Bug Fixes:

• Fixes the issue where only 1 or 2 entries remain on the SNMPv1/v2 community table on the System>SNMP>SNMPv1/v2>Community Configuration page after a system reboot. 
• Fixes the issue that the SNMP trap server address set through the device UI is not saved in the configuration file after a system reboot. 

Known Issues:

• The Registration page displays again after a reboot even if it was turned off before.
  Workaround: Close the registration window or register the device.
• If the connecting partner device is 1000Mbps, the port speed on the partner device displays as 10 Mbps after disabling the port on the XS728T/XS748T.
  Workaround: Unplug the cable.
• When configuring the management VLAN other than VLAN 1, the default static IP (192.168.0.239) becomes 0.0.0.0.
  Workaround: Use DHCP or assign a valid static IP address.
• The cable test is effective for copper ports linked at 10G speed with Cat5e cables. With other link speeds or cable types, the results might not be as accurate.
• If updating firmware using a USB device, the USB device must support the FAT32 file type. The NTFS file type is NOT supported.

Download link: https://www.downloads.netgear.com/files/GDC/XS728T/XS728T_XS748T_V6.5.1.65.zip

Firmware Update Instructions:

To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.