XSM7224S Firmware version v9.0.0.14

Release 9.0.0.14 Firmware

Bug Fixes:

1. Sometime copper port on the combo port may not come up quick enough after switch rebooted. The startup time now is improved.
2. The SNTP client source port doesn't take effect after it has being reconfigured.
3. The command 'vlan participation all include xxx' on config mode doesn't include all ports in the VLAN actually.
4. Stack port flashing for a while when booting up, then stack members reboot automatically due to timeout.
5. Device view doesn't display switch information correctly.
6. Fails to show master/next/full stack device view.
7. Configured LAG name lost after reloading.
8. Layer3 traffic over a LAG group fails to switch to another member port if shutdown one of the LAG member that carries the traffic.
9. Using GUI to configure Captive Portal, the switch crashed.
10. Fail to enable port security on LAG.
11. Different private group can communicate.
12. XSM7224S provides differen ifName and LLDP Port Id.

Upgrade procedure

1. Always make a backup copy of your current configuration before attempting a firmware upgrade.
   
2. Download the new firmware and store it in a PC. Be sure to note the file's location in the file system.
3. Follow the instructions provided in the user manual to complete the firmware upgrade.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.