHz b/g/n)"
wlan_adv_5g_keep="Keep Existing Wireless Settings (5GHz a/n/ac)"

adva_wlan_2g_setting="Wireless Advanced Settings (2.4GHz b/g/n)"
adva_wlan_5g_setting="Wireless Advanced Settings (5GHz a/n/ac)"
wlan_adv_keep="Keep Existing Wireless Settings"

adva_wlan_setting="Advanced Wireless Settings"
adva_wlan_router="Enable Wireless Access Point"
adva_wlan_ssid_broadcast="Enable SSID Broadcast"
adva_wlan_wmm="Enable WMM"
adva_wlan_pream="Preamble Mode"
adva_wlan_pream_long="Long Preamble"
adva_wlan_pream_short="Short Preamble"
adva_wlan_pream_auto="Automatic"
adva_wlan_acl="Wireless Card Access List"
adva_wlan_acl_on="Enable Access Control"
adva_wlan_devicename="Device Name"
adva_wlan_acl_mac="Mac Address"
adva_wlan_acl_entry="Wireless Card Entry"
adva_wlan_acl_cards="Available Wireless Cards"

//wireless bridging
wds_dfgate="Default Gateway"
wds_signalstrength="Signal Strength"

//wan setup
wan_setup_head="WAN Setup"
adva_wansetup_spi="Disable Port Scan and DoS Protection"
adva_wansetup_dmz="Default DMZ Server"
adva_wansetup_rspToPing="Respond to Ping on Internet Port"
adva_wansetup_mtu="MTU Size"
adva_wansetup_byte="(in bytes)"
adva_wansetup_nat="NAT Filtering"
adva_wansetup_nat_secured="Secured"
adva_wansetup_nat_open="Open"
adva_wansetup_sipalg="Disable SIP ALG"
//static routes
static_router_head="Static Routes"
sta_routes_act="Active"
sta_routes_name="Name"
sta_routes_dest="Destination"
sta_routes_gateway="Gateway"
sta_routes_rtname="Route Name"
sta_routes_private="Private"
sta_routes_destip="Destination IP Address"
sta_routes_metric="Metric"

//upnp
upnp_head="UPnP"
adva_upnp_on="Turn UPnP On"
adva_upnp_timetolive="Advertisement Time to Live"
adva_upnp_advertime="Advertisement Period"
adva_upnp_min="(in minutes)"
adva_upnp_hops="(in hops)"
adva_upnp_table="UPnP Portmap Table"
adva_upnp_int="Int. Port"
adva_upnp_ext="Ext. Port"

//Dynamic DNS
ddns_head="Dynamic DNS"
ddns_use_dnsser="Use a Dynamic DNS Service"
ddns_serpro="Service Provider"
ddns_hostname="Host Name"
ddns_username="User Name"
ddns_use_wildcards="Use Wildcards"

//remote management
remote_head="Remote Management"
enable_remote="Turn Remote Management On"
remote_addr="Remote Management Address"
allow_remote_access_by="Allow Remote Access By"
remote_this_computer="Only This Computer"
remote_ip_rang="IP Address Range"
remote_everyone="Everyone"
remote_port_num="Port Number"

//Port Forwarding / Port Triggering
port_forward_trigger_head="Port Forwarding / Port Triggering"
select_service_type="Please select the service type."
port_forward="Port Forwarding"
port_trigger="Port Triggering"
port_edit="Please select an item to edit."
port_del="Please select an item to delete."

forward_service_name="Service Name"
forward_server_ip="Server IP Address"
forward_start_port="Start Port"
forward_end_port="End Port"
forward_add_service="Add Custom Service"
forward_edit_service="Edit Service"

trigger_turn_on="Disable Port Triggering"
trigger_timeout="Port Triggering Time-out"
trigger_portmap_table="Port Triggering Portmap Table"
trigger_in_connect="Inbound Connection"
trigger_ser_user="Service User"
trigger_contype="Connection Type"

trigger_head="Port Triggering - Services"
trigger_service="Service"
trigger_port="Triggering Port"
any="Any"
single_addr="Single address"

forward_head="Ports - Custom Services"


websup_head="Web Support"
know_head="Knowledge Base"
docu_head="Documentation"
logout_head="Logout"
logout_info="Thank you for using the NETGEAR Web-based Configuration Utility. "
logout_goodbye="Goodbye"

gmt_11="(GMT-11:00) Midway Island, Samoa"
gmt_10="(GMT-10:00) Hawaii"
gmt_9="(GMT-09:00) Alaska"
gmt_8="(GMT-08:00) Pacific Time (US & Canada); Tijuana"
gmt_7_2="(GMT-07:00) Mountain Time (US & Canada)"
gmt_2="(GMT-02:00) Mid-Atlantic"
gmt_1="(GMT-01:00) Azores, Cape Verde Is."
gmt10_1="(GMT+10:00) Brisbane, Canberra, Melbourne, Sydney"
gmt11="(GMT+11:00) Magadan, Solomon Is., New Caledonia"

//rip
rip_dir="RIP Direction"
rip_ver="RIP Version"
rip_disable="Disabled"
rip1="RIP_1"
rip2b="RIP_2B"
rip2m="RIP_2M"
rip_both="Both"
rip_in="In Only"
rip_out="Out Only"

router_status_broadcast="Broadcast Name"

reservation_head="Address Reservation"
reservation_show="Address Reservation Table"

//wizard setup
wizard_head="Setup Wizard"
wizard_setup_yes="Yes."
wizard_setup_info1="The Smart Setup Wizard can detect the type of Internet connection that you have."
wizard_setup_info2="Do you want the Smart Setup Wizard to try and detect the connection type now?"
wizard_setup_no="No. I want to configure the router myself."
wizard_setup_have_connect="You already have a valid Internet connection."
wizard_setup_continue="Do you still want to continue with the Smart Setup Wizard?"
wizard_setup_nowan="No Internet Connection Detected"
wizard_setup_nowan_check="Please Check the Connections to the Internet WAN Port and Cable/DSL Modem."
//backup setting
backup_head="Other Settings"
backup_save_settings="Save a Copy of Current Settings"
backup_restore="Restore Saved Setting from a File"
backup_factory="Revert to Factory Default Settings"
restore_mark="Restore"
restore_def_load="Loading the Factory Default Settings will erase all the current settings."
restore_def_sure="Are you sure you want to do this ?"
restore_select_correct="Please select the correct configuration file."
restore_factory_title="Rebooting"
restore_factory_note_one="The Wireless-N 300 Universal WiFi Extender is rebooting..."

//auto upg
autp_upg_head="Checking for Firmware Updates"
auto_upg_check_ser= "The device is checking the NETGEAR server to see if updated firmware available for your Extender."
auto_upg_90s="This could take up to 30 seconds, please wait..."
auto_upg_nowan_head="No Internet Connection"
auto_upg_nowan="We cannot check if there is a new firmware because your extender is not connected to the Internet. Connect your extender to the Internet and try again."
auto_upg_detect="The Device can Auto Detect New Version of Firmware on the Internet."
auto_upg_start_detect="Do You Want to Start the Detection Now?"
auto_upg_not_display="Do not Display This Message Again"
autp_upg_firmware="Check for Updated Firmware Upon Log-in"
upg_error_img="Firmware upgrade failed. Please check your file."
//show statistics
statistics_sysuptime="System Up Time"
statistics_txpkts="TxPkts"
statistics_rxpkts="RxPkts"
statistics_coll="Collisions"
statistics_tx="Tx B/s"
statistics_rx="Rx B/s"
statistics_up="Up Time"
statistics_wan="WAN"
statistics_lan="LAN"
statistics_wlan="WLAN"
//For 3400
statistics_wlan1="WLAN1"
statistics_wlan2="WLAN2"
statistics_poll="Poll Interval"
statistics_set="Set Interval"
statistics_stop="Stop"
rang_pool="The valid range of Polling Interval is between 5 and 86400 seconds. "
block_ser_service_port="Port"

constatus_head="Connection Status"
constatus_subnet="Subnet Mask"
constatus_defgtw="Default Gateway"
constatus_dhcpser="DHCP Server"
constatus_dnsser="DNS Server"
constatus_obt="Lease Obtained"
constatus_exp="Lease Expires"
constatus_neg="Negotiation"
constatus_auth="Authentication"
constatus_sess2="PPPoE Session 2"
constatus_con_sub="Getting Network Mask"
//traffic meter
traffic_head="Traffic Meter"
traffic_int="Internet Traffic Meter"
traffic_endis="Enable Traffic Meter"
traffic_volumn_ctrl="Traffic volume control by"
traffic_nolimit="No limit"
traffic_download="Download only"
traffic_dir="Both directions"
traffic_mon_limit="Monthly limit"
traffic_round_up="Round up data volume for each connection by"
traffic_time_ctrl="Connection time control"
mbytes="Mbytes"
hours="hours"
traffic_counter="Traffic Counter"
traffic_counter_restart="Restart traffic counter at"
traffic_onthe="On the"
traffic_day_of_month="day of each month"
traffic_btn_counter="Restart Counter Now"
traffic_ctrl="Traffic Control"
traffic_popup="Pop up a warning message"
traffic_before="Mbytes/Minutes before the monthly limit is reached"
traffic_when="When the monthly limit is reached"
traffic_turn_led="Turn the Internet LED to flashing green/amber"
traffic_block="Disconnect and disable the Internet connection"
traffic_statistics="Internet Traffic Statistics"
traffic_start="Start Date/Time"
traffic_current="Current Date/Time"
traffic_volumn_left="Traffic Volume Left"
traffic_period="Period"
traffic_connect_time="Connection Time"
traffic_hhmm="(hh:mm)"
traffic_volum_mbytes="Traffic Volume (Mbytes)"
traffic_avg_up="Upload/Avg"
traffic_avg_down="Download/Avg"
traffic_avg_total="Total/Avg"
today="Today"
yesterday="Yesterday"
this_week="This week"
this_month="This month"
last_month="Last month"
traffic_status="Traffic Status"
traffic_used="Amount Used"

//qos
qos_head="QoS Setup"
qos_enable_wmm="Enable WMM (Wi-Fi multimedia) settings"
qos_turn_qos_on="Turn Internet Access QoS On"
qos_policy="QoS Policy"
qos_priority="Priority"
qos_description="Description"
qos_add_prioritye="Add Priority Rule"
qos_add_head="QoS - Priority Rules"
qos_policy_for="QoS Policy for"
qos_priority_category="Priority Category"
qos_online="Online Gaming"
qos_ether="Ethernet LAN Port"
qos_application="Applications"
qos_skype="Skype"
qos_msn="MSN Messenger"
qos_yahoo="Yahoo Messenger"
qos_ipphone="IP Phone"
qos_aim="AIM"
qos_vonage="Vonage IP Phone"
qos_google="Google Talk"
qos_eva="Netgear EVA"
qos_add_application="Add a new application"
qos_counter_strike="Counter Strike"
qos_ageof_empires="Age of Empires"
qos_disable="Diablo II"
qos_everquest="Everquest"
qos_halflife="Half Life"
qos_quake2="Quake 2"
qos_quake3="Quake 3"
qos_unreal="Unreal Tournament"
qos_warcraft="Warcraft" 
qos_return_to="Return to Castle Wolfenstein"
qos_add_new_game="Add a new game"
qos_high="High"
qos_normal="Normal"
qos_highest="Highest"
qos_low="Low"
qos_specified_port="Specified Port Range"
qos_mac_device_list="MAC Device List"
qos_bandwidth_ctl="Turn Bandwidth Control On"
qos_uplink_width="Uplink bandwidth"
qos_width_maximum="Maximum"
qos_Kbps="Kbps"
qos_Mbps="Mbps"
qos_rule_list="QoS Priority Rule list"
qos_setrule_mark="Setup QoS rule"

//attach_device
attach_device="Attached Devices"
menu_attach_device="Network Devices"
wds_ipaddr="IP Address"
qos_mac="MAC Address"
attach_wired_device="Wired Devices"
attech_wireless_device="Wireless Devices(Wireless intruders also show up here)"
wait_message="<tr><td><br><br>Please wait a moment...<br><br></td></tr><tr><td colspan=2><img src=/liteblue.gif width=100% height=12></td></tr>"
table_bolder="<table border=1 cellpadding=2 cellspacing=0 width=100%>"
table_bolder0="<TABLE cellspacing=5 cellPadding=0 width=100% border=0>"
table_button="<table width=600 border=0 cellpadding=2 cellspacing=0>"
table_bg="<table width=600 border=2 cellpadding=2 cellspacing=0 bordercolor=#FFFFFF bgcolor=#E6E6E6>"
table_wel="<table border=0 cellpadding=10 cellspacing=10 width=720>"
table_100="<table width=100% height=100%>"
table_50="<table width=100% height=50%>"
bluebar="<TR><td colspan=2><img src=/liteblue.gif width=100% height=12></td></TR>"
hd_center="<td nowrap align=center>"
hd200_left="<td nowrap align=center width=200>"
hd2="<td nowrap colspan=2>"
hdr4_center="<td nowrap align=center rowspan=4>"
hd="<td nowrap>"
hd_r="<td nowrap align=right>"
hd_top="<td valign=top height=300pt>"
hd2_center="<td nowrap colspan=2 align=center>"
hd3_center="<TD align=center colSpan=3 nowrap>"
hd_right="<td nowrap align=right>"
hd2_right="<td nowrap colspan=2 align=right>"
hd_35="<td width=35 align=center valign=middle>"
hd_40="<td  rowspan=100 width=70 align=center valign=top>"
hd_550="<td width=550 valign=middle class=InductiveOptions>"
spacebar="<img src=/spacer.gif width=20 height=12 border=0>"
hp="<p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>"
menu_str="<TD vAlign=top><IMG height=7  src=/rbullet.gif width=7 align=top vspace=6></TD>"
pro100="<br><table width=90\% border=0 cellpadding=0 cellspacing=0><tr bgcolor=#dddddd><td width=100\% bgcolor=#0099cc align=right>100\%</td><td width=0 class=tableRowb></td></tr></table>"
pro1="<br><table width=90% border=0 cellpadding=0 cellspacing=0><tr bgcolor=#dddddd><td width="
pro2="\% bgcolor=#0099cc align=right><font color=#ff0000>"
pro3="%</font></td><td width="
pro4="\%></td></tr></table>"
ba="</b></p>"
passwd_len="Maximum password length is 32 characters!"
old_password_error="The old password is wrong!"
Progress="Progress"
search_for="Please wait ..."
ca_success_powered_on="Congratulations! You have now successfully turned on the Extender and connected <br> to it from a computer. Next you will need to connect the Extender to your <br> existing network."

