New Features and Enhancements:

• Support for new countries: Australia
• Energy efficiency mode (EEM).
• Multi Pre-Shared Key (PSK). 
• System stability improvements
• The AP now avoids edge channels on 5 GHz radio to improve throughput for connected clients

Security Fixes:

• Fixes security vulnerabilities.

For more information about security vulnerabilities, visit https://www.netgear.com/about/security/

Bug Fixes:

• Fixes a low throughput issue when AP management VLAN is configured to a non-default VLAN
• Fixes an issue where clients connected to different NAT Mode networks can reach each other
• Fixes an issue where Client Isolation does not work when the AP’s IP address is reconfigured from static IP to dynamic IP, and vice versa
• Fixes an issue where a 6 GHz SSID stops broadcasting after any configuration change

Insight only:

• Fixes incorrect Cloud LED behavior when using the Insight Locate Device tool
• Fixes an issue where the SSID stops broadcasting after restarting the AP through Insight

Known Issues:

• Fast roaming (802.11r) may not work for clients connected to a SSID where M-PSK feature is enabled.
• The wireless 1 SSID might not broadcast after Day Zero configuration if the AP has a static IP address and a non-default security type.
  Workaround: Do not change the SSID security mode  during Day Zero configuration. Wait to change SSID security until Day Zero configuration is complete, and then reboot the AP.
• Radio information on AP dashboard may not load sometimes.
  Workaround:  Please refresh the UI.
• AP does not fall back to the configured DFS channel after the required wait period following a RADAR event detection. 
• Clients fail to reach to the Internet when connected to a NAT mode SSID with non-default management VLAN and URL filtering enabled.
  Workaround:  Disable URL filtering if NAT mode is enabled.
• Some clients may experience connectivity issues on 5 GHz higher band channels and may switch to 2.4 GHz band.
  Workaround: Configure 5GHz lower band channels.
• Some iOS devices with specific iOS versions might fail to connect to a WPA3 enterprise SSID.
  Workaround: Upgrade the device to the latest iOS version.
• Some clients might not display a pop-up window when connecting to a guest SSID, or there might be a delay before the splash page displays.
  Workaround: Use a web browser to access the Internet.
• aplogin.com and aplogin.net might not redirect to the login page on some Android clients with specific Chrome browser versions.
  Workaround: Enter the access point's IP address to access the login page.
• Some older generation iOS devices with iOS version 14.4.2 might fail to connect to an SSID using WPA3 Personal security.
  Workaround: Change the SSID security to WPA3/WPA2 Personal.

Download Link: https://www.downloads.netgear.com/files/GDC/WAX630E/WAX630E_V10.2.0.17.zip

Firmware Update Instructions:

To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.