WGR614v9 Firmware Version 1.0.18

Published May 08, 2008.

Modifications and Bug Fixes:

  1. Fixed: Using the special character ‘&’ in a service name on the Block Service GUI will cause the GUI to be inaccessible. Rebooting the router is able to get the GUI back, but accessing the Block Service page makes the GUI inaccessible again. Users need to restore the router to its factory default to get the GUI working normally. 
  2. Fixed: When the LAN IP setting is changed, the configured static DHCP IP reservations are cleared.
  3. Fixed: There is no option in GUI to disable the SIP ALG.

Known Issues:

  1. FVS114 VPN sometimes cannot pass through the router.

Installation Instructions:

  1. Download the file to a convenient place such as your desktop.

    Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

  2. Open a Web browser.
  3. Access the router (http://192.168.1.1 or the Default Gateway address if the router's default IP was changed).
  4. Log in the router (User Name = admin and Password = password, unless you changed it).
  5. Write down all settings that you entered when previously configuring. (Usually this includes information such as ISP configuration and wireless security settings.)
  6. Under Maintenance, click Router Upgrade.
  7. Click Browse and locate the firmware upgrade file.
  8. Click Upload.
  9. Wait for the router to reboot.
  10. Under Maintenance, click Settings Backup, then click Erase. (Or press the reset button on the back for 10 seconds.)
  11. Wait one minute for the router to reboot.
  12. Manually enter the configuration information you wrote down in Step 4.

 

Document Type:

Downloads > Driver/Software/Firmware
Published 12/02/2008 12:56 PM   |   Updated 10/01/2011 11:43 AM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.