//wds
wds_head="Wireless Repeating Function"
wds_enable="Enable Wireless Repeating Function"
wds_mac="Wireless MAC of this router"
wds_repeater="Wireless Repeater"
wds_repeater_ip="Repeater IP Address"
wds_dis_client="Disable Wireless Client Association"
wds_base_mac="Base Station MAC Address"
wds_base_station="Wireless Base Station"
wds_repeater_mac1="Repeater MAC Address 1"
wds_repeater_mac2="Repeater MAC Address 2"
wds_repeater_mac3="Repeater MAC Address 3"
wds_repeater_mac4="Repeater MAC Address 4"
wds_info_head="Wireless Repeating"


wait_upg_head="Firmware Upgrade"
wait_serv1="Attempting to connect to Netgear Server 1.  Please Wait..."
wait_serv2="Attempting to connect to Netgear Server 2.  Please Wait..."
wait_serv3="Attempting to connect to Netgear Server 3.  Please Wait..."
wait_cancel="Firmware upgrade abort!"
download_confile_fail="Firmware could not be downloaded from the NETGEAR server. Please check your Internet connection."
wait_return="This page will automatically return to the previous page in a few seconds..."
downloading_ver= "The device is Downloading the New Version Now. Please Wait."
traffic_secs="(secs)"
//upg data
//test page
test_head="Testing Internet Connection"
thank_login_info="Thank you for purchasing Wireless-N 300 Universal WiFi Extender.  Be sure to use firmware update assistant periodically to take advantage of improvement and feature additions Netgear offers for this product.<br><br>To take advantage of Wireless-N feature offered by the EX3700, use a wireless adapter with this logo."
//thank_login
thank_login_info_0="Thank you for purchasing NETGEAR's"
thank_login_info_1="Be sure to use the Firmware Upgrade Assistant periodically to take advantage of improvements and feature additions NETGEAR offers for this product.<br><br>" 
thank_login_info_2="To take advantage of the Wireless-N features offered by the"
thank_login_info_3="router, use a wireless adapter that displays this logo."
//timeout
timeout_fail="System Authentication Failed."
timeout_contact="Please contact your system administrator for the correct information."
ca_icon="<b>Connection Status</b>"

//welcome
welcome_dhcp_ip="Dynamic IP Address"
ca_10_wep="WEP key"
ca_12a_passphrase="Passphrase "
ca_12a_key="Key 1: "
ca_12_encr="Encryption Strength"
wlan_ap="Wireless AP"
setup_acl="Setup Access List"
trust_ip="Trusted IP Address"
update_head="Updating Settings"
wps_menu="Add WPS Client"
info_wps_status="Wi-Fi Protected Setup"
not_configured="Not Configured"
configured="Configured"

//CV_hidden

//WPS
add_wps_client_header="Add WPS Client"
add_wps_client_p="You can securely connect WiFi client devices to the extender using the WPS feature."
add_wps_client_text1="To use WPS, the WiFi device you are trying to connect must support WPS and be compatible with WPA security. Some of NETGEAR's products use the name Push 'n' Connect for WPS."
add_wps_client_text2="If your WiFi device does not support WPS, you must connect to your WiFi device manually."
add_wps_client_text3="Wi-Fi Protected Setup (WPS) is a network security standard that allow users to easily secure a wireless home network. WPS can automatically set up a network name (SSID) and strong wireless security for electronic devices."

wps_or_pin="Select a setup method:"
wps_push_button="Push Button (recommended)"
wps_push_button_text="You can either press the Push Button physically on the Wireless Extender or press the Button below (soft Push Button)."
wps_pin="PIN Number"
wps_pin_text1="If your Adapter supports WPS, please click on 'Generate a client Security Pin to input on the AP/Router/Gateway' and put the generated client PIN number here."
wps_enter_pin="Enter Client's PIN"
wps_connect_head="Connecting to New Wireless Client"
wps_connect_status_text="Click the WPS button in the software or press the WPS button on the WiFi device to start the connection."
wps_client_pin="The client's PIN is"
wps_add_failure="Failure"
wps_add_failure_text1="WPS procedure has timed out."
wps_add_failure_text2="Fail to add a wireless client to the network in "
wps_add_failure_min=" minutes."
wps_add_failure_gopage="Click OK to go back to the Wi-Fi Protected Setup page..."
wps_add_success="Success"
wps_add_success_text1="The wireless client 'name'(00-11-22-33-44-55) has been added to the network successfully."
browser_info="Your browser doesn't support print function!"

coun_select="Please select the correct region for your location."
wpa_phrase="The Passphrase can only be fit the value between 8~63 ASCII characters or 64 hexdigits."
gene_phrase="You should input 1 to 32 ASCII characters to generate 4 keys."
invalid_mac="Invalid MAC address."
enter_full_mac="Please enter a full MAC Address."
in_upgrade="The file name is null. Locate and select the upgrade file from your hard disk, please."
select_serv_edit="Please select a service to edit. "
no_serv_edit="There is no service to edit. "
select_serv_del="Please select a service to delete. "
no_serv_del="There is no service to delete. "
device_name_null="Device name can not be null."
device_name_error="Invalid device name."
//block sites
//block service setup
invalid_port="Invalid Starting or Ending Port value."
invalid_start_port="Invalid Starting Port value."
invalid_end_port="Invalid Ending Port value."
end_port_greater="The Ending Port value should be greater than or equal to the Starting Port value."
invalid_user_type="Invalid user defined service type."
invalid_ip_rang="Invalid IP address range."
//wlan_acl
device_name_dup="Duplicate Device Name!"
mac_dup="Duplicate MAC Address!"
acl_length_64="You have reached the maximum number of blocked devices. You can block up to 64 devices."
//mulpppoe
//upnp
//static routes
//wan setup
//lan
invalid_ip="Invalid IP Address, please enter again!\n"
invalid_mask="Invalid Subnet Mask, please enter again!\n"
same_subnet_ip_gtw="IP Address and Gateway IP Address must be in the same subnet!\n"
invalid_dhcp_startendip="Invalid DHCP ending and starting IP addresses. Please enter them again.\n"
//wan
invalid_gateway="Invalid Gateway IP Address, please enter again!\n"
invalid_primary_dns="Invalid Primary DNS Address, please enter again!\n"
oldpas_notmatch="The current password is incorrect!"
invalid_second_dns="Invalid secondary DNS address. Please enter it again.\n"
user_name_null="User name cannot be blank."
conflicted_with_wanip="The IP address conflicts with the WAN IP subnet. Please enter a different IP address."
//pppoe
idle_time_null="Please enter the idle time.\n"
invalid_static_ip="Invalid static IP address.\n"
invalid_myip="Invalid IP address. Please enter it again, or leave it blank.\n"
invalid_servip="Invalid server address. Please enter it again.\n"
//bpa
//trigger
trigger_length_20="The router can support 20 only port triggering rules."
trigger_ser_name_null="Service name cannot be null."
trigger_null=" must not be blank.\n"
trigger_1_65535=", must be in the range 1-65535.\n"
trigger_invalid="Invalid "
trigger_invalid_port_rang="Invalid inbound connection port range.\n"
timeout_null="Port triggering time-out cannot be null."
//forward
invalid_ser_name="Invalid service name."
//block site
//email
error_email_addr="Invalid email address."
//change password
newpas_notmatch="The password you typed does not match, please enter it again."
//ddns
hostname_null="Host name can not be blank."
password_null="Password cannot be blank."
status0="Dynamic DNS service is not enabled."
status2="No update action. There is no IP address on the Internet port."
//remote management
invalid_port_number="Invalid port number. It should be in the range 1024-65535. "
invalid_time="Invalid time input."
//welcome_alert
passphrase_short8="Insufficient passphrase length, should be minimum of 8 characters long."
passphrase_long63="Passphrase is too long, the maximum length should be 63 characters."
ca_client_settings="Connect to Existing Network"
welcome_setup="Would you like help with that?"
welcome_setup_yes="Yes,  Please guide me through the options. "
welcome_setup_no="No, I am an advanced user, and I can manually set up the connections. "
ca_wl_mode_145="130 Mbps"
ca_wl_mode_300="300 Mbps"
ca_update_message="Updating settings..."
ca_wait_message="Please Wait..."
ca_close_alert="Close this window. Most browsers will close when you click OK. \nIf your browser asks, follow the prompts to close and exit the browser."
//welcome,ca_*, leading
welcome_wait_connect="The router is detecting your type of Internet connection."
ca_10_maxkey="Maximum key length is "
ca_10_char=" characters."
ca_13_Change_p="This router includes a security feature that restricts access to the router's administration screens. Your router was manufactured with a default login and password: "
ssid_null="SSID can't be blank!"
ssid_not_allowed="Character is not allowed in SSID."
password_not_allowed="Invalid password"
acname_not_allowed="Invalid account name."
doname_not_allowed="Invalid domain name."
//wait for download
wait_new_version="A New Firmware Version is Found. Do You Want to Update to the New Version Now?"
no_new_version="Your firmware is up to date."
wait_download="The device is Downloading the New Version Now. Please Wait&hellip;"
upg_download_error="Firmware could not be downloaded from the NETGEAR server. Please check your Internet connection."
upg_upload_error="Fail to Upload Image."
wait_string="<tr><td>Please wait a moment...</td></tr>"
line_string="<tr><td colspan=2><img src=/liteblue.gif width=100% height=12></td></tr>"
old_ver="Current Version"
upload_ver="New Version"
download_image="The device is Downloading the New Version Now. Please Wait&hellip;"
download_image_fail="Fail to Upload Image."
//traffic
establish_connection="To reestablish the connection, click the Connect button."
round_up_data_error="Invalid round up data volume."
traffic_restart_counter="Restart Counter?"
//qos
qos_policy_name_null="The name of the QoS policy cannot be blank."
//wds
mac_basic_station_null="Please enter the base station MAC address."
all_mac_null="Please enter a repeater MAC address."

//backup setting
filename_null="Filename can not be blank!"
not_cfg="Please assign correct file. (File format is \"*.cfg\")"
invalid_filename="Invalid file name!"
ask_for_restore="Restoring settings will erase all your current settings. Are you sure you want to continue?"

