-- ******************************************************************** -- Wireless LAN Enterprise Access Point Management Base -- Copyright 2007, 2020 Netgear Inc. All rights reserved. -- This SNMP Management Information Specification -- embodies Netgear confidential and proprietary -- intellectual property. Netgear retains all title -- and ownership in the Specification including any revisions. -- -- This Specification is supplied "AS IS", Netgear -- makes no warranty, either expressed or implied, -- as to the use, operation, condition, or performance of the -- Specification. -- -- Status: Release -- Version: 9.0 -- Internal Source Code Version:9.0.0.46 -- Date: 1 Aug 2020 -- History : -- 1.0 : Initial Version -- 9.0 : Updated to MIBs to show once are deprecated.Deprecated mibs will be obeslete in next release. -- ******************************************************************** WAX6XX DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP FROM SNMPv2-CONF enterprises, IpAddress,Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, Counter32, Counter64, NOTIFICATION-TYPE, TimeTicks FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, MacAddress FROM SNMPv2-TC; -- ******************************************************************** -- * MODULE IDENTITY -- ******************************************************************** wax6xx MODULE-IDENTITY LAST-UPDATED "202008010000Z" -- 01 08, 2020 at 12:00 GMT ORGANIZATION "NETGEAR Inc." CONTACT-INFO "350 East Pumeria Drive San Jose, California 95134 Phone: (408) 907-8000 Fax: (408) 907-8097 Web Site: http://www.netgear.com" DESCRIPTION "The MIB module for 802.11a/b/g/n/ac Enterprise WiFi AP. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100).accesspoint(7).wax6xx(14)" ::= { accesspoint 14 } -- -- Node definitions -- -- The Enterprises Number -- 1.3.6.1.4.1.4526 netgear OBJECT IDENTIFIER ::= { enterprises 4526 } -- 1.3.6.1.4.1.4526.100 productID OBJECT IDENTIFIER ::= { netgear 100 } -- 1.3.6.1.4.1.4526.100.7 accesspoint OBJECT IDENTIFIER ::= { productID 7 } -- Wireless LAN Access Point Identifier -- -- ********************************************************************** -- * MIB attribute OBJECT-TYPE definitions follow -- ********************************************************************** -- ********************************************************************** -- * IP Setting Table -- ********************************************************************** basicSettings OBJECT IDENTIFIER ::= { wax6xx 1 } apName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the name of AP. The name is also the NETBIOS name of the AP. This has been deprecated for system mib" ::= { basicSettings 1 } sysMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute indicates the MAC Address of the ethernet interface." ::= { basicSettings 2 } sysVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute indicates the system firmware version." ::= { basicSettings 3 } sysCountryRegion OBJECT-TYPE SYNTAX INTEGER { unitedStates(841), albania(8), armenia(51), argentina(32), austria(40), australia(5000), azerbaijan(31), belgium(56), bulgaria(100), bahrain(48), brunei(96), bolivia(68), brazil(76), belarus(112), belize(84), canada(5001), switzerland(756), chile(152), china(156), colombia(170), costaRica(188), cyprus(196), czechRepublic(203), germany(276), denmark(208), dominicanRepublic(214), algeria(12), ecuador(218), estonia(233), egypt(818), spain(724), finland(246), france(250), unitedKingdom(826), georgia(268), greece(300), guatemala(320), hongkong(344), honduras(340), croatia(191), hungary(348), indonesia(360), ireland(372), israel(376), india(356), iran(364), iceland(352), italy(380), jordan(400), japan(392), northKorea(408), koreaRepublic(412), kuwait(414), kazakhstan(398), lebanon(422), liechtenstein(438), lithuania(440), luxembourg(442), latvia(428), morocco(504), monaco(492), macedonia(807), macau(446), malta(470), mexico(484), malaysia(458), netherlands(528), norway(578), newZealand(554), oman(512), panama(591), peru(604), philippines(608), pakistan(586), poland(616), puertoRico(630), portugal(620), qatar(634), romania(642), russia(643), saudiArabia(682), sweden(752), singapore(702), slovakRepublic(703), slovenia(705), elSalvador(222), syria(760), thailand(764), tunisia(788), turkey(792), trinidadandTobago(780), taiwan(158), ukraine(804), unitedArabEmirates(784), uruguay(858), uzbekistan(860), venezuela(862), vietnam(704), yemen(887), southAfrica(710), zimbabwe(716) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the region of operation for which the wireless interface is intended." ::= { basicSettings 4 } adminPasswd OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the administrator password. The AP can be managed from utilities such as ssh, HTTP/HTTPS browser, SNMP management tool and so on." ::= { basicSettings 5 } dhcpClientStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the DHCP client status. DHCP client is disabled by default." ::= { basicSettings 6 } ipAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the static management IP address of the AP." ::= { basicSettings 7 } netmaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the static netmask of the management interface." ::= { basicSettings 8 } gatewayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the static gateway IP address for the management interface." ::= { basicSettings 9 } priDnsAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the address that will be used as the first entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set to an IP address in dot format." ::= { basicSettings 10 } sndDnsAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the address that will be used as the second entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set to an IP address in dot format." ::= { basicSettings 11 } spanTreeStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the status of Spanning Tree Protocol in the AP. The default value is disable(0)." ::= { basicSettings 12 } managementVlanID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the Management VLAN ID. Default value of management VLAN ID is 1." ::= { basicSettings 13 } networkIntegrityCheck OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the status of internet connection check . AP automatically validates whether the internet connection is active before allowing wireless associations by pinging the default gateway. the default value of this variable is disable(0) ." ::= { basicSettings 14 } untaggedVlanStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the status of untagged VLAN. The untagged VLAN is enabled by default." ::= { basicSettings 15 } untaggedVlanID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the Untagged VLAN ID. Default value of untagged VLAN ID is 1." ::= { basicSettings 16 } sysHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute indicates the system hardware version." ::= { basicSettings 17 } sysSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute indicates the system serial number." ::= { basicSettings 18 } lldpStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the LLDP status. LLDP is enabled by default." ::= { basicSettings 19 } deviceMode OBJECT-TYPE SYNTAX INTEGER { ap(0), router(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the operating mode of a radio. The default value is ap(0)." ::= { basicSettings 21 } wirelessScheduleStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of Wireless Scheduling. The default value is disable(0)." ::= { basicSettings 22 } upnpStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the status of UPnP. The default value is enable(1)." ::= { basicSettings 25 } interVlanRouting OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the status of inter VLAN Routing. The inter VLAN Routing is disabled by default." ::= { basicSettings 26 } -- ********************************************************************** -- * Wireless Settings Table -- ********************************************************************** wlanSettings OBJECT IDENTIFIER ::= { wax6xx 2 } wlanSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanSettingEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "wireless interface settings table." ::= { wlanSettings 1 } wlanSettingEntry OBJECT-TYPE SYNTAX WlanSettingEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the wlanSettingTable. Each wlanSettingEntry represents a wireless profile (2.4GHz band or 5GHz band). On a single radio device, the same wireless interface can be assigned 2.4GHz profile or 5GHz profile. On a dual radio device, one of the wireless interfaces is assigned with 2.4GHz profile and the other wireless interface takes up 5GHz profile." INDEX { wlanIndex } ::= { wlanSettingTable 1 } WlanSettingEntry ::= SEQUENCE { wlanIndex INTEGER, operateMode INTEGER, radioStatus INTEGER, channel INTEGER, dataRate INTEGER, wmmSupport INTEGER, beaconInterval INTEGER, rtsThreshold INTEGER, fragLength INTEGER, dtimInterval INTEGER, preambleType INTEGER, txPower INTEGER, accessControlMode INTEGER, mcsRate INTEGER, guardInterval INTEGER, channelWidth INTEGER, rifsTransmission INTEGER, apMode INTEGER, uapsdStatus INTEGER, maxClientAssociations INTEGER, bandSteeringStatus INTEGER, bandSteeringRssi24GHz INTEGER, bandSteeringRssi50GHz INTEGER, loadBalanceStatus INTEGER, loadUtilPercent INTEGER, frameBurst INTEGER, rateLimit INTEGER, qamStatus INTEGER, dfsStatus INTEGER } wlanIndex OBJECT-TYPE SYNTAX INTEGER { band2dot4GHz(24), band5GHz(50) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Specifies one of the 2 wireless profiles." ::= { wlanSettingEntry 1 } operateMode OBJECT-TYPE SYNTAX INTEGER { dot11b(0), dot11bg(1), dot11ng(2), dot11a(3), dot11na(4) dot11ac(5) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the desired wireless operating mode. The option are: dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11bg - Both 802.11b and 802.11g wireless stations can be used. dot11ng - All 802.11b, 802.11g and 802.11ng wireless stations can be used. dot11a - Only 802.11a wireless stations can be used. dot11na - All 802.11a and 802.11na wireless stations can be used. dot11ac - All 802.11a, 802.11na and 802.11ac wireless stations can be used. The default value is dot11ng(2)." ::= { wlanSettingEntry 2 } radioStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of radio. The default value is enable(1)." ::= { wlanSettingEntry 3 } channel OBJECT-TYPE SYNTAX INTEGER { auto(0), ch1(1),ch2(2),ch3(3),ch4(4), ch5(5),ch6(6),ch7(7), ch8(8),ch9(9),ch10(10),ch11(11), ch12(12),ch13(13),ch14(14), ch34(34),ch36(36),ch38(38), ch40(40),ch42(42),ch44(44), ch46(46),ch48(48),ch52(52), ch56(56),ch60(60),ch64(64), ch100(100),ch104(104),ch108(108), ch112(112),ch116(116),ch120(120), ch124(124),ch128(128), ch132(132),ch136(136), ch140(140),ch149(149), ch153(153),ch157(157), ch161(161),ch165(165) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the channel number to be used. The default value is auto(0)." ::= { wlanSettingEntry 4 } dataRate OBJECT-TYPE SYNTAX INTEGER { best(0), rate1Mbps(2), rate2Mbps(4), rate5dot5Mbps(11), rate6Mbps(12), rate9Mbps(18), rate11Mbps(22), rate12Mbps(24), rate18Mbps(36), rate24Mbps(48), rate36Mbps(72), rate48Mbps(96), rate54Mbps(108) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the transmit rate applicable to 802.11b, 802.11bg and 802.11a modes. When the operateMode is: dot11b(0) - can set to 0:best, 2:1Mb/s, 4:2Mb/s, 11:5.5Mb/s, and 22:11 Mb/s. dot11bg(1) - can set to 0:best, 2:1Mb/s, 4:2Mb/s, 11:5.5Mb/s, 22:11 Mb/s, 12:6Mb/s, 18:9Mb/s, 24:12Mb/s, 36:18Mb/s, 48:24Mb/s, 72:36Mb/s, 96:48Mb/s, and 108:54Mb/s. dot11a(3) - can set to 0:best, 12:6Mb/s, 18:9Mb/s, 24:12Mb/s, 36:18Mb/s, 48:24Mb/s, 72:36Mb/s, 96:48Mb/s and 108:54Mb/s. The default value is best(0)." ::= { wlanSettingEntry 5 } wmmSupport OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This field indicates the status of WMM(Wireless Multimedia) suport. The default value is enable(1)." ::= { wlanSettingEntry 6 } beaconInterval OBJECT-TYPE SYNTAX INTEGER (100..1000) UNITS "1024 microsecond" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Beacon Interval. The default value is 100." ::= { wlanSettingEntry 7 } rtsThreshold OBJECT-TYPE SYNTAX INTEGER (0..2347) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the RTS threshold. The default value is 2347." ::= { wlanSettingEntry 8 } fragLength OBJECT-TYPE SYNTAX INTEGER (256..2346) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the fragmentation threshold. The default value is 2346." ::= { wlanSettingEntry 9 } dtimInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the beacon delivery traffic indication message period in multiples of beaconInterval. The default value is 3." ::= { wlanSettingEntry 10 } preambleType OBJECT-TYPE SYNTAX INTEGER { auto(0), long(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b, 802.11bg and 802.11ng modes. When set to auto(0), depending on the station type, AP selects short or long preamble. The default value is auto(0)." ::= { wlanSettingEntry 11 } txPower OBJECT-TYPE SYNTAX INTEGER { full(0), half(1), quarter(2), eighth(3), min(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the transmit power. The default value is full(0)." ::= { wlanSettingEntry 12 } accessControlMode OBJECT-TYPE SYNTAX INTEGER { disable(0), local(1), server(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates whether the access control list is enabled and the source of the database of the access control list." ::= { wlanSettingEntry 13 } mcsRate OBJECT-TYPE SYNTAX INTEGER { mcs0(0), mcs1(1), mcs2(2), mcs3(3), mcs4(4), mcs5(5), mcs6(6), mcs7(7), mcs8(8), mcs9(9), mcs10(10), mcs11(11), mcs12(12), mcs13(13), mcs14(14), mcs15(15), mcs16(16), mcs17(17), mcs18(18), mcs19(19), mcs20(20), mcs21(21), mcs22(22), mcs23(23), best(99) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the transmit rate to be used in case of 11na and 11ng modes. Rate index of 0 means 15 Mbps when the channel width is 40Mhz or dynamic-20/40 and 7.2 Mbps when the channel width is 20Mhz. Every rate index n above 0 is (n+1)*mcsRate0. ex. mcsRate1 = 2*mcsRate0. Default value is set to best" ::= { wlanSettingEntry 15 } guardInterval OBJECT-TYPE SYNTAX INTEGER { auto(0), long(800) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the guard interval. When set to auto(0), depending on the station type, AP selects 400ns or 800ns guard interval. The default value is auto(0)." ::= { wlanSettingEntry 16 } channelWidth OBJECT-TYPE SYNTAX INTEGER { static20Mhz(0), static40Mhz(1), dynamic20-40(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall set the CWM mode to 20Mhz or 40Mhz or automatically switches between 20 and 40 based on channel conditions. For 11ng mode, the default value is static20Mhz(0), when the channel is auto. For 11na mode, the default value is dynamic20-40(2), when the channel is auto." ::= { wlanSettingEntry 17 } rifsTransmission OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute sets the status of rifsTransmission. The default value of the attribute is disable(0)." ::= { wlanSettingEntry 20 } apMode OBJECT-TYPE SYNTAX INTEGER { ap(0), p2p(1), p2p-ap(2), p2mp-ap(3), p2mp(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Specifies the device operation mode. ap: device operates as an Access Point p2p: device operates as a point-to-point wireless bridge No STA are associated to the device in this mode p2p_ap: device operates as a point-to-point wireless bridge Wireless STA can be associated to the device in this mode p2mp-ap: device operates as a point-to-multipoint wireless bridge Wireless STA can be associated to the device in this mode p2mp: device operates as a point-to-multipoint wireless bridge No STA are associated to the device in this mode." ::= { wlanSettingEntry 21 } uapsdStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate whether wmm power save. The default value is enable(1) ." ::= { wlanSettingEntry 22 } maxClientAssociations OBJECT-TYPE SYNTAX INTEGER(0..128) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited" ::= { wlanSettingEntry 23 } bandSteeringStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of Band Steering. The default value is disable(0)." ::= { wlanSettingEntry 26 } bandSteeringRssi24GHz OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Band-Steering RSSI value of 2.4GHz. The default value is 15." ::= { wlanSettingEntry 27 } bandSteeringRssi50GHz OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Band-Steering RSSI value of 5GHz. The default value is 15." ::= { wlanSettingEntry 28 } loadBalanceStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of Load Balancing Mode. The default value is disable(0)." ::= { wlanSettingEntry 30 } loadUtilPercent OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Load Utilizations of new Associations. The default value is 99." ::={ wlanSettingEntry 31 } frameBurst OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of Frame Burst. The default value is disable(0)." ::= { wlanSettingEntry 32 } rateLimit OBJECT-TYPE SYNTAX INTEGER (1..50) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Rate Limit. The default value is 50." ::= { wlanSettingEntry 33 } qamStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of 802.11n QAM. The default value is disable(0)." ::= { wlanSettingEntry 34 } dfsStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the Rate Limit." ::= { wlanSettingEntry 35 } -- ********************************************************* -- VAP setting table -- ********************************************************* vapSettings OBJECT IDENTIFIER ::= { wax6xx 3 } vapSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF VapSettingEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "VAP attributes setting table." ::= { vapSettings 1 } vapSettingEntry OBJECT-TYPE SYNTAX VapSettingEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "VAP attributes setting table entry." INDEX { wlanIndex, vapIndex } ::= { vapSettingTable 1 } VapSettingEntry ::= SEQUENCE { vapIndex INTEGER, vapProfileName OCTET STRING, vapProfileStatus INTEGER, ssid OCTET STRING, hideNetworkName INTEGER, vlanID INTEGER, clientSecuritySeperation INTEGER, authenticationType INTEGER, encryption INTEGER, presharedKey OCTET STRING, wepKeyType INTEGER, wepKeyNo INTEGER, wepKey1 OCTET STRING, wepKey2 OCTET STRING, wepKey3 OCTET STRING, wepKey4 OCTET STRING, wepPassPhrase OCTET STRING, incomingQoSPolicy INTEGER, outgoingQoSPolicy INTEGER } vapIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Specifies one of the 8 VAP profiles." ::= { vapSettingEntry 1 } vapProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Name