Enhancements:

• Upgrade OpenSSL to version 1.1.20
• Add TLS 1.2/1.3 support 
• Support SSH access control session .

Bug Fixes:

• Power Timer Schedule does not work for certain time zones
• Switch does not send SNMP linkUp or linkDown traps 
• Client cannot receive an IP address when using an 802.1Q trunk (GARP) VLAN assigned through a RADIUS server 
• SNMP traps show community string with double quotes
• SSH incorrectly starts again after a reboot regardless of the previous setting  

Security Fixes:

• Addresses security vulnerabilities.

Warnings:

Read and follow these warnings before updating a firmware version that’s prior to 7.0.1.XX:

• We recommend against downgrading the firmware image to 7.0.7.X or earlier version after updating to 7.0.8.4 or later versions.
• Because HTTPS has been disabled by default since v7.0.6.2, the device UI Home page does not display automatically after using HTTPS to update to this firmware version.  Open a new web browser tab and type the switch’s IP address to access the Home page. 
• After HTTPS is enabled manually, accessing device UI via HTTP will be redirected to HTTPS automatically.
• Default community strings “Private” and “Public” for SNMPv1/v2 are not available in newer firmware. Set a different community string before updating the firmware.
• Authentication protocol for SNMPv3 automatically changes to “MD5” if the current setting is “None”.  
• The default setting for the Smart Control Center (SCC) Management option changes from enabled to disabled. Note: The SCC Utility can still discover the switch.

Download Link: https://www.downloads.netgear.com/files/GDC/GS108Tv3/GS108Tv3_GS110TPv3_GS110TPPv1_V7.0.9.9.zip

Firmware Update Instructions:

The released zip file contains the switch firmware and MIB files. Unzip the file to extract the switch image for firmware updating.

To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.