//upgrade
//upgrade_turnoff_auto="The firmware upgrade can contain valuable enhancements.\n Are you sure you want to turn off automatic checking?\n After you turn it off, you can reenable it through the Router Upgrade screen."
not_img="Please assign the correct file. (The file format is \"*.img\")"
error_module="Error upgrade file module name! (Module name is \"EX3700\") "
upgrade_1="Warning! You are trying to download a non NA (world wide) firmware which is different from the NA firmware you had. Do you still want to continue?"
upgrade_2="Warning! You are trying to download a FR firmware with France language which is different from the NA firmware with English you had. Do you still want to continue?"
upgrade_3="Warning! You are trying to download a JP firmware with Japanese language which is different from the NA firmware with English you had. Do you still want to continue?"
error_firm_reg="Error firmware region!"
upgrade_4="Warning! You are trying to download a FR firmware with France language which is different from the world wide firmware with English you had. Do you still want to continue?"
upgrade_5="Warning! You are trying to download a JP firmware with Japanese language which is different from the world wide firmware with English you had. Do you still want to continue?"
upgrade_6="Warning! You are trying to download a NA firmware which is different from the non NA (world wide) firmware you had. Do you still want to continue?"
upgrade_7="Warning! You are trying to download a non FR (world wide) firmware which is different from the FR firmware you had. Do you still want to continue?"
upgrade_8="Warning! You are trying to download a GR firmware with German language which is different from the JP firmware with Japanese language you had. Do you still want to continue?"
upgrade_9="Warning! You are trying to download a NA firmware with English GUI which is different from the JP firmware with Japanese language you had. Do you still want to continue?"
upgrade_10="Warning! You are trying to download a world wide firmware with English GUI! After installing this Firmware the Router GUI will be in English! Do you still want to continue?"
upgrade_11="Warning! You are trying to download a NA firmware with English GUI which is different from the FR firmware with France language you had.\nPlease note that the usage of this Firmware may cause technical limitation like e.g. a reduction of available Wireless-Channel!\n Do you still want to continue?"
upgrade_12="Warning! You are trying to download a JP firmware with Japanese language which is different from the GR firmware with German language you had.\n Please note that the usage of this Firmware may cause technical limitation like e.g. a reduction of available Wireless-Channel!\n Do you still want to continue?"
oldver1="Warning!You are trying to download a firmware with version V"
oldver2=" is older than the firmware with V"
//wep
wpa_decribion1 = "If you have Access Control List (ACL) enabled in your router, please make sure you have added below MAC address into your router's Access Control List (ACL). "
wpa_decribion2 = "Your wireless adapter MAC address is "
wpa_decribion3 = " "
//wlan_adv
rts_range="CTS/RTS Threshold value is out of range [1 - 2347]."
fragmentation_range="Fragmentation Length value is out of range [256 - 2346]."
wds_auto_channel="The wireless repeating function cannot be used with Auto Channel.\nPlease change your channel settings before you enable the wireless repeating function."
//wps
error_4or8="A PIN is a string of 4 or 8 digits."
error_wps_pin="The checksum of PIN is not correct. Please check the PIN again.\n"
Authenticating_the_client="Authenticating the client"
wps_success_message_one="<tr><td align=center><b>The wireless client "
wps_success_message_two="has been added to the network successfully.</b></TD></TR>"
wps_success_message_three="Note: The wireless settings have been changed."
wps_status_one="Collecting the client's information..."
wps_status_two="Authenticating the client..."
wps_status_three="Sending configuration data to the client..."
wps_fail_add="Fail to add a wireless client to the network."
wps_fail_cancel="WPS procedure is cancelled by user."


// JavaScript Document
//081206
days_mark="days"

/////////////////////////////////////////////Extra  Strings////////////////////////////////////////////////////////////////
wlmode_utm130="Up to 130Mbps"
wlmode_utm270="Up to 270Mbps"
month_jan="Jan"
month_feb="Feb"
month_mar="Mar"
month_apr="Apr"
month_may="May"
month_jun="Jun"
month_jul="Jul"
month_aug="Aug"
month_sep="Sep"
month_oct="Oct"
month_nov="Nov"
month_dec="Dec"
fw_pt_unkown="Unknown"
bpa_have_login="BPA have already logged in"
bps_have_not_login="BPA have not logged in"
bps_is_login="BPA is logging in"
bpa_is_logout="BPA is logging out"
cannot_connect_netgear_server="Cannot connect to Netgear server"
dmz_server_not_a_valid_ip="DMZ Server is not a valid IP address."
dmz_server_not_lan="DMZ Server is not on the LAN subnet." 
err_gateway="Error: Gateway Address "
err_gateway_a_broadcast=" is a broadcast address in subnet "
err_gateway_a_network=" is a network address in subnet "
err_ip="Error: IP Address "
err_ip_a_broadcast_add="is a broadcast address in subnet "
err_ip_in_different_subnet=" is in a different subnet as the gateway address "
err_ip_a_add=" is a network address in subnet "
err_ip_mustnot_same_gateway="Error: IP address must not be the same as the gateway address"
faile_add_port_trigger="Failed to add / modify port trigger record! - %s"
faile_update_firmware="Failed to update Firmware"
faile_update_langtbl="Failed to update GUI language file"
faile_login_netgear_server="Fail to login to Netgear server"
firmware_invalid="Firmware is invalid"
langtbl_invalid="GUI language file is invalid"
firmware_unavailable="Firmware unavailable"
langtbl_unavailable="GUI language file unavailable"
inbound_overlap="Inbound connection port range overlap with other services."
inbound_connection_start="Inbound connection start or end port must not be "
invalid_idle_time="Invalid idle time. Please enter a correct number.\n"
invalid_server_name="Invalid service name."
ip_range_should_be="The IP address should be within the DHCP range. "
invalid_reserved_ip="Reserved IP cannot be the same as Router's LAN IP."
max_num_reserved_add_reached="Maximum Number of Reserved Address Reached."
memory_allocate_faile_reboot_req="Memory allocation failed. Suggest re-upgrade after reboot or revert to factory default settings."
no_internet_connection="No Internet Connection Available"
no_space_add_static_routes="No more space to add static routes."
no_space_add_keyword="No space to add new keywords"
not_memory_firmware_upgrade="Not enough memory for firmware upgrade"
not_memory_langtbl_upgrade="Not enough memory for GUI language upgrade"
not_memory_version_check="Not enough memory to perform version check"
pls_choose_reserve_add_del="Please choose a reserve address to delete."
pls_choose_reserve_add_edit="Please choose a reserve address to edit."
pls_connect_internet_port="Please Connect Internet Port and Retry"
pls_select_config_file="Please select correct configuration file."
port_conflict="Port conflict with other service."
reach_max_tab_size_20="The router can support only 20 port forwarding rules."
ip_cannot_be_router_lan_ip="Server IP address cannot be router's LAN IP address."
ip_must_be_lan_ip="Server IP address must be a LAN IP address."
name_inuse="Service name already in use."
name_inuse_cannot_use_twice="Service name already in use, and cannot be used twice."
name_cannot_change="Service name cannot be changed."
port_used="Service port is already used by another service."
user_must_be_lan_ip="Service user must be a LAN IP address."
session_connect="Session is connected."
session_not_connect="Session is not connected."
telstra_login_faile="Telstra Big Pond login failed"
old_paswd_wrong="The old password is wrong!"
port_static_reservation="The specified port(s) are being used by other configurations. Please check your configurations of Remote Management, Port forwarding, Port Triggering, UPnP Port Mapping table, RIP, and Internet connection type"
port_dynamic_reservation="The specified port(s) are being used by the system.The configuration will not take effect until the router restarts. Please power off the router and then power it up to restart the router."
port_internal_reservation="Triggering internal error!"
trigger_port_must_be="Triggering port must not be "
trigger_port_inuse="Triggering port is already used by another service."
unable_download_firmware_from_netgear="Firmware could not be downloaded from the NETGEAR server. Please check your Internet connection."
unable_download_langtbl_from_netgear="Unable to download GUI language file from Netgear server"
unable_get_latest_version_info="Unable to get latest version information"
unknown_error_num="Unknown Error: "
fw_remote_lan_ip_err="IP address cannot be on LAN subnet"
qos_table_full="QoS table is full."
qos_rule_exist="QoS rule already exist."
qos_rule_invalid_port="Invalid port settings."
trigger_ser_name_dup="Duplicate service name."
qos_rule_duplicate_name="Duplicate policy name."
qos_rule_port_conflict="Port conflicts with another rule."
qos_bw_min_exceed_max_err="Guaranteed bandwidth must not exceed Maximum bandwidth"
qos_bw_min_exceed_uplink_err="Total Guaranteed bandwidth of all priority classes must not exceed Uplink bandwidth"
qos_bw_max_exceed_uplink_err="Maximum bandwidth of a priority class must not exceed Uplink bandwidth"
wds_invalid_ip="Invalid Repeater IP address"
wds_invalid_mac_base_station="Base station MAC address cannot be the same as Router's MAC address"
wds_invalid_mac="Repeater MAC address cannot be the same as Router's MAC address"
wds_duplicate_mac="Duplicate Repeater MAC address"
error400="400 Bad Request"
error400_notsuport="This server does not support the operation requested by your client."
error401="401 Unauthorized"
error401_deny="Access to this resource is denied, your client has not supplied the correct authentication."
error404="404 Not Found"
error404_notavail="The resource you have requested is not available."
qos_apps_ssh="SSH"
qos_apps_vpn="VPN"
qos_apps_smtp="SMTP"
qos_apps_www="WWW"
qos_apps_dns="DNS"
qos_apps_icmp="ICMP"
qos_apps_emule="eMule / eDonkey"
qos_apps_kazaa="Kazaa"
qos_apps_gnutella="Gnutella"
qos_apps_bt="BT / Azureus"
rst_link_down="Link Down"
rst_full="Full"
rst_half="Half"
rst_days="Days"
rst_seconds="Seconds"
rst_hour="Hours"
rst_minutes=" minutes."
rst_dialing_up="Dialing Up"
rst_hanging_up="Hanging Up"
rst_status_unknown="Status Unknown!"
upgrade_warning_msg1="You are trying to upload "
upgrade_warning_msg1_1="which is different from the "
upgrade_warning_msg1_2=" you had."
upgrade_warning_msg1_3=""
upgrade_warning_msg2="You are trying to upload "
upgrade_warning_msg2_1="! After installing this Firmware the Router GUI will be in English!"
upgrade_warning_msg3="<br>Please note that the usage of this Firmware may cause technical limitation like e.g. a reduction of available Wireless-Channel!"
upgrade_warning_msg4="<br>Do you still want to continue?"
upgrade_warning_msg5="The firmware you are trying to upload is the same as the one you have."
upgrade_warning_msg6="The firmware version you are trying to upload is older than the one you have."
upgrade_world_wide="world wide"
upgrade_with_en="with English"
upgrade_with_jp="with Japanese language"
upgrade_with_gr="with German language"
upgrade_with_pr="with simplified Chinese language"
upgrade_with_ko="with Korean language"
upgrade_world_wide_firmware="a world wide firmware"
upgrade_gr_firmware="a GR firmware with German language"
upgrade_jp_firmware="a JP firmware with Japanese language"
upgrade_pr_firmware="a PR firmware with simplified Chinese language"
upgrade_ko_firmware="a KO firmware with Korean language"
upgrade_non_world_firmware="a non world wide firmware"
upgrade_na_firmware="a NA firmware with English GUI"
upgrade_world_firmware="a world wide firmware with English GUI"
upgrade_non_jp_firmware="a non JP firmware"
upgrade_non_gr_firmware="a non GR firmware"
upgrade_non_pr_firmware="a non PR firmware"
upgrade_non_ko_firmware="a non KO firmware"
upgrade_non_twc_firmware="a non TWC firmware"
wizard_pptp_type="PPTP detected"
wizard_bpa_type="Telstra BigPond detected"
wizard_pppoe_type="PPPoE detected"
disconnected="Disconnected"
connected="Connected"
excellent="excellent"
good="good"
fair="fair"
poor="poor"
msg_wps_start_pbc="Please click the software or hardware button on the client to start the WPS process..."
msg_wps_start_pin="Please click the software button on the client to start the WPS process..."
temporarily="(Temporarily)"
max_rule_num="The router can support only 20 service rules." 
det_duplicate_service="Duplicate service detected!"
exist_block_service="The blocked service already exists!"
route_title="router form"
basic_idle="<b>Idle Timeout</b>(In Minutes)"
m_proper_time="Invalid idle time,please enter proper numeral."
dhcp_acname="<b>Account Name</b> &nbsp;(If Required)"
dhcp_doname="<b>Domain Name</b> &nbsp;(If Required)"
c_ilname="The Account Name or Domain Name contains illegal characters. This may cause the system to behave unexpectedly. Do you want to continue?"
pppoe_serv_name="<b>Service Name</b> (If Required)"
domain_blank="Domain can not be empty."
ju_conditin="Junction condition"
port_range="Invalid port range, please enter again."
wansetup_disable_ipv6="Disable IPv6 pass-through"
a_notallowkey="Invalid keyword"
a_notssid="Character is not allowed in SSID."
auto_update_info="The router is checking the NETGEAR server to see if updated firmware available for your router. <br> <br> This could take up to "
auto_update_info_1=" seconds, please wait ..."
auto_check_update="Check for Updated Firmware Upon Log-in "
fw_wait="Checking for New Version. Please wait"
gmt_12="(GMT-12:00) Eniwetok,Kwajalein"
gmt_6="(GMT-06:00) Central America, Central Time (US & Canada)"
gmt_5="(GMT-05:00) Bogota, Lima, Quito, Eastern Time (US & Canada)"
gmt_4="(GMT-04:00) Atlantic Time (Canada), Caracas, La Paz, Santiago"
gmt_3="(GMT-03:00) Brasilia, Buenos Aires, Georgetown, Greenland"
gmt1_1="(GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London"
gmt0_1="(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna"
gmt0_2="(GMT+02:00) Athens, Beirut, Istanbul, Minsk"
gmt0_3="(GMT+03:00) Baghdad, Kuwait, Nairobi, Riyadh"
gmt0_4="(GMT+04:00) Abu Dhabi, Muscat, Baku, Tbilisi, Yerevan, Kabul"
gmt0_5="(GMT+05:00) Ekaterinburg, Islamabad, Karachi, Tashkent"
gmt0_6="(GMT+06:00) Almaty, Novosibirsk, Astana, Dhaka, Sri Jayawardenepura, Rangoon"
gmt0_7="(GMT+07:00) Bangkok, Jakarta, Hanoi, Krasnoyarsk"
gmt0_8="(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi"
gmt0_9="(GMT+09:00) Tokyo, Osaka, Sapporo, Seoul, Yakutsk, Adelaide, Darwin"
gmt0_12="(GMT+12:00) Fiji, Kamchatka, Auckland, Wellington, Marshall Is."
a_errsmtp="Error: Invalid SMTP server address."
a_slessport="The starting port address must be less than 65535."
a_elessport="The ending port address must be less than 65535."
a_sbigport="The starting port address must be bigger than 1."
a_ebigport="The ending port address must be bigger than 1."
a_nolog="There is no log message to send."
a_inbsport="Inbound connection start port"
a_inbeport="Inbound connection end port"
a_insip="Invalid Start IP."
a_ineip="Invalid End IP."
a_sipthaneip="Start IP must be less than End IP."
index_head="Checking JavaScript Support"
index_p1="To provide an enhanced user interface, this Router uses JavaScript extensively."
index_p2="If this page is not quickly replaced, your Browser does NOT support JavaScript."
index_p3="Please enable JavaScript in your Browser, or use a different Browser."
a_changeip="Please change your computer's IP address manually if LAN IP subnet will be changed."
c_overwrite="The input data is duplicated with current record,\ncontinue to overwrite?"
setup="Setup"
usb_header="USB Storage"
usb_settings="USB Settings"
qos_check_h="Uplink band width check Assistant"
qos_dect="Attempting to detect uplink bandwidth . Please Wait"
a_uplink="Invalid Uplink Bandwidth"
a_nogateway="Gateway does not response the PING or traceroute!"
a_destip="Invalid Destination IP Address, please enter again."
current_ver="Current Firmware Version"
upg_info="It will take "
upg_info_1=" minutes to complete the update. Please do not press the reset button or unplug your extender."
a_upmsg="During the update process your network connection will be disconnected. Do you want to continue?"
a_0to1440="Invalid Advertisement Period value. The value must be in the range 1-1440."
a_0to255="Invalid Advertisement Time to Live value. The value must be in the range 1-255."
ver_wait="Checking for a new update. This may take a minute..."
new_ver="New Version"
ver_auto_dect="The router can Auto Detect New Version of Firmware on the Internet."
ver_check="Do You Want to Start the Detection Now?"
upload_wait="Upgrading Router Firmware now. Please Wait"
a_mtu="Invalid MTU value, valid range is 616 to"
a_maxitem="Max number of access list item reached."
a_selwl="Please select a Wireless PC from the list or manually enter the Wireless PC Card Information."
a_selwlcard="Please enter a name for selected Wireless PC Card."
gui_lang_check="Check if there is a newer version for the selected GUI language on NETGEAR server."
gui_lang_conn="Attempting to connect to Netgear Server. Please Wait..."
gui_lang_had_new="There is a new GUI text file available:"
gui_lang_down_question="Do you want to download and use this new GUI text file?"
gui_lang_no_new="No New Language Table Version Available."
gui_lang_switch="Do you want to switch from"
gui_lang_brs=" (the current language) to"
gui_lang_conflict_help="<title>Help</title><link rel=stylesheet href=help.css></head><body style="margin:0px"><div id="content" style="overflow:auto;scrolling:auto;width:100%;height:140px"><h1>Check Language Help</h1><p>The GUI language is different from the browser language, if you want to switch the GUI language to the browser language, please click the <b>Yes</b> button, else click the <b>No</b> button</p></div></body>"
gui_lang_no_conn_retry="The router has no Internet connection, it can't download the specified language file from NETGEAR web site. If you haven't set up the router's Internet port, please run the Installation CD, otherwise, please manually connect the router to Internet and try this function again."
a_wpa2psk="The wireless security options WPA-PSK (TKIP), WPA2-PSK (AES), and WPA-PSK (TKIP) + WPA2-PSK (AES) are not available if you enable the wireless repeating function. \nPlease change your security option before you enable the wireless repeating function."
a_setip="To operate as Repeater, please setup a new IP address of this device, then you can configure this device via this new IP address in the future."
auto_mark="Auto"
wpapsk="WPA-PSK [TKIP]" 
c_warning="WARNING: Selecting the incorrect region may result in a violation of applicable law. \nDo you agree to act in accordance with these settings?"
m_key64="Invalid Key.\n\nKeys length should be 10 Hex (0~9 and A~F) chars or 5 ASCII chars."
m_key128="Invalid Key.\n\nKeys length should be 26 Hex (0~9 and A~F) chars or 13 ASCII chars."
a_notallowpassp="Character is not allowed in passphrase."
wps_method="Select a setup method"
wps_secrisk="Security Risk: detecting more than one client with push button pressed."
wps_pin_p="This is the security PIN of the WPS client. While connecting, WPS-enabled adapters provide a randomly-generated security PIN."
traffic_count="Your Traffic Meter counter is "
reach_limit="before the monthly limit is reached."
meter_limit="The Traffic Meter monthly limit ("
reach="has been reached."
invalid_month="Invalid numeric value for Monthly Limit.\n"
round_month="Round-up value should be less than Monthly Limit.\n"
invalid_watermark="Invalid numeric value for Watermark at traffic control.\n"
watermark_month="Watermark value should be less than Monthly Limit.\n"
invalid_hour="Hour value in traffic counter reset time is invalid.\n"
invalid_minute="Minute value in traffic counter reset time is invalid.\n"
am_mark="am"
last_mark="Last"
msg_space="Blanks or spaces are not allowed in"
msg_blank_in="Blanks are not allowed in"
msg_invalid="Invalid character or characters in"
msg_invalid1="Valid characters are"
msg_check_invalid="contains an invalid number."
msg_greater="must be greater than"
msg_less="must be less than"
cur_gui_version="Current GUI Language Version"
new_gui_version="New GUI Language Version"
in_auth_server_ip="Invalid Authentication Server IP Address."
in_auth_server_port="Invalid Authentication Server Port Number."
wps_msg="WPA/WPA2 Enterprise cannot work with WPS. WPS is going to become inaccessible. Do you want to continue?"
share_secret="RADIUS server Shared Secret:"
guest_duplicate_ssid="SSID is duplicated with other guest network's SSID"
guest_profile="Guest Profile"
guest_lan_access="My LAN access"
open_dns_msg1="To configure the DNS Setting will disable OpenDNS Parental Control. Do you want to continue?"

