Bug Fixes:

• Fixes the issue where clients might fail to rejoin the network when the wireless SSID is configured with 802.11r Fast Roaming enabled and the AP has been up for two weeks or more.  

Known Issues:

• When Dynamic VLAN is enabled, attempting to change the management VLAN fails and throws an invalid error message.
  Workaround: Temporarily disable Dynamic VLAN, change the management VLAN, then reenable Dynamic VLAN.
• Changes to a NAT SSID configuration can take up to 3 minutes to apply.
  Workaround: Please wait at least 3 minutes before starting to connect any clients.
• Facebook Wi-Fi authentication does not work because Facebook has discontinued the support for this feature.
  Workaround: Use the Instant Captive Portal or External Captive Portal feature or the basic Captive Portal feature.
• The captive portal splash page might display the error message "ERR_TOO_MANY_REDIRECTS" while connecting to a captive portal that is enabled on an SSID.
  Workaround: Clear the browser cache.
• 802.11r roaming does not work between an AP that runs firmware version 10.5.0.x and another AP that runs an older firmware version at the same Insight network location.
  Workaround: Upgrade all APs at an Insight network location to the latest firmware version.
• The AP stops responding after you first change or enable an Instant Captive Portal and then change or enable a dynamic VLAN (DVLAN) configuration, or the other way around.
  Workaround: After enabling the Instant Captive Portal, wait a few minutes before you enable the DVLAN configuration. Or, after enabling the DVLAN configuration, wait a few minutes before you enable the Instant Captive Portal.
• Clients connected to a captive portal that is configured on an SSID might not see the splash page for authentication when the VLAN of the SSID is the same as the management VLAN, a VLAN that is configured as a DVLAN, or a VLAN that has a multi-Pre-Shared Key (multi-PSK) configured.
  Workaround: For the SSID on which the captive portal is configured, use the default VLAN or a unique VLAN that is not used as the management VLAN, that is not a DVLAN, or that does not use MPSK.
• A RADIUS based MAC ACL does not work with multi-PSK and DVLAN.
• mDNS: A device running Windows might not discover certain printers.
  Workaround: Manually add the IP address of the printer on the Windows device.
• Your web browser might not redirect automatically to the login page after a firmware upgrade.
  Workaround: Refresh the page in your web browser.
• Radio information on the AP Dashboard page might not be displayed properly.
  Workaround: Refresh the page in your web browser.
• Captive portal authentication does not work if you simultaneously change the captive portal and the VLAN configuration for an SSID.
  Workaround: Change either the captive portal configuration or the VLAN configuration for an SSID and save the changes. Then go back to the SSID and make the other configuration changes.
• When client isolation is enabled for an SSID, clients that are connected to the SSID cannot reach each other even if their IP addresses are added to the allowed list.
• Video streaming to multiple clients does not work properly if there are more than eight clients in a single multicast group.
• If clients experience connectivity issues on the higher band channels of the 5 GHz radio and subsequently switch to the 2.4 GHz radio, they might experience lower throughput.
  Workaround: Configure lower band channels on the 5 GHz radio.
• Some newer IoT devices might experience issues connecting to the AP.
  Workaround: Upgrade the IoT devices to the latest driver version and try again. If security is set to WPA3 or WPA2/WPA3 mixed mode, change it to WPA2 mode, and try again.

Download Link: https://www.downloads.netgear.com/files/GDC/WAX625/WAX625_firmware_V10.6.1.2.zip

Firmware Update Instructions:

To update the firmware of your product, follow the instructions mentioned in the product manual. To refer the user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.