Security Fixes:

• Fixes security vulnerabilities

This firmware addresses security vulnerabilities. For more information about security vulnerabilities, visit https://www.netgear.com/about/security.

Notes:

• SNMP community with public or private community string is removed when you upgrade firmware to v5.0.2.50 or later.

Known issues:

• While a link is up, a port cannot be removed from a VLAN if it is also a member of a LAG.

Workaround: First either remove the link, or remove the port from the LAG.

• After setting the maximum number of allowed static locked MAC address to zero (under Security > Traffic Control > Port Security > Interface Configuration), no static MAC address can be added, even when port security is disabled. 

Workaround:  Change the "Max Allowed Statically Locked MAC" from 0 to 20.

• Can’t successfully remove a policy entry in the table under QoS > Diffserv > Advanced > Policy Configuration the first time.   

Workaround:  Select the same entry and click DELETE again.

Download Link: https://www.downloads.netgear.com/files/GDC/FS728TPv2/FS728TPv2_V5.0.2.52.zip

Firmware Update Instructions:

To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.

The released zip contains the switch firmware (FS728TPv2_5.0.2.51.stk) and MIB files. Unzip the file to extract the switch image for firmware updating.