/////////////////////////////////////////////New Added  Strings////////////////////////////////////////////////////////
gmt0_55="(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi"
pm_mark="pm"
release_notes="Release Notes"

//05132009
qos_check_auto="Automatically check Internet Uplink bandwidth"

//05192009
gmt0_13="(GMT+13:00) Nukualofa"

//090618 ddns
status1="updated successfully at"
status3="Authentication failed. User name or password is not correct."
status4="Update failed. Host name is not correct."
status5_1="Update failed at"
status5_2="The service provider is not reachable."

//090619
routes_name_dup="Duplicate route name."
routes_metric_error="Invalid metric number."
routes_condition_dup="Duplicate route condition."

//090914
guest_enable_isolation="Enable Wireless Isolation"
qos_rule_duplicate_for="QoS Policy for"
already_exist="already exist"
wlmode_utm72="Up to 72Mbps"
wlmode_utm150="Up to 150Mbps"
wlan_mode_72="Up to 72 Mbps"
wlan_mode_150="Up to 150 Mbps"
router_status_intra_port="Intranet Port"
connection_mark="Connection"
wl_isolation="Wireless isolation"
wlan_mode_75="Up to 75 Mbps"
wlmode_utm75="Up to 75Mbps"

//090925 usb
share_name="Share Name"
net_dev_name="Network/Device Name"
avail_net_folder="Available Network Folders"
folder_name="Folder Name"
vol_name="Volume Name"
safe_remove="Remove USB Device"
usb_stor="USB Storage (Basic Settings)"
usb_storage="USB Storage (Advanced Settings)"
choose_folder="Please choose a Folder."
work_group="Workgroup"
access_method="Access Method"
link="Link"
network_conn="Network Neighborhood/MacShare"
http="HTTP"
create_folder="Create Network Folder"
usb_dev="USB Device"
folder="Folder"
read_access="Read Access"
no_psswd="All - no password"
edit_folder="Edit Network Folder"
file_sys="File System"
browse_folder="Browse for Folder"
usb_apro_dev="USB Drive Approved Devices"
via_internet="via internet"
usb_httpvia_port="http via port should be 80 or in the range [1024 ~ 65535] ."
usb_ftpvia_port="ftp via port should be 21 or in the range [1024 ~ 65535] ."
folder_notExist="This folder not exist,please input correct folder path."
folder_NULL="Folder can not be NULL!"
shareName_NULL="Share Name can not be NULL!"
browse_mark="Browse"
unmount_all="Do you want to unmount all devices?"
aprov_usb="Approved USB Devices"
allow_apro_dev="Allow only approved devices"
capcity="Capacity"
avilable_usb="Available USB Devices"
invalid_workgroup_name="Invalid Workgroup Name"
now_remove="Now you can remove this device."
read_access="Read Access"
write_access="Write Access"
total_space="Total Space"
free_space="Free Space"
enable_usb="Enable any USB Device connected to the USB port"
admin="admin"
invalid_shareName="Share Name can not contain  \" : < > ' |\/ ] "
approved_devices="Approved Devices"
no_usbdish="No Disk"
adv_settings="Advanced Settings"
usb_dev_busy="The device cannot be stopped right now. Try stopping the device again later."
no_psswd_br="All<BR>- no password"
read_access_br="Read<BR>Access"
write_access_br="Write<BR>Access"
total_space_br="Total<BR>Space"
free_space_br="Free<BR>Space"
confiltport_http_ftp="HTTP port (via Internet) should not be the same as FTP port (via Internet)."
alert_wpapsk="IMPORTANT\nWPA-PSK [TKIP] ONLY operates at \"Up to 54Mbps\" (legacy G) mode, not N mode.\nNETGEAR recommends that you use WPA2-PSK [AES] to get full N rate support."
alert_autopsk="IMPORTANT\nWPA-PSK [TKIP] may only operate at \"Up to 54Mbps\" (legacy G) rate, not N rate.\nNETGEAR recommends that you use WPA2-PSK [AES] to get full N rate support."


//091016
1st="1st"
2nd="2nd"
3th="3rd"
4th="4th"
5th="5th"
6th="6th"
7th="7th"
8th="8th"
9th="9th"
10th="10th"
11th="11th"
12th="12th"
13th="13th"
14th="14th"
15th="15th"
16th="16th"
17th="17th"
18th="18th"
19th="19th"
20th="20th"
21th="21th"
22th="22th"
23th="23th"
24th="24th"
25th="25th"
26th="26th"
27th="27th"
28th="28th"
//091218
upgrade_warning_msg="You are trying to download the firmware which the region is different from the current firmware you had."
//100122
wps_in_process="WPS process is in progress, please apply the changes later."
sel_usb_mount="Please select USB device to remove"

wired_dev="Wired Devices"
wireless_dev="Wireless Devices (Wireless intruders also show up here)"
//100121
basic_intserv_l2tp="L2TP"

//100129
adva_wansetup_igmp="Disable IGMP Proxying"

//100309
default_gateway="Gateway IP Address"

dup_sharename="This Share name has already existed, please change to another one."