of this VAP profile." ::= { vapSettingEntry 2 } vapProfileStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of this VAP profile." ::= { vapSettingEntry 3 } ssid OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..32)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate SSID.Its length can't be larger than 32 ." ::= { vapSettingEntry 4 } hideNetworkName OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate whether to broadcast wireless network Name (SSID). The default value of this attribute is disable(0)." ::= { vapSettingEntry 5 } vlanID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the VLAN ID of the VAP. " ::= { vapSettingEntry 6 } clientSecuritySeperation OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate whether wireless clients in a BSS can communicate with each other. The default value of this attribute is disable(0)." ::= { vapSettingEntry 7 } authenticationType OBJECT-TYPE SYNTAX INTEGER { open(0), shared(1), legacy802dot1x(2), wpa(4), wpa2(8), wpaORwpa2(12), wpapsk(16), wpa2psk(32), wpapskORwpa2psk(48) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates how to authenticate the station." ::= { vapSettingEntry 8 } encryption OBJECT-TYPE SYNTAX INTEGER { none(0), wep(1), tkip(2), aes(4), tkipORaes(6) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates how to encrypt the packets sent to a station." ::= { vapSettingEntry 9 } presharedKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..63)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate preshared key used in the following authenticationtype: wpapsk(16), wpa2psk(32), wpapskORwpa2psk(48)." ::= { vapSettingEntry 10 } wepKeyType OBJECT-TYPE SYNTAX INTEGER { hex64(64), hex128(128), hex152(152) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field shall indicate the type of WEP key." ::= { vapSettingEntry 11 } wepKeyNo OBJECT-TYPE SYNTAX INTEGER { wepKey1(1), wepKey2(2), wepKey3(3), wepKey4(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the number of default wep key." ::= { vapSettingEntry 12 } wepKey1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the key value of the first default wep key." ::= { vapSettingEntry 13 } wepKey2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the key value of the second default wep key." ::= { vapSettingEntry 14 } wepKey3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the key value of the third default wep key." ::= { vapSettingEntry 15 } wepKey4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the key value of the fourth default wep key." ::= { vapSettingEntry 16 } wepPassPhrase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..39)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate WEP pass phrase, used to generate four WEP keys." ::= { vapSettingEntry 17 } incomingQoSPolicy OBJECT-TYPE SYNTAX INTEGER { remove-applied-policy(0), apply-policy-one(1), apply-policy-two(2), apply-policy-three(3), apply-policy-four(4), apply-policy-five(5), apply-policy-six(6), apply-policy-seven(7), apply-policy-eight(8) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the policy index to be configured to the selected interface. " ::= { vapSettingEntry 18 } outgoingQoSPolicy OBJECT-TYPE SYNTAX INTEGER { remove-applied-policy(0), apply-policy-one(1), apply-policy-two(2), apply-policy-three(3), apply-policy-four(4), apply-policy-five(5), apply-policy-six(6), apply-policy-seven(7), apply-policy-eight(8) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the policy index to be configured to the selected interface. " ::= { vapSettingEntry 19 } -- ********************************************************* -- WDS settings -- ********************************************************* wdsSettings OBJECT IDENTIFIER ::= { wax6xx 4 } wdsSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF WdsSettingEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "WDS attributes in tablular form to allow for multiple instances of wds setting profile." ::= { wdsSettings 1 } wdsSettingEntry OBJECT-TYPE SYNTAX WdsSettingEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the wdsTable." INDEX { wlanIndex, wdsIndex } ::= { wdsSettingTable 1 } WdsSettingEntry ::= SEQUENCE { wdsIndex INTEGER, wdsProfileName OCTET STRING, wdsProfileStatus INTEGER, remoteMacAddress MacAddress, wdsAuthenticationtype INTEGER, wdsEncryption INTEGER, wdsPresharedKey OCTET STRING, wdsWepKeyType INTEGER, wdsWepKey OCTET STRING, wdsWepPassPhrase OCTET STRING } wdsIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Specifies one of the 4 wireless bridge profiles." ::= { wdsSettingEntry 1 } wdsProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Name of the wireless bridge profile." ::= { wdsSettingEntry 2 } wdsProfileStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of this wireless bridge profile." ::= { wdsSettingEntry 3 } remoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the link partner's MAC address." ::= { wdsSettingEntry 4 } wdsAuthenticationtype OBJECT-TYPE SYNTAX INTEGER { open(0), wpapsk(2), wpa2psk(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates how to authenticate the link partner." ::= { wdsSettingEntry 5 } wdsEncryption OBJECT-TYPE SYNTAX INTEGER { none(0), wep(1), tkip(2), aes(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates how to encrypt the packets sent to link partner." ::= { wdsSettingEntry 6 } wdsPresharedKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..63)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate preshared key used by wpapsk or wpa2psk." ::= { wdsSettingEntry 7 } wdsWepKeyType OBJECT-TYPE SYNTAX INTEGER { hex64(64), hex128(128), hex152(152) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field shall indicate the type of WEP key." ::= { wdsSettingEntry 8 } wdsWepKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the value of the WEP key." ::= { wdsSettingEntry 9 } wdsWepPassPhrase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..39)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate WEP pass phrase, used to generate the WEP key." ::= { wdsSettingEntry 10 } -- ********************************************************* -- WMM settings -- ********************************************************* -- ********************************************************* -- Remote Settings Information -- ********************************************************* remoteSettings OBJECT IDENTIFIER ::= { wax6xx 6 } inactivityTimeOut OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the session inactivity time after which the session will be terminated. This is applicable to Telnet, SSH and HTTP sessions. Default value is 300 seconds." ::= { remoteSettings 1 } sshStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the SSH daemon status. The default value is enable(1)." ::= { remoteSettings 2 } telnetStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the telnet daemon status. The default value is enable(1)." ::= { remoteSettings 3 } snmpStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the SNMP agent status. The default value is enable(1)." ::= { remoteSettings 4 } trapServerIP OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..39)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the trap server IP address." ::= { remoteSettings 5 } trapPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the trap port. The default value of this variable is 162." ::= { remoteSettings 6 } trapServerCommunity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the community name for traps." ::= { remoteSettings 7 } readOnlyCommunity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string." ::= { remoteSettings 8 } readWriteCommunity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string." ::= { remoteSettings 9 } genieProStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Setting this object causes the device to enable Genie Pro remote management. The default value is enable(1)." ::= { remoteSettings 10 } httpStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the http web management status. The default value is enable(1)." ::= { remoteSettings 11 } httpsStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the https web management status. The default value is disable(0)." ::= { remoteSettings 12 } -- ********************************************************************** -- * Station List Table -- ********************************************************************** stationList OBJECT IDENTIFIER ::= { wax6xx 8 } stationListTable OBJECT-TYPE SYNTAX SEQUENCE OF StationListEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "List of associated stations in a tabular form." ::= { stationList 1 } stationListEntry OBJECT-TYPE SYNTAX StationListEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the stationListTable." INDEX { wlanIndex, macAddress } ::= { stationListTable 1 } StationListEntry ::= SEQUENCE { macAddress MacAddress, clientIpaddr IpAddress, associationTime DisplayString, clientWirelessMode INTEGER, associatedSsid DisplayString, associatedBssid MacAddress, associatedSNR INTEGER, clientChannelWidth INTEGER, stationStatus INTEGER, stationRssi INTEGER, idleTime INTEGER, stationChannel INTEGER, txDataRate DisplayString, rxDataRate DisplayString, stationState DisplayString, stationAuthenticationType INTEGER, stationAID INTEGER, stationTxSeq INTEGER, stationRxSeq INTEGER, stationCapability DisplayString, stationCipher DisplayString, stationRecvPayloadBytes INTEGER, stationTransPayloadBytes INTEGER } macAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate MAC address of the associated stationID." ::= { stationListEntry 1 } clientIpaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate IP address of the associated stationID." ::= { stationListEntry 2 } associationTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate ssid of the VAP to which the station is associated." ::= { stationListEntry 3 } clientWirelessMode OBJECT-TYPE SYNTAX INTEGER { dot11b(0), dot11bg(1), dot11ng(2), dot11a(3), dot11na(4) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the wireless mode of the associated stationID." ::= { stationListEntry 4 } associatedSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate ssid of the VAP to which the station is associated." ::= { stationListEntry 5 } associatedBssid OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate bssid of the VAP to which the station is associated." ::= { stationListEntry 6 } associatedSNR OBJECT-TYPE SYNTAX INTEGER UNITS "0.25dBm" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the noise margin of Ap with respect to the its recieved signal from station." ::= { stationListEntry 7 } clientChannelWidth OBJECT-TYPE SYNTAX INTEGER { none(0), static20MHz(1), static40MHz(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the channel width for the associated station in 11n mode. Not applicable for a station in 11a/b/g mode." ::= { stationListEntry 8 } stationStatus OBJECT-TYPE SYNTAX INTEGER { none(0), authenticating(1), authenticated(2), associating(3), associated(4) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the status of station." ::= { stationListEntry 9 } stationRssi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Receive Signal Strength Indicator. This attribute shall indicate the strength of an incomming signal of station." ::= { stationListEntry 10 } idleTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the Idle time of station." ::= { stationListEntry 11 } stationChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the channel number used." ::= { stationListEntry 12 } txDataRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the TX DataRate." ::= { stationListEntry 13 } rxDataRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the Rx DataRate." ::= { stationListEntry 14 } stationState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the station State." ::= { stationListEntry 15 } stationAuthenticationType OBJECT-TYPE SYNTAX INTEGER { none(0), open(1), shared(2), legacy8021x(3), auto(4), wpa(5), wpa2(6) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicates how to authenticate the station." ::= { stationListEntry 16 } stationAID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the association ID value assigned by the AP to identify the association." ::= { stationListEntry 17 } stationTxSeq OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the Transmit Sequence of the station." ::= { stationListEntry 