//100608
coun_na="North America"
log_cat_include="Include in Log"
log_cat_allow="Attempted access to allowed sites"
log_cat_block="Attempted access to blocked sites and services"
log_cat_login="Connections to the Web-based interface of this Router"
log_cat_info="Router operation (startup, get time etc)"
log_cat_fw="Known DoS attacks and Port Scans"
log_cat_pfpt="Port Forwarding / Port Triggering"
log_cat_wl="Wireless access"

//100628
//ipv6 common
ipv6="IPv6"
internet_type="Internet Connection Type"
auto_detect="Auto Detect"
6to4="6to4 Tunnel"
pass_through="Pass Through"
fixed_mark="Fixed"
//IPV6_fixed.htm IPV6_auto.htm IPV6_pppoe.htm IPV6_dhcp.htm
ipv6_wan="Router's IPv6 Address On WAN"
//IPV6_fixed.htm IPV6_auto.htm IPV6_pppoe.htm IPV6_dhcp.htm IPV6_tunnel.htm 
ipv6_lan="Router's IPv6 Address On LAN"
//IPV6_auto.htm IPV6_pppoe.htm IPV6_dhcp.htm IPV6_tunnel.htm
ip_assign="IP Address Assignment"
use_dhcp="Use DHCP Server"
auto_config="Auto Config"
use_interface_id="Use This Interface ID"
status_refresh="Status Refresh"
//IPV6_fixed.htm
ipv6_prefix_length="IPv6 Address/Prefix Length"
ipv6_gateway="Default IPv6 Gateway"
enable_dhcp="Enable DHCP Server"
//IPV6_tunnel.htm
remote_router="Remote 6to4 Relay Router"
static_ip="Static IP Address"
//IPV6_dhcp.htm
ipv6_dhcp_class="User Class (if Required)"
//cgi string
not_avaliable="Not Available"

//IPV6_auto.htm IPV6_pppoe.htm IPV6_dhcp.htm IPV6_tunnel.htm
invalid_id="Interface ID is not valid, only hex digits are allowed."
//IPV6_fixed.htm
input_ipv6_wan="IPv6 Address and Prefix Length are required for the WAN Setup."
invalid_ipv6_wan="IPv6 Address for the WAN Setup is not valid, only hexdigits are allowed."
invalid_profix_wan_len="Prefix Length for the WAN Setup is not valid; it has to be a number between 4 ~ 126"
input_ipv6_gw="Gateway IPv6 Address is required for the WAN Setup."
invalid_ipv6_gw="Gateway IPv6 Address is not valid, only hexdigits are allowed."
input_ipv6_lan="IPv6 Address and Prefix Length are required for the LAN Setup."
invalid_ipv6_lan="IPv6 Address for the LAN Setup is not valid, only hexdigits are allowed."
invalid_profix_lan_len="Prefix Length for the LAN Setup is not valid; it has to be a number between 4 ~ 126"
input_pri_dns="Primary DNS Server setting is required for the LAN Setup."
invalid_pri_dns="Primary DNS Server setting is the IPv6 address of the primary DNS server; only hex digits are required."
invalid_sec_dns="Secondary DNS Server setting is the IPv6 address of the secondary DNS server; only hex digits are required."
//IPV6_dhcp.htm
username_not_allowed="User Class is not valid; only printable ASCII characters are allowed."
//IPV6_tunnel.htm
confirm_ipv6="6to4 Tunnel requires the IPv4 PPPoE/PPTP connection mode to be \"Always On\", other connection modes (\"Dial on Demand\" and \"Manually Connect\") will become unavailable. Please confirm the change."
//help file

//repeater
ca_next_mark="I have connected to the Extender network"
back_mark=" <Back "
finish=" Finish "
keep_ssid_warning="To ensure the delivery of optimal wireless performance to your devices, NETGEAR recommends that you keep a unique SSID for the Extender network and you only connect to the Extender network when the existing network does not deliver good enough coverage."
ca_15_logging_1="Follow the instructions below to connect you devices to the extended network."
ca_15_logging_2="Your extender network has been created:"
ca_15_logging_3="Connect your devices like a laptop, tablet, smart TV, etc. to your extended network. For example, on your laptop you may use the Windows WiFi manager to connect to the newly extended network."
ca_checkbox="Click the Continue button after you connect your WiFi device."
ca_15_ssid="Name (SSID)"
ca_15_sec="Security"
ca_wlan_network_mark="My EX3700 Wireless Network"
ca_15a_passphrase="Network security key"
ca_15_repeater="Extender network"
ca1_15_checkbox="My computer is connected to the Extender network. (Selecting this checkbox activates the Continue button.)"
ca_ap_use_same_sec="Use the existing securiy mode and password settings."
ca_ap_ssid="SSID"
ca_ap_mac="Mac Address"
ca_ap_channel="Channel"
ca_ap_signal="Signal"
ca_ap_security="Security"
ca_manual_wl_ssid="Manually input my wireless SSID"
ca_ap_head="Enter the security settings of the selected WiFi network"
ca_retry_head="The Extender was not able to connect to your existing network."
ca_retry_message="Please re-enter the passphrase and try again.<br><br>If you entered the correct passphrase, and the Extender did not connect to your existing wireless<br>network, you might need to move the Extender closer to your router or to a position with a better line of<br>sight. Check the Extender LEDs to isolate the problem. The LEDs are explained in the installation guide and<br>user manual for your product.<br><br>Click Cancel to select a different network.<br>  "
wait_for_connect="Setting up connection between the extender and your existing router. Please wait…"
wait_for_connect2="Applying your settings. This may take up to one minute."
wait_for_connect3="The Extender is updating the settings.<br> This takes approximately 2 minutes."
wait_for_summary_show="NETGEAR Genie is finalizing the settings.<br>This takes approximately 2 minutes."
ca_ip_changed="Your Extender's IP address has been changed to:"
ca_con_success_head="Your extender has successfully connected to your existing WiFi network."
ca_apsetting_head="Enter name and security settings for your extended WiFi network."
ca_con_success="The link rate LED is green, indicating that the Extender is connecting to the existing network at best speed."
ca_con_amber="The link rate LED is amber, indicating that the Extender is connected to the existing network at good speed."
ca_select_language="Select your preferred language."
select_network="1-Select Network"
apply_sec="2-Apply Security"
connect_network="3-Configure Extender"
config_repeater="4-Finalize Settings"
review_setting="5-Review Settings"
ca_connect_uncomplete_1="The Link Rate LED is red. That means the Extender does not have a good connection to your existing wireless network.  "
ca_connect_uncomplete_2="<b> NETGEAR recommends that you move the Extender closer to your router or to a location with a better line of sight, then click Try again.</b><br><br> "
ca_connect_uncomplete_3="If you want to select a different network, click Cancel.<br><br> "
ca_connect_uncomplete_4="To complete the setup as is, click Finish.<br> "
ca_connect_uncomplete_5=" "
ca_connect_uncomplete_head="Move Extender closer to your existing router or gateway."
ca_connect_uncomplete_wpa="The selected network is no longer available.  Please make sure the existing network equipment is within the proximity of the Extender."
ca_continue="You are not able to connect to internet. Click "Continue" to run through setup or "Exit" to manually configure the connection."
exit_mark="Exit"
bps_mark="Mbps"
continue_mark=" Continue"
tryagain_mark=" Try again "
device_ip="Device's IP Address"
get_dyn_ip="Get Dynamically IP Address From Router"
connect_exi_network="Connect to Existing Network"
ip_setup="IP Address Setup"
network_dev="Attached Devices"
fw_upgrade="Firmware Update"
conn_status="Connection Status to Existing Network"
ext_ip="Extender IP Info"
dhcp_client="DHCP Client"
ext_wireless="Extender Wireless Setting"
wps_setup="Wi-Fi Protected Setup"
wait_for_searching="Smart setup is searching for existing WiFi networks. This may take up to one minute."
detect_wireless_network="Detecting the wireless networks in your neighborhood.<br>This takes approximately 1 minute."
ca_wireless_ap="Select the name of your existing network."
extender_info="Please use your wireless profile manager software (Windows, NETGEAR Adapter Wizard, etc) re-connect to the Extender network using the information displayed below. "
ca_15_ssid="Wireless network name (SSID) "
ca_close_window="Do you want to close this window? "
ca_finish="You may close the browser window now. "
ca_add_bookmark="Do you want to add \"EX3700 Configuration\" as a bookmark?"
wlan_network_mark="My EX3700 Wireless Network "
wlan_adv_routerpin="Device's PIN"
wlan_adv_endis_pin="Disable Device's PIN"
adva_wlan_router="Enable Wireless Access Point"
logout_info="Thank you for using the NETGEAR Web-based Configuration Utility. "
auto_upg_nowan="We cannot check if there is a new firmware because your extender is not connected to the Internet. Connect you extender to the Internet and try again."
downloading_ver= "The device is Downloading the New Version Now. Please Wait."
add_wps_client_p="You can securely connect WiFi client devices to the extender using the WPS feature."
add_wps_client_text1="To use WPS, the WiFi device you are trying to connect must support WPS and be compatible with WPA security. Some NETGEAR products use the name Push 'n' Connect for WPS."
add_wps_client_text3="Wi-Fi Protected Setup (WPS) is a network security standard that allow users to easily secure a wireless home network. WPS can automatically set up a network name (SSID) and strong wireless security for electronic devices."
wps_push_button_text="You can either press the Push Button physically on the Wireless Extender or press the Button below (soft Push Button)."
upgrade_turnoff_auto="The firmware upgrade can contain valuable enhancements.\n Are you sure you want to turn off automatic checking?\n After you turn it off, you can re-enable it through the wireless Extender Upgrade page"
wep_128="The 128bit selection only allows 26 hexadecimals value!"
wep_64="The 64bit selection only allows 10 hexadecimals value!"
rts_null="CTS/RTS Threshold value is NULL."
fragmentation_null="Fragmentation Length value is NULL."
ca_change="The Extender network name (SSID) has been changed to "
ca_follow=". \n\nFollow the instruction to complete the setup."
ip_enable="Enable internal DHCP Server"
ip_disable="Disable internal DHCP Server"
ip_start="Starting IP Address"
ip_end="Ending IP Address"
unknow_mark="&lt;unknown&gt;"
cp_passwd="copy password " 
ca_click=" "
ca_mac="The Extender MAC addresses are "
ca_info="If you have Access Control List (ACL) enabled in your router. Please make sure you have added this device MAC address into your router's Access Control List (ACL)."
disable_dhcp_server="Disable Internal DHCP Server"
ver_check_ftp_svr="Setting the upgrade URL:"
//added by dennis 12/28/2010 start
home_basic = "Home"
int_basic = "Internet"
wls_basic = "Wireless"
par_basic = "Parental Controls"
rea_basic = "ReadySHARE"
home_adv  = "ADVANCED Home"
wps_adv   = "Connect Devices (WPS)"
bas_adv   = "Basic Settings"
admin_adv = "Administration"
rep_adv   = "Wireless Repeating"
status_basic = "STATUS"
good_basic = "GOOD"
not_connect_basic = "Not Connected"
off_basic = "OFF"
no_security = "No Security"
ssid_basic = "Name(SSID)"
key_pass_basic = "Key/Password"
none_basic = "None"
num_of_devices_basic = "Number of Devices"
not_support_basic = "NOT SUPPORTED"
enabled_basic = "ENABLED"
not_enabled_basic = "NOT ENABLED"
ready_basic = "READY"
no_usb_basic = "No USB drive"
new_firmware_avail_basic = "New update is available. Click <a class='fwCheck'>here</a> to start."
click_here_basic = "Click here"
to_get_basic = " to get it."
help_basic_foot ="Help & Support"
support_basic_foot = "Support@NETGEAR.com"
faq_basic_foot = "Extender FAQ"
search_basic_foot = "SEARCH HELP"
license_foot="GNU GPL"
go_basic_foot = "GO"
tab_basic = "BASIC"
tab_adv = "ADVANCED"
multi_login_info="You are currently logged in from another device. There can be only one device logged in at a time. If you log in from the device, the other device will be logged out. Do you want to proceed?"
// 110127 password recovery
forget_admin_password="Forgotten Admin Password"
default_password="Admin password is "password" by default."
help_passwd_recovery="If you changed the default password but did not enable password recovery, then the only way to recover the password is to reset the device to factory default. Use a pin to press and hold the reset button for 5~8 seconds to do so."
forget_admin_password2="Forgotten admin password?"
help_center="Help Center"
show_hide_help="Show/Hide Help Center"
comfirm_reboot="Rebooting the router will disrupt active traffic on the network. Are you sure?"
rebootingg_new="Your extender is restarting, please wait ..."
reboot_mark="Reboot"
// 101224 Advanced home and password recovery
router_info="Router Information"
internet_provider_wan_setup="Internet Provider (WAN) Setup"
access_resource_denied="Access to this resource is denied, your client has not supplied the correct authentication."
router_password_recovered="Extender Password Recovered"
recovered_admin_passwd="You have successfully recovered the admin password."
router_admin_user="Extender Admin Username"
router_admin_passwd="Extender Admin Password"
can_login="You can now log in to the extender using username "admin" and this recovered password."
ques1_0="Select a question"
ques1_1="What's the name of the first NETGEAR product you purchased?"
ques1_2="What was the name of the first school you attended?"
ques1_3="What is your oldest sister's first name?"
ques1_4="What is your oldest brother's first name?"
ques1_5="In what city were you born?"
ques1_6="What is your grandmother's first name?"
ques1_7="What is your grandfather's first name?"
ques1_8="In what year (YYYY) did you graduate from high school?"
ques1_9="What is the name of your first employer?"
ques2_0="Select a question"
ques2_1="What is your youngest sister's first name?"
ques2_2="What is your youngest brother's first name?"
ques2_3="What is your father's middle name?"
ques2_4="What is your mother's middle name?"
ques2_5="What was the first name of your first manager?"
ques2_6="In what city was your mother born?"
ques2_7="In what city was your father born?"
ques2_8="What is your best friend's first name?"
router_password_recovery="Extender Password Recovery"
complet_secure_questtion="Please complete the answers to the two security questions below and click <b>Continue</b>."
secure_ques1="Security Question #1*: "
secure_answer="Answer*: "
secure_ques2="Security Question #2*: "
require_info="* = required information"
check_answer_info="The information you entered does not match what is saved on the extender. Please enter it again."
can_help_recover="We can help you to recover the extender's admin password. Please complete the information below and click <b>Continue</b>."
enter_serial="Enter the extender's Serial Number: "
find_on_label="(You can find it on the extender product label.)"
alert_enable_passwd_revery="If you do not enable password recovery and forget your new password, the only way to recover the password is to reset the device to factory default.\nAre you sure you want to change the admin password without recovery option?"
enter_ans_each_question="Please enter your answer for each question."
select_a_question="Please select a question."
enable_password_recovery="Enable Password Recovery"
lastime_password_recovered="Last time password was recovered: "
// 101227 apply and cancel mark
apply_change_mark="Apply"
cancel_change_mark="Cancel"
continue_change_mark="Continue"
login_change_mark="Login"
upgrade_head_newgui="Device Update"
// 2011/07/11 jenny add for dual band
select_mode_head="Select the name of your existing wireless network you wish to extend."
support_basic="Online Support"
// 2011/07/26 tracy add for dual band
//conn_status_2g="Connection Status to Existing Network(2.4GHz)"
//conn_status_5g="Connection Status to Existing Network(5GHz)"
ext_ip_2g="Extender IP Info(2.4GHz)"
ext_ip_5g="Extender IP Info(5GHz)"
//ext_wireless_2g="Extender Wireless Setting(2.4GHz)"
//ext_wireless_5g="Extender Wireless Setting(5GHz)"
//2011/07/28 
guest_enable_broad_24g="Enable 2.4GHz SSID Broadcast"
guest_enable_broad_5g="Enable 5GHz SSID Broadcast"
info_mark_2g_ssid="2.4GHz Network Name (SSID):"
info_mark_5g_ssid="5GHz Network Name (SSID):"
lan_2g_setting_mark="LAN IP Address Setting(2.4GHz)"
lan_5g_setting_mark="LAN IP Address Setting(5GHz)"
//wlan_adv_keep_24g="Keep Existing 2.4GHz Wireless Settings"
//wlan_adv_keep_5g="Keep Existing 5GHz Wireless Settings"
adva_wlan_router_24g="Enable 2.4GHz Wireless Access Point"
adva_wlan_router_5g="Enable 5GHz Wireless Access Point"
ca_change_24g="The Extender 2.4GHz network name (SSID) has been changed to "
ca_change_5g="The Extender 5GHz network name (SSID) has been changed to "
ca_change_5g_2=", and 5GHz network name (SSID) has been changed to "
int_surfing="Internet Surfing - Connect devices on both 2.4 and 5GHz bands at the same time."
performance="FastLane Technology – Offers maximum performance but limits connection to one band (2.4 or 5GHz) . "
performance_choose="Connect high performance wireless devices to the following band:"
alert_5g="(Under this mode, the Extender can not connect to the router in 5GHz band.)"
sel_24g="Select your 2.4GHz WiFi network to connect the Extender to your router:"
sel_5g="Select your 5GHz WiFi network to connect the Extender to your router:"
eth_bind_band="Ethernet ports to WiFi use the following band:"
network_24g="Your existing network in 2.4GHz:"
network_5g="Your existing network in 5GHz:"
ca_15_repeater_24g = "2.4GHz Extender Network:"
ca_15_repeater_5g = "5GHz Extender Network:"
profile_mang="Please use your wireless profile manager software(Windows,NETGEAR Adapter Wizard,etc) re-connect to the Extender network using the information displayed below."

//2011/08/11
bh_yes_mark = "Yes";
bh_multi_login_info = "You are currently logged in from another device. There can be only one device logged in at a time. If you log in from this device, the other device will be logged out. Do you want to proceed?";
bh_no_mark = "No";
24g_flag="2.4GHz"
5g_flag="5GHz"
ca_retry_message1="Please re-enter the passphrase and try again."
ca_retry_message2="If you entered the correct passphrase, and the Extender did not connect to your existing wireless network, you might need to move the Extender closer to your router or to a position with a better line of sight. Check the Extender LEDs to isolate the problem. The LEDs are explained in the installation guide and user manual for your product."
ca_retry_message3="Click Cancel to select a different network."
24g_mark="2.4G"
5g_mark="5G"
ap_mode_mark="Wireless Mode"
passphrase_notice="A passphrase consists of either 8~63 ASCII characters or exactly 64 hex-digits. A hex digit is one of these characters: 0, 1, 2, ..., 8, 9, A, B, C, D, E, F."
upg_error_notice="This firmware file is incorrect! Please get the firmware file again and make sure it is the correct firmware for this product."
search_mark="Enter Search Item"
select_country="Please select your Country or Region"
ca_configure="Configuring the Extender"
ca_notice1="You are not able to connect to the Internet."
ca_notice2="Do you want NETGEAR Genie to help?"
ca_select_no="No, I'll connect manually"
select_band_head="Select the WiFi band you would like to connect your devices to:"
performance_head="FastLane technology offers maximum performance for streaming video and gaming using the 2.4 or 5GHz band. To configure FastLane  technology, select the band you would like to use:"

//20111115 Add skip button on check passphrase fail page
skip_mark="Skip"
operate_mode_head="Operating Mode"
ext_operate_mode="Extender Operating mode"
desc_int_surfing="Extends both WiFi bands at the same time (2.4 and 5 GHz), but reduces the WiFi performance."
performance_24g="Device-to-extender in 5GHz only and extender-to-router in 2.4GHz only"
performance_5g="Device-to-extender in 2.4GHz only and extender-to-router in 5GHz only (Router must support 5GHz band)"

select="Select"
security_null="Please select the security mode of the WiFi network."
ssid_same="2.4G and 5G have the same SSID"

noshare_mark="Not Shared"
yes_mark2="Yes."
info_mark_ver2="Firmware Version"
back_slash="\"
year="year"
day="day"

//20120215 Netgear update GUI
menu1="Step 1 : Select the WiFi Network"
menu2="Step 2 : Set Up the Extender"
menu3="Step 3 : Apply Settings"
ca_notice1_1="Your WiFi extender is not connected to the router. Do you want NETGEAR Genie to help?"
ca_ap_manual_head="Enter your existing router's WiFi network settings"
ca_wireless_ap_24g="Select the 2.4GHz WiFi network you would like to extend."
ca_wireless_ap_5g="Select the 5GHz WiFi network you would like to extend."
sel_5g_des_1="Your extender supports dual band WiFi."
sel_5g_des_2="If your router does not support 5GHz band, click the Skip button."
not_support_5g="My router does not support 5GHz band."
confirm_24g="You need to have a 5GHz network setup to be able to skip 2.4GHz setup, otherwise the extender won't be able to connect to your existing network.\nAre you sure you want to continue?"
set_late_5g="Set it up later"

//20120820 WPS PIN attack
router_pin_mark1="Enable Device's PIN"
router_pin_mark2="To prevent PIN compromise, auto disable the PIN after"
router_pin_mark3="failed PIN connections, until device reboots."
router_pin_mark4="In auto disabled mode, device's WPS LED will keep blinking slowly"

//2.4g coexistence
coex_enable="Enable 20/40 MHz Coexistence"
// TiVo Support
tivo_mark="Enable TiVo<sup>&reg;</sup> support"

//100623
auto_conn_24hr="Enable automatic internet connection reset at"

internet_head_newgui="Internet Setup"

enable_nat="Enable NAT (for more secure connections to the Internet)"

//profile
profile_list="Profile List"
profile_name="Profile Name"
profile_ssid="WiFi Network Name (2.4GHz)"
profile_ssid_5g="WiFi Network Name (5GHz)"
profile_cli_ssid="Internet Network Name (2.4GHz)"
profile_cli_ssid_5g="Internet Network Name (5GHz)"
profile_ap_ssid="Extender Network Name (2.4GHz)"
profile_ap_ssid_5g="Extender Network Name (5GHz)"
profile_ip="Device IP"
profile_nat="NAT"
profile_save="Save current settings to this profile"
profile_delete="Delete Profile"
save_mark="Save"
profile_name_null="Profile name can not be empty."
profile_name_error="Invalid profile name."
profile_details="Details"
profile_details_head="Profile Details"
profile_select="Please select a profile first."

mode_repeater="WiFi Range Extender"
mode_wifiwan="WiFi Range Extender"
mode_ap="WiFi Access Point"
mode_router="WiFi Access Point"

//user select network type
private_network="Private Network"
public_network="Public Network (selecting this will enable NAT/firewall)"
ca_wifi_head="Is this WiFi network ("
ca_wifi_head_rest=") a private home network or a public network (such as in a hotel or coffee shop)?"
ca_wire_head="Is the wire connecting to a private home network or a public network (such as in a hotel or coffee shop)?"

genie_menu1="Step 1 : Detect the Internet Connection"
genie_menu2="Step 2 : Set Up the Extender"
genie_menu3="Step 3 : Apply Settings"

sel_2g_des_1="Your extender supports dual band WiFi. "
sel_2g_des_2="If you want to connect to 5GHz only, click the Skip button."

link_rate_localization1="Within 2 minuters after the extender connects to the router or gateway and a client, check the Arrow LEDs on the extender to see if they are<br>blinking. A blinking arrow means that you should move the extender to a different location for better WiFi performance.<br>If the extender is in a good location for WiFi performance, the Arrow LEDs do not blink."
link_rate_localization2="Left Arrow LEDs is blinking:"
link_rate_localization3="Move the extender closer to the router or gateway. If that is not possible, try to improve the line of sight between the router and the extender."
link_rate_localization4="Right Arrow LEDs is blinking:"
link_rate_localization5="Move the extender closer to the location of the client(the wireless computer or device that is using the extender WiFi network)."

internet_via_WiFi="The switch on your extender has been set to WiFi Range Extender."
internet_via_Wired="The switch on your extender has been set to Access Point."

static_ip_alert="Be sure the static IP address is in the subnet domain of the connected existing network. Click OK to apply or click Cancel to abort."
wlan_mark_ws_newgui="Wireless Setup"

opmode_1="Internet Surfing Mode"
opmode_2_1="FastLane Mode(device-[2.4G]-extender-[5G]-router)"
opmode_2_2="FastLane Mode(device-[5G]-extender-[2.4G]-router)"

// For Mobile Smart Wizard
mobile_ca_change="The extender wireless network name will be changed to "
mobile_ca_follow1=".\nThe previous network will be disconnected.\n"
mobile_ca_follow2="Go to your mobile device's wireless settings to connect back to the new network.\n"
mobile_ca_follow3="Click OK to proceed."
//Update
wait_for_searching_new="Smart setup is searching for existing WiFi networks. <br>This may take up to a minute."
ca_wireless_ap_24g_new="Select the 2.4GHz WiFi network you would like to extend.<br>Your extender supports dual band WiFi. If you want to connect to 5GHz only, click the Skip button. "
ca_ap_head_new = "Enter the security password for your selected WiFi network."
sec_phr_new = "Password (network key):"
ca_wireless_ap_5g_new="Select the 5GHz WiFi network you would like to extend."
sel_5g_des_1_new="Your extender supports dual band WiFi. "
sel_5g_des_2_new="If your router does not support 5GHz band, click the <b>Skip</b> button."
wait_for_connect_new = "Setting up connection between the extender and your existing router. Please wait..."
ca_apsetting_head_new = "Enter name and security settings for your extended WiFi network."
wait_for_connect2_new="Applying your settings. This may take up to a minute."
ca_15_logging_1_new = "Follow the instructions below to connect you devices to the extended network. "
ca_15_repeater_24g_new = "2.4GHz Extender Network"
ca_15_repeater_5g_new = "5GHz Extender Network"
ca_15_ssid_new = "Name (SSID)"
ca_15_sec_new = "Security"
ca_15_logging_3_new = "Connect your devices like a laptop, tablet, smart TV, etc. to your extended network. For example, on your laptop you may use the Windows WiFi manager to connect to the newly extended network."
ca_checkbox_new = "Once you have connected your devices, mark the checkbox and click the Continue button."
ca_con_success_head_new = "Your extender has successfully connected to your existing WiFi network."
settings="Settings"

//20101129
//Add for Media Server
media_title="Media Server (Settings)"
media_server="Media Server"
enable_media_ser="Enable Media Server"
media_ser_name="Media Server Name"
content_scan="Content Scan"
media_automatic="Automatic (when new files added)"
alert_media_name="You can not input ':' as the readyDLNA media server name."

usb_printer_head="ReadySHARE Printer"
usb_printer="Print Sharing for Windows PCs and Mac Computers with a USB Printer"
usb_printer_step1="Step 1: Connect the USB printer to the router’s USB port with a USB printer cable."
usb_printer_step2="Step 2: Install the USB printer driver software on each computer that will share the printer."
usb_printer_step3="Step 3: On each computer that will share the printer, download the NETGEAR USB Control Center utility from <a href="http://www.netgear.com/readyshare" target="_blank">http://www.netgear.com/readyshare</a>. "
usb_printer_driver="If you do not have the driver, contact the company that made the printer to locate and download the latest printer driver software."
usb_printer_connect="Follow the instructions in the utility to connect to the printer from your computer and print."
usb_printer_item="ReadySHARE Printing"
usb_printer_work="How It Works?"
usb_basic="Basic"

//translated string for new GUI
network_name="Network Name"
network_ssid="Network Name (SSID):"

gmt_35="(GMT-03:30) Newfoundland"
/////////////////////////////////////////////New GUI Strings////////////////////////////////////////////////////////

save_upper="SAVE"
cancel_upper="CANCEL"
back_upper="BACK"
next_upper="NEXT"
ok_lower="ok"

//screen1.html
choose_mode="Choose your operating mode"
welcome_genie="Welcome to NETGEAR genie! How would you like to use your extender?"
ap_mark="Access Point"

//howToUse.html
extend_exist_network="Selecting WiFi Range Extender allows you to extend the range of your existing WiFi network."
wifi_hotspot="Selecting Access Point allows you to create a WiFi hotspot in a location where you have an existing wired connection."