18 } stationRxSeq OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the Receive Sequence of the station." ::= { stationListEntry 19 } stationCapability OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the capability of station associated." ::= { stationListEntry 20 } stationCipher OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the Cipher of station associated." ::= { stationListEntry 21 } stationRecvPayloadBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the count of the payload bytes received from the wireless client." ::= { stationListEntry 22 } stationTransPayloadBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This attribute shall indicate the count of the payload bytes sent to the wireless client." ::= { stationListEntry 23 } -- ********************************************************* -- Command Information -- ********************************************************* userCommand OBJECT IDENTIFIER ::= { wax6xx 10 } resetAP OBJECT-TYPE SYNTAX INTEGER { reboot(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Setting this object causes the device to reboot. The actual value is ignored." ::= { userCommand 1 } firmwareUpgrade OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..100)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Setting this object to the name of a file, causes the device to download /.Run the HTTPd in the remote machine After the file is downloaded, it is installed replacing the existing firmware, and the device is restarted." ::= { userCommand 2 } backupSettings OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..100)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Setting this object to the hostname username password and name of a file, causes the running config to be saved to the file. ipAddress username password filename ." ::= { userCommand 3 } restoreSettings OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..100)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Setting this object to the hostname username password and name of a file, causes the device to download the file .After the file is downloaded, it is copied to the start-up config, and the device is restarted." ::= { userCommand 4 } restoreFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { restore (1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Setting this object causes the device to restore factory default settings. The actual value is ignored." ::= { userCommand 5 } restoreDefaultPassword OBJECT-TYPE SYNTAX INTEGER { restore (1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Setting this object causes the device to restore the default administrator password." ::= { userCommand 6 } -- ********************************************************************** -- * System Time Setting Table -- ******************************************************************** timeSettings OBJECT IDENTIFIER ::= { wax6xx 11 } deprecatedTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This field indicates the deprecated system time in a format: YYYY/MM/DD hh:mm:ss." ::= { timeSettings 1 } timeZone OBJECT-TYPE SYNTAX INTEGER { afghanistan(0), albania(1), algeria(2), american-samoa(3), andorra(4), angola(5), anguilla(6), antigua-and-barbuda(7), argentina(8), armenia(9), aruba(10), australia-lordHoweIsland(11), australia-new-south-wales-capitol-territory-victoria(12), australia-northern-territory(13), australia-queensland(14), australia-south-australia-and-broken-hill(15), australia-tasmania(16), australia-western(17), austria(18), azerbaijan(19), bahamas(20), bahrain(21), bangladesh(22), barbados(23), belarus(24), belgium(25), belize(26), benin(27), bermuda(28), bhutan(29), bolivia(30), bonaire(31), bosnia-herzegovina(32), botswana(33), brazil-east-including-all-coast-and-brasilia(34), brazil-fernando-de-noronha(35), brazil-trinity-of-acre(36), brazil-west(37), british-virgin-islands(38), brunei(39), bulgaria(40), burkina-faso(41), burma(42), burundi(43), cambodia(44), cameroon(45), canada-atlantic(46), canada-central(47), canada-eastern(48), canada-mountain(49), canada-newfoundland(50), canada-pacific-and-yukon(51), canada-saskatchewan(52), cape-verde(53), cayman-islands(54), central-african-republic(55), chad(56), chile(57), chile-easter-island(58), china(59), christmas-islands(60), cocos-keeling-islands(61), colombia(62), congo(63), cook-islands(64), costa-rica(65), cote-d-ivoire(66), croatia(67), cuba(68), curacao(69), cyprus(70), czech-republic(71), denmark(72), djibouti(73), dominica(74), the-dominican-republic(75), ecuador(76), ecuador-galapagos-islands(77), egypt(78), el-salvador(79), equatorial-guinea(80), eritrea(81), estonia(82), ethiopia(83), faroe-islands(84), fiji(85), finland(86), france(87), french-guiana(88), french-polynesia(89), gabon(90), the-gambia(91), georgia(92), germany(93), ghana(94), gibraltar(95), greece(96), greenland-scorsbysund(97), greenland-thule(98), grenada(99), guadeloupe(100), guam(101), guatemala(102), guinea-bissau(103), guyana(104), haiti(105), hawaii(106), honduras(107), hong-kong(108), hungary(109), iceland(110), india(111), indonesia-central(112), indonesia-east(113), indonesia-west(114), iran(115), iraq(116), ireland(117), israel(118), italy(119), jamaica(120), japan(121), johnston-islands(122), jordan(123), juan-fernandez-islands(124), kazakhstan(125), kenya(126), kiribati(127), kuwait(128), kyrgyzstan(129), laos(130), latvia(131), lebanon(132), leeward-islands(133), lesotho(134), liberia(135), libya(136), liechtenstein(137), lithuania(138), luxembourg(139), macao(140), macedonia(141), madagascar(142), malawi(143), malaysia(144), maldives(145), mali(146), malta(147), mariana-Islands(148), martinique(149), mauritania(150), mauritius(151), mayotte(152), mexico(153), mexico-baj-n(154), mexico-baj-s(155), midway-islands(156), moldova(157), monaco(158), mongolia(159), montenegro(160), montserrat(161), morocco(162), mozambique(163), namibia(164), nauru(165), nepal(166), the-netherlands-antilles(167), the-netherlands(168), new-caledonia(169), new-hebrides(170), new-zealand(171), new-zealand-chatham-island(172), nicaragua(173), niger(174), nigeria(175), niue-islands(176), norfolk-island(177), north-korea(178), norway(179), oman(180), pakistan(181), palau(182), panama(183), papua-new-guinea(184), paraguay(185), peru(186), philippines(187), pitcairn-island(188), poland(189), portugal-azores(190), portugal-madeira(191), puerto-rico(192), qatar(193), reunion(194), romania(195), russia-moscow(196), russian-fed-zone-1-kaliningrad(197), russian-fed-zone-10-magadan(198), russian-fed-zone-11-petropavlovsk-kamchatsky(199), russian-fed-zone-2-st-petersburg(200), russian-fed-zone-3-izhevsk(201), russian-fed-zone-4-ekaterinburg(202), russian-fed-zone-5-novosibirsk(203), russian-fed-zone-6-krasnojarsk(204), russian-fed-zone-7-irkutsk(205), russian-fed-zone-8-yakatsk(206), russian-fed-zone-9-vladivostok(207), rwanda(208), saint-pierre-and-miquelon(209), san-marino(210), sao-tome-and-principe(211), saudi-arabia(212), senegal(213), serbia(214), the-seychelles(215), sierra-leone(216), singapore(217), slovakia(218), slovenia(219), solomon-islands(220), somalia(221), south-africa(222), south-georgia(223), south-korea(224), spain(225), spain-canary-islands(226), sri-lanka(227), st-helena(228), st-kitts-nevis(229), st-lucia(230), st-vincent-and-the-grenadines(231), sudan(232), suriname(233), swaziland(234), sweden(235), switzerland(236), syria(237), tahiti(238), taiwan(239), tajikistan(240), tanzania(241), thailand(242), togo(243), tonga(244), trinidad-and-tobago(245), tunisia(246), turkey(247), turkmenistan(248), turks-and-caicos-islands(249), tuvalu(250), uganda(251), ukraine(252), ukraine-simferopol(253), united-arab-emirates(254), united-kingdom(255), uruguay(256), us-virgin-islands(257), usa-alaska(258), usa-aleutian-islands(259), usa-arizona(260), usa-central(261), usa-eastern(262), usa-indiana(263), usa-mountain(264), usa-pacific(265), uzbekistan(266), vanuatu(267), vatican-city(268), venezuela(269), vietnam(270), wake-islands(271), wallis-and-futana-islands(272), western-samoa(273), windward-islands(274), yemen(275), zaire-kasai(276), zaire-kinshasa(277), zambia(278), zimbabwe(279), utc(280) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This field indicates the time zone of the system." ::= { timeSettings 2 } ntpClientStatus OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the NTP client is enabled." ::= { timeSettings 3 } customNtpServer OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether custom NTP server is to be used." ::= { timeSettings 4 } ntpAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..119)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates the address or domain name of the NTP server." ::= { timeSettings 5 } -- ********************************************************************** -- * DHCP Server Setting Table -- ********************************************************************** dhcpsSettings OBJECT IDENTIFIER ::= { wax6xx 12 } dhcpServerStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the status of DHCP server. The default value is disable(0)." ::= { dhcpsSettings 1 } dhcpsVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the VLAN ID of DHCP server's VLAN. Default value of DHCP server's VLAN ID is 1." ::= { dhcpsSettings 2 } dhcpsIpStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 3 } dhcpsIpEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 4 } dhcpsNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format." ::= { dhcpsSettings 5 } dhcpsGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 6 } dhcpsPriDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 7 } dhcpsSndDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 8 } dhcpsPriWins OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 9 } dhcpsSndWins OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 10 } dhcpsLeaseTime OBJECT-TYPE SYNTAX INTEGER (2..143999) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes. The default value is 1 day (1440 minutes)." ::= { dhcpsSettings 11 } -- ********************************************************************** -- * AP Scan List -- ********************************************************************** -- ********************************************************************** -- * MAC Access Control Table -- ********************************************************************** accessControlSettings OBJECT IDENTIFIER ::= { wax6xx 16 } wlanAccessControlLocalTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanAccessControlLocalEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "ACL attributes in tablular form to allow for multiple instances on an agent." ::= { accessControlSettings 1 } wlanAccessControlLocalEntry OBJECT-TYPE SYNTAX WlanAccessControlLocalEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the wlanAccessControlLocalTable." INDEX { wlanIndex, aclMAC } ::= { wlanAccessControlLocalTable 1 } WlanAccessControlLocalEntry ::= SEQUENCE { aclMAC MacAddress, aclMacStatus RowStatus } aclMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This field should indicate an MAC address entry in the access control local database." ::= { wlanAccessControlLocalEntry 1 } aclMacStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry" ::= { wlanAccessControlLocalEntry 2 } -- ********************************************************************** -- * Traps -- ********************************************************************** traps OBJECT IDENTIFIER ::= { wax6xx 17 } rogueApDetectionTrap OBJECT IDENTIFIER ::= { traps 1 } rogueApDetectionNotification NOTIFICATION-TYPE OBJECTS { rogueApDetectionMacAddr, rogueApDetectionSsid, rogueApDetectionPrivacy, rogueApDetectionBand, rogueApDetectionChannel, rogueApDetectionRate, rogueApDetectionBeaconInt, rogueApDetectionNumBeacon, rogueApDetectionLastBeacon } STATUS deprecated DESCRIPTION "This trap shall notify detection of an unknown AP." ::= { rogueApDetectionTrap 1 } rogueApDetectionObjects OBJECT IDENTIFIER ::= { rogueApDetectionTrap 2 } rogueApDetectionMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the MAC address of the detected unknown AP." ::= { rogueApDetectionObjects 1 } rogueApDetectionSsid OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the SSID of the detected unknown AP." ::= { rogueApDetectionObjects 2 } rogueApDetectionPrivacy OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the privacy option for