//screen2.html
genie_setup="Welcome to the NETGEAR genie setup"
setup_option="Now let’s get you connected. Choose one of the setup options below."
connect_extender_browser="Connect your extender using a browser based installation guide. Smart Setup allows you to  select a unique network name and password for your extender."
smart_setup="Smart Setup"
connect_extender_wps="Connect to your extender by pressing the WPS SETUP below or the physical button on the extender. To use this feature your existing router has to support WPS."
wps_setup_new="WiFi Protected Setup (WPS)"

//screen3-access.html
look_internet_conn="Looking for an Internet connection."
connect_detect="Connection Detected"
no_connect_detect="No Connection Detected"

//screen4-access.html
decect_conn="Problem detecting connection"
not_find_conn="We could not find an Internet connection."
try_str="Try one of the following and then try again."
restart_router_info="Restart the router by turning it off and  back on again. After restarting wait 2 minutes for the router to start up."
check_info="Make sure that the you are using the right Ethernet port and that the cable is securely plugged into the port on the extender and the router."
operation_tip="Select one of the options below and click Try Again to proceed:"
operation_process="I just restarted the modem and waited for 2 minutes."
problem_info="I corrected a problem with the Ethernet cable."
none_info="None of the above."
try_again_sign="Try Again"

//screen5-access.html
conn_type="Where is the connection"
inquery_network_conn="Is your wired Ethernet connection connected to a private or public network?"
setting_network="Use this setting if your are connected to a wired home network connection."
home_network_mark="Home Network"
firewall_enable="Enables NAT firewall for an additional layer of protection. Use this setting if you are connecting to a wired network in a hotel or a coffee shop."
network_public="Public Network"

//networkTypeNote.html
network_type_note="Malicious botnets are constantly scanning the Internet for devices that can be exploited for spamming or identity theft. Many applications unintentionally leave connections open. If malicious software connects to these applications, they can exploit bugs to gain control of your system and install malware. NAT Firewall blocks these malicious scans and connections."

//screen6-access.html
info_ap="Enter a network name and security settings for your access point network(s)."
band_24g="2.4GHz Network"
band_5g="5GHz Network"

//securitySettingsNote.html
security_setting_note="You can name your extended network the same name as your existing network on this page. However, we recommend that you use a different network name since this allows you to know when you are using your extended network."

//screen7-access.html
apply_settings="We are applying your settings. <br/>This may take a moment."
mark_setting="Settings Applied"

//screen8-access-dual-connected.html
success_create_ap="You have successfully created an access point."
24g_ap_network="2.4GHz Access Point Network"
5g_ap_network="5GHz Access Point Network"

//screen8-access-dual-notConnected.html
info_fail_conn="You have created an access point but we did not detect an Internet connection."
run_setup="Try running setup again."

//screen10-access-connected.html
ap_up_tip="Your access point is up and running."
ap_24g_setting="Access Point Wireless Settings (2.4GHz)"
ap_5g_setting="Access Point Wireless Settings (5GHz)"

//screen10-access-notConnected.html
conn_ap_info="Select smart setup button below to connect your access point."

//screen3-extender.html
select_network_title="Select your network"
select_network_extend="Select an existing network you would like to extend."
deselect_wifi="If you don't want to extend both WiFi bands, deselect the WiFi band by unchecking the box below."
learn_more_mark="Learn More »"
24g_wifi="2.4GHz WiFi Networks"
wpa_wpa2_sec="WPA/WPA2-PSK"
wpa2_psk="WPA2-PSK"
manual_input_ssid="Manually Input Network Name (SSID)"
pwd_char="Enter Password (8-63 characters):"
verify_pwd="Verify Password:"
scan_str="Scanning"
5g_wifi="5GHz WiFi Networks"

//selectNetworkNote.html
recommend_info="We recommend that the existing network you are extending should have at least 60% signal strength for an ideal extended network performance."

//screen4-extender.html
24g_network="2.4GHz Existing Network"

//screen4b-extender.html
enter_pwd="Enter password"
pwd_enter_tip="Enter the password (network key) for your existing WiFi network you selected."
5g_network="5GHz Existing Network"
network_selected="Selected Network:"
protocol_sec="Security Protocol:"
show_pwd="Show password"

//screen5-extender.html
security_setting="Enter security settings"
wifi_enter_tip="Enter a network name and security settings for your extended WiFi network(s)."
24g_extend="2.4GHz Extended Network"
same_exist_pwd="Same as existing network password"
use_differ_pwd="Use a different password"
5g_extend="5GHz Extended Network"

//screen6-extender-dual.html
extender_success_conn="Your extender has successfully connected to your existing WiFi network"
main_network_conn="Connect any WiFi enabled device like you would connect them to your main network, using the credentials below."

//screen7-extender.html
title_register="Register"
info_register_extender="Register your extender to receive notifications about software updates<br />and new product promotions."
skip_reg_mark="Skip Registration »"
first_name_mark="First Name"
last_name_mark="Last Name"
email_lable="Email"
country_lable="Country"
date_purchase="Purchase Date"
serial_num="Serial Number"
info_product="My product is refurbished or does not have a serial number"
genie_mark="Bookmark NETGEAR genie"
info_comm="Send me email communications from NETGEAR"
install_info="Install WiFi Analytics app (Android only)"
country_af="Afghanistan"
country_aland="Åland Islands"
country_alb="Albania"
country_alg="Algeria"
country_am="American Samoa"
country_and="Andorra"
country_ang="Angola"
country_an="Anguilla"
country_ant="Antarctica"
country_anba="Antigua and Barbuda"
country_arg="Argentina"
country_arm="Armenia"
country_aru="Aruba"
country_aus="Austria"
country_az="Azerbaijan"
country_bah="Bahamas"
country_bahr="Bahrain"
country_ban="Bangladesh"
country_bar="Barbados"
country_bela="Belarus"
country_belg="Belgium"
country_beli="Belize"
country_ben="Benin"
country_ber="Bermuda"
country_bhu="Bhutan"
country_bol="Bolivia, Plurinational State of"
country_boss="Bonaire, Sint Eustatius and Saba"
country_boh="Bosnia and Herzegovina"
country_bot="Botswana"
country_bou="Bouvet Island"
country_bra="Brazil"
country_bri="British Indian Ocean Territory"
country_bru="Brunei Darussalam"
country_bul="Bulgaria"
country_burf="Burkina Faso"
country_buru="Burundi"
country_cam="Cambodia"
country_camer="Cameroon"
country_cav="Cape Verde"
country_cay="Cayman Islands"
country_cenaf="Central African Republic"
country_cha="Chad"
country_chi="Chile"
country_chr="Christmas Island"
country_coc="Cocos (Keeling) Islands"
country_col="Colombia"
country_com="Comoros"
country_con="Congo"
country_cor="Congo, the Democratic Republic of the"
country_cki="Cook Islands"
country_cos="Costa Rica"
country_ci="Côte d'Ivoire"
country_cro="Croatia"
country_cub="Cuba"
country_cur="Curaçao"
country_cyp="Cyprus"
country_cze="Czech Republic"
country_den="Denmark"
country_dj="Djibouti"
country_dom="Dominica"
country_dop="Dominican Republic"
country_ecu="Ecuador"
country_egy="Egypt"
country_eis="El Salvador"
country_eqc="Equatorial Guinea"
country_eri="Eritrea"
country_est="Estonia"
country_eth="Ethiopia"
country_fim="Falkland Islands (Malvinas)"
country_fai="Faroe Islands"
count_fi="Fiji"
count_fin="Finland"
country_fg="French Guiana"
country_fp="French Polynesia"
country_fst="French Southern Territories"
country_ga="Gabon"
country_gam="Gambia"
country_geo="Georgia"
country_ger="Germany"
country_gha="Ghana"
country_gib="Gibraltar"
country_gre="Greece"
country_grd="Greenland"
country_gra="Grenada"
country_guad="Guadeloupe"
coun_gm="Guam"
country_gua="Guatemala"
country_guer="Guernsey"
country_gui="Guinea"
country_gub="Guinea-Bissau"
coun_gua="Guyana"
coun_hai="Haiti"
country_himi="Heard Island and McDonald Islands"
country_hs="Holy See (Vatican City State)"
country_ho="Honduras"
coun_hk="Hong Kong"
coun_hu="Hungary"
coun_ice="Iceland"
coun_ind="Indonesia"
coun_iir="Iran, Islamic Republic of"
coun_ira="Iraq"
coun_ire="Ireland"
coun_iom="Isle of Man"
coun_ita="Italy"
coun_jam="Jamaica"
coun_jer="Jersey"
coun_jo="Jordan"
coun_kaz="Kazakhstan"
coun_ken="Kenya"
coun_kir="Kiribati"
coun_kdp="Korea, Democratic People's Republic of"
coun_kp="Korea, Republic of"
coun_ku="Kuwait"
coun_ky="Kyrgyzstan"
coun_lap="Lao People's Democratic Republic"
coun_la="Latvia"
coun_leb="Lebanon"
coun_les="Lesotho"
coun_lib="Liberia"
coun_lia="Libya"
coun_lin="Liechtenstein"
coun_lth="Lithuania"
coun_lu="Luxembourg"
coun_mac="Macao"
coun_may="Macedonia, the former Yugoslav Republic of"
coun_mad="Madagascar"
coun_mal="Malawi"
coun_mald="Maldives"
coun_mali="Mali"
coun_malt="Malta"
coun_mari="Marshall Islands"
coun_mar="Martinique"
coun_mau="Mauritania"
coun_maur="Mauritius"
coun_mye="Mayotte"
coun_mfs="Micronesia, Federated States of"
coun_mor="Moldova, Republic of"
coun_mon="Monaco"
coun_mona="Mongolia"
coun_mot="Montenegro"
coun_moe="Montserrat"
coun_moc="Morocco"
coun_moz="Mozambique"
coun_myr="Myanmar"
coun_nam="Namibia"
coun_nau="Nauru"
coun_nep="Nepal"
coun_net="Netherlands"
coun_nec="New Caledonia"
coun_nez="New Zealand"
coun_nic="Nicaragua"
coun_nig="Niger"
coun_nigr="Nigeria"
coun_niu="Niue"
coun_noi="Norfolk Island"
coun_nom="Northern Mariana Islands"
coun_now="Norway"
coun_om="Oman"
coun_pak="Pakistan"
coun_pal="Palau"
coun_pto="Palestinian Territory, Occupied"
coun_pan="Panama"
coun_neca="New Caledonia"
coun_para="Paraguay"
coun_per="Peru"
coun_phi="Philippines"
coun_pit="Pitcairn"
coun_pol="Poland"
coun_por="Portugal"
coun_pur="Puerto Rico"
coun_qat="Qatar"
coun_rui="Réunion"
coun_rom="Romania"
coun_rf="Russian Federation"
coun_rwa="Rwanda"
coun_sb="Saint Barthélemy"
coun_sht="Saint Helena, Ascension and Tristan da Cunha"
coun_skn="Saint Kitts and Nevis"
coun_sl="Saint Lucia"
coun_sm="Saint Martin (French part)"
coun_spm="Saint Pierre and Miquelon"
coun_svg="Saint Vincent and the Grenadines"
coun_sam="Samoa"
coun_smo="San Marino"
coun_stp="Sao Tome and Principe"
coun_sab="Saudi Arabia"
coun_sen="Senegal"
coun_ser="Serbia"
coun_sey="Seychelles"
coun_sil="Sierra Leone"
coun_smd="Sint Maarten (Dutch part)"
coun_slk="Slovakia"
coun_slv="Slovenia"
coun_sid="Solomon Islands"
coun_som="Somalia"
coun_saf="South Africa"
coun_sgs="South Georgia and the South Sandwich Islands"
coun_ssu="South Sudan"
coun_spn="Spain"
coun_sln="Sri Lanka"
coun_sud="Sudan"
coun_sur="Suriname"
coun_sjm="Svalbard and Jan Mayen"
coun_swl="Swaziland"
coun_swe="Sweden"
coun_swz="Switzerland"
coun_sar="Syrian Arab Republic"
coun_tp="Taiwan, Province of China"
coun_tas="Tajikistan"
coun_tur="Tanzania, United Republic of"
coun_thl="Thailand"
coun_til="Timor-Leste"
coun_tgo="Togo"
coun_tok="Tokelau"
coun_ton="Tonga"
coun_trt="Trinidad and Tobago"
coun_tun="Tunisia"
coun_tuk="Turkey"
coun_tis="Turkmenistan"
coun_tci="Turks and Caicos Islands"
coun_tuv="Tuvalu"
coun_uga="Uganda"
coun_ukr="Ukraine"
coun_uae="United Arab Emirates"
coun_ukm="United Kingdom"
coun_usmi="United States Minor Outlying Islands"
coun_ury="Uruguay"
coun_uzb="Uzbekistan"
coun_vat="Vanuatu"
coun_vbr="Venezuela, Bolivarian Republic of"
coun_vnm="Viet Nam"
coun_vib="Virgin Islands, British"
coun_vius="Virgin Islands, U.S."
coun_wf="Wallis and Futuna"
coun_wsh="Western Sahara"
coun_yem="Yemen"
coun_zam="Zambia"
coun_zbw="Zimbabwe"