the detected unknown AP." ::= { rogueApDetectionObjects 3 } rogueApDetectionBand OBJECT-TYPE SYNTAX INTEGER { band24GHz(0), band5GHz(1) } MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the operating band of the detected unknown AP." ::= { rogueApDetectionObjects 4 } rogueApDetectionChannel OBJECT-TYPE SYNTAX INTEGER { ch1(1),ch2(2),ch3(3),ch4(4), ch5(5),ch6(6),ch7(7), ch8(8),ch9(9),ch10(10),ch11(11), ch12(12),ch13(13),ch14(14), ch34(34),ch36(36),ch38(38), ch40(40),ch42(42),ch44(44), ch46(46),ch48(48),ch52(52), ch56(56),ch60(60),ch64(64), ch100(100),ch104(104),ch108(108), ch112(112),ch116(116),ch120(120), ch124(124),ch128(128), ch132(132),ch136(136), ch140(140),ch149(149), ch153(153),ch157(157), ch161(161),ch165(165),ch169(169) } MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the operating channel of the detected unknown AP." ::= { rogueApDetectionObjects 5 } rogueApDetectionRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the data rate of the detected unknown AP." ::= { rogueApDetectionObjects 6 } rogueApDetectionBeaconInt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the beacon interval of the detected unknown AP." ::= { rogueApDetectionObjects 7 } rogueApDetectionNumBeacon OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the number of beacons sent by the detected unknown AP during the scan interval." ::= { rogueApDetectionObjects 8 } rogueApDetectionLastBeacon OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the time at which last beacon was sent by the detected unknown AP." ::= { rogueApDetectionObjects 9 } maxStationTrap OBJECT IDENTIFIER ::= { traps 2 } maxStationNotification NOTIFICATION-TYPE OBJECTS { maxStationMacAddr, maxStationBand } STATUS deprecated DESCRIPTION "This trap shall notify reaching the max station limit." ::= { maxStationTrap 1 } maxStationObjects OBJECT IDENTIFIER ::= { maxStationTrap 2 } maxStationMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the MAC address of the interface on which max station limit reached." ::= { maxStationObjects 1 } maxStationBand OBJECT-TYPE SYNTAX INTEGER { band24GHz(0), band5GHz(1) } MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the operating band of the interface on which max station limit reached." ::= { maxStationObjects 2 } aclMismatchTrap OBJECT IDENTIFIER ::= { traps 3 } aclMismatchNotification NOTIFICATION-TYPE OBJECTS { aclMismatchMacAddr, aclMismatchBssid, aclMismatchSsid } STATUS deprecated DESCRIPTION "This trap shall notify the denial of a station." ::= { aclMismatchTrap 1 } aclMismatchObjects OBJECT IDENTIFIER ::= { aclMismatchTrap 2 } aclMismatchMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the MAC address of the station which was denied association request due to ACL mismatch." ::= { aclMismatchObjects 1 } aclMismatchBssid OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains BSSID of the VAP on which the station was denied association request due to ACL mismatch." ::= { aclMismatchObjects 2 } aclMismatchSsid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains the SSID of the VAP on which the station was denied association request due to ACL mismatch." ::= { aclMismatchObjects 3 } noBeaconTrap OBJECT IDENTIFIER ::= { traps 4 } noBeaconNotification NOTIFICATION-TYPE OBJECTS { noBeaconBssid } STATUS deprecated DESCRIPTION "This trap shall notify no outgoing beacons." ::= { noBeaconTrap 1 } noBeaconObjects OBJECT IDENTIFIER ::= { noBeaconTrap 2 } noBeaconBssid OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This object contains BSSID of the VAP for which the watch dog timer detected no outgoing beacons." ::= { noBeaconObjects 1 } -- ********************************************************* -- QoS setting table -- ********************************************************* -- ********************************************************************** -- * URL Filter Setting Table -- ********************************************************************** urlfltrSettings OBJECT IDENTIFIER ::= { wax6xx 24 } blockedDomain OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the URL to be blocked." ::= { urlfltrSettings 1 } allowedDomain OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the URL to be unblocked." ::= { urlfltrSettings 2 } blockedHostname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Host Name to be blocked." ::= { urlfltrSettings 3 } allowedHostname OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Host Name to be unblocked." ::= { urlfltrSettings 4 } blockedExpression OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the URL (having specified Expression) to be unblocked." ::= { urlfltrSettings 5 } -- ********************************************************************** -- * Packet Capture Setting Table -- ********************************************************************** packetCaptureSettings OBJECT IDENTIFIER ::= { wax6xx 25 } beaconsCapture OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Status of Beacon Capture. The default value is enable(1)." ::= { packetCaptureSettings 1 } promiscuousCapture OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Status of Promiscuous Capture. The default value is disable(0)." ::= { packetCaptureSettings 2 } clientFltrStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Status of Client Filter. The default value is disable(0)." ::= { packetCaptureSettings 3 } clientFltrMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the MAC Address of the particular Client." ::= { packetCaptureSettings 4 } captureInterface OBJECT-TYPE SYNTAX INTEGER { brtrunk(0), eth0(1), wlan0(2), wlan1(3), radio1(4), radio2(5) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute shall indicate the Packet Capture Interface. The default value is radio1(4)." ::= { packetCaptureSettings 5 } captureDuration OBJECT-TYPE SYNTAX OCTET STRING (SIZE (10..3600)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the Packet Capture duration. The default value is 60." ::= { packetCaptureSettings 6 } captureFileSize OBJECT-TYPE SYNTAX OCTET STRING (SIZE (64..4096)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute indicates the Maximum size of Packet Capture file. The default value is 1024." ::= { packetCaptureSettings 7 } END