//registerInfoNote.html
new_product_info="Get access to product support, software update notifications and information on new products when your register your WiFi extender."
register_at="You can also register at <a href="http://my.netgear.com/registration" target="_blank">my.netgear.com/registration</a>"

//screen8-extender-good.html
wifi_setting="WiFi Settings"
pwd_setting="Password Settings"
do_more="Do More"
acc_schedule="Access Schedule"
wifi_cov="WiFi Coverage"
fast_lane="FastLane"
usb_port="USB Port"
extender_conn_run="Your WiFi extender connection is up and running."
conn_again="Smart Setup"
conn_24g_netwk="Connection to Existing Network (2.4GHz)"
conn_5g_netwk="Connection to Existing Network (5GHz)"
extend_24g_status="Extender WiFi Status (2.4GHz)"
extend_5g_status="Extender WiFi Status (5GHz)"
wf_analytics_app="WiFi Analytics App"
opti_wifi="Optimize your WiFi network with the free app for Android."
install_now_mark="Install Now »"
help_inquer="Need Help?"
way_submit_question="Submit a question to our support team over chat, email or phone."
foot_lic="License"
foot_search="Search Help"

//screen8-extender-noConnection.html
info_improve_conn="Move your extender closer to your router to improve connection."

//wifiSettings.html
region_setting="Regional Settings:"
enable_2g_5g="Enable 2.4GHz & 5GHz WiFi"
enable_2g="Enable 2.4GHz WiFi"
enable_5g="Enable 5GHz WiFi"
broadcast_network="Broadcast this Network name (SSID)"
get_ip_dynamically="Dynamically get IP Address From Router"
wifi_device="WiFi Devices"
disable_access_ctrl="Disable Access Control"
add_wifi_dev="Add a WiFi Device"
pin_enable="Enable WPS PIN"
disable_pin_info="Auto disable the PIN after"
fail_entry="failed PIN entries, to prevent PIN compromise."
led_blink="The device WPS LED will keep blinking slowly if the PIN has been auto-disabled"
keep_24g_wifi_setting="Keep existing WiFi settings for 2.4GHz network"
keep_5g_wifi_setting="Keep existing WiFi settings for 5GHz network"
wifi_disable="Disable WiFi"

//pwdSettings.html
pwd_protect_info="Turn on or off password protection or change a password to protect unauthorized access to the extender web menu and Smart Setup."
pwd_on="Password On"
pwd_off="Password Off"
new_user_nm="New User Name"
new_pwd_char="New Password (10-32 characters):"

//backUpSettings.html
create_backup_file="Create a backup file of your current WiFi Extender settings."
backup_upper="BACKUP"
restore_settings_way="Restore settings from a previously saved file."
browse_upper="BROWSE"
reset_lower="Reset"
restore_default_setting="Restore all settings to factory defaults."
reset_upper="RESET"
restore_upper="RESTORE"

//fwUpdate.html
check_update="Check for Update"
check_online="CHECK ONLINE"
upload_file="Upload Update File"
select_update_file="Locate and select the update file on your device."
upload_upper="UPLOAD"

//accessSchedule.html
wifi_access_schedule="You can use this feature to control access to all users during specific periods of the day. You can also use this feature for parental controls or security. Access Schedule disables your Internet access based on times you set."
access_on="Access Schedule On"
access_off="Access Schedule Off"
sel_days="Select Days"
only_weekdays="Weekdays Only"
only_weekend="Weekend Only"
time_for_days="Same Time for All Days"
select_time_for_days="Select Times for Selected Day"
24_hours="24 Hours"
sys_clock="Extender Clock"
sync_with_clock="Sync Clock"
maintain_internal_clock="Set the internal WiFi Extender clock. Your settings need to be accurate in order for WiFi access schedules to work correctly."

//accessScheduleNote.html
access_schedule_inter="Enabling Access Schedule will also disable your Internet access for both wireless and wired connections on specified days."

//guestNetwork.html
guest_network_info="A guest network creates a separate wireless network for guests. Wireless devices can join the guest network and connect to the Internet without accessing your private network."
band_mark="Band"
ssid_mark="Network Name (SSID)"
broadcast_ssid="Broadcast Network Name (SSID)"
add_guest_netw="Add a Guest Network"

//connectedeviceInfo.html
conn_dev_for="Connected Devices for:"

//wifiCoverage.html
adjust_extend_wifi_info="Adjust the output and range of your extended WiFi network. For a smaller coverage area, choose a lower output power percentage. For a larger coverage area, select a higher output power percentage."
wireless_out_power="Wireless Output Power"

//fastLane.html
fast_lane_head="FastLane Technology"
enable_fastlane_info="Enabling FastLane Technology mode allows you to use both WiFi bands to establish one super high-speed connection; ideal for HD streaming & gaming."
basic_option="<strong>Basic</strong> - Connect devices on both 2.4 and 5Ghz bands at the same time. Extends both WiFi bands at the same time (2.4 and 5Ghz), but reduces WiFi performance."
fastlane_option="<strong>FastLane Technology</strong> - Offers maximum performance but limits connection to one band (2.4 or 5GHz)."
extender_info_one="Router-to-Extender in 2.4 GHz only and Extender-to-Device in 5GHz only ."
extender_info_two="Router-to-Extender in 5GHz only and Extender-to-Device in 2.4GHz only (Router must support 5GHz band)."

//usbPort.html
general_mark="General"
usb_port_on="USB Port On"
usb_port_off="USB Port Off"
share_content="Share Content"
share_printer="Share Printer"

update_mark="Update"
network_neighbor="Network Neighborhood"
conn_device="Connected Devices"
usb_driver="Drive"
share_location="Network Location"
avai_space="Available Space"
add_folder_sign="Add Folder"
content_scan_tip="Content Scanning (when new files are added)"

//csrf_timeout.htm
csrf_timeout="Sorry,your timestamp is expired.<br> Please click the menu to re-enter the page."

//web_login.html
login_page="User Login"
login_email="Email"
login_passwd="Password"
login_checkbox="Remember me"
login_btn="LOG IN"
login_help="Username & Password Help"
login_setup_btn="NEW EXTENDER SETUP"
login_error="Username and password do not match."
extender_setup="Create Account"
passwod_recovery="Your email and password are listed below:"
extender_accept_1="I Accept to the Terms of Service"
extender_accept_2="All fields required unless marked as "optional""

//extra strings
pwd_tip_text="Use this password for the 5GHz network"
foot_search_ph="Type search term..."
setup_later="Setup Later"
later_note="You can skip setup by pressing Setup Later. You will have to connect the extender to your existing network by running setup at a later stage."
ap_advance_pop="Only one band can be disabled with Wireless Access Point option in AP mode."

//AP mode page
connection_issue_note1="The extender can't connect to the router."
connection_issue_note2="Make sure that the Ethernet cable is securely plugged into the port on the extender and the router."
ap_select_no_1="I want to configure the Extender myself."
ap_select_no_2="I want to configure static IP address for Access Point mode."
ap_try_again_or_manual_config="Do you want Smart Setup to try again?"
ap_fixed_ip_setting_note="Note: After you click <b>Next</b>, this extender will be assigned a new IP address. When it happens, your browser might be disconnected from the network. To reconnect to the extender, you may need to change your device's IP address. Then close the browser window, and launch your browser again."

//WPS_NEW_GUI
wps_success_new="Your device has successfully connected to the extender."
wps_fail_new="Your device was not able to connect to the extender."
wps_push_button_text_new="Press the WPS button on your WiFi client device. Within 2 minutes, press the physical WPS button on the extender or the WPS button below."
wps_pin_p_new="Locate the security pin on your WiFi client device and enter the pin below."

//access schedule
sys_clock_auto="Automatic (recommended)"
sys_clock_manual="Manual"
sys_clock_manual_note="If you choose to manually set the clock, after a power cycle the access schedule will be disabled until the clock is set again."

new_firmware_avail_pop="There is a new update available that improves your extender. Click UPDATE below to start."
sync_clock_pop="The access schedule is disabled. Click OK below to sync system clock again."

browser_support="NETGEAR recommend you to upgrade your Internet Explorer browser to Internet Explorer 8 or higher to use NETGEAR genie for installation."
wifi_ext="WiFi Extender"
wifi_channel="WiFi Channel"
wifi_speed="WiFi Speed"
wifi_pwd="WiFi Password"
wifi_sec_type="Security Type"
sync_clock_note="Note: Access schedule works only in extender mode."

pwd_short="Too short"
pwd_long="Too long"
pwd_weak="Weak"
pwd_good="Good"
pwd_strong="Strong"
pwd_same="Username and Password identical."
pwd_no_match="NO MATCH!"
pwd_error_1="The password should consist of "
pwd_error_2=" characters"
see_more="See More"
see_less="See Less"

add_time="Add Time"
sche_times="Scheduled Times"
sche_note="Your Internet connection will be disabled during the following times:"
sync_clock_warn="Do you also want to change internal WiFi Extender clock to "

access_ctrl="Access Control"
acl_allow="Allow"
acl_deny="Deny"
acl_blocked="Blocked"
amber_info="Amber indicates <b>good connection</b>"
green_info="Green indicates <b>best connection</b>"
red_info="Red indicates <b>poor connection</b>"
closer_extender="Move the computer or mobile device closer to the extender"
closer_router="Move the extender closer to the router."
extender_str="Extender"
device_str="Device"
pwd_answer="Answer"
ethernet_link="Ethernet"
re_enter_pwd="Re-enter Password"
router_str="Router"
select_folder="<Select a Folder>"
fail_pin_info="You must enter a number between 3-10 for the failed PIN entry value."
share_folder_full="You have reached the maximum number of shared folders."
schedule_on="Access Scheduling is currently on."

//OtherSettings.html
restart_lower="Restart"
restart_extender="Remotely power cycle your extender by pressing the button below."
led_logo="LED Logo"
led_on_off="Turn the NETGEAR LED on or off."
comfirm_restart="Restart the extender by turning it off and back on again. It takes two minutes for extender to start."
disable_schedule="Your Internet access is disabled because Access Scheduling is currently on. Do you want to turn off Access Scheduling?"
turn_off_schedule="Turn off Access Scheduling"

no_usb_mount="Select a USB device to be removed."
timeout_warning="Your session will time out in one minute. Would you like to extend your session for another five minutes?"
timeout="Your session timed out due to inactivity. Click the OK button to log in again."
access_max_number="Max number of rules reached"
apmode_no_ethernet="Your access point has no connection to the router. Check your Ethernet connection."
apmode_no_internet="Your access point has no Internet access. Check to make sure that your router has an Internet connection."

help_support_url_EX3800="http://support.netgear.com/product/EX3800"
device_title_EX3800="NETGEAR EX3800"
wlan_network_mark_EX3800="My EX3800 Wireless Network "
thank_login_info_EX3800="Thank you for purchasing Wireless-N 300 Universal WiFi Extender.  Be sure to use firmware update assistant periodically to take dadvantage of improvement and feature additions Netgear offers for this product.<br><br>To take advantage of Wireless-N feature offered by the EX3800, use a wireless adapter with this logo."
error_module_EX3800="Error upgrade file module name! (Module name is \"EX3800\") "
ca_wlan_network_mark_EX3800="My EX3800 Wireless Network"
ca_add_bookmark_EX3800="Do you want to add \"EX3800 Configuration\" as a bookmark?"
add_bookmark_tip="Do you want to add NETGEAR genie as a browser bookmark?"
add_bookmark_fail="We could not add the bookmark. Add the bookmark directly from your browser."
log_out_link="Log Out"
wireless_link="Wireless"
password_link="Password"
other_link="Other"
keep_wifi_setting="Keep existing WiFi settings"

DFS_radar_mark="This DFS channel is not allowed to use because the Radar was detected before."
DFS_radar_mark0=" You can change another channel or wait "
DFS_radar_mark1=" min(s) "
DFS_radar_mark2=" second(s) to use this channel."
DFS_warning="You select a DFS channel, the channel will be changed automatically if any Radar is detected."

web_services_title="Web Services Management"
local_manage="Local Management"
https_redirect="Always Use HTTPS to Access Extender"
