New Features and Modifications:

• Revised some wordings on the web GUI for German language setting.

WARNING:

After XS708Ev2 is upgraded to FW version V1.6.0.15 or higher, it cannot work with Plus Utility version prior to V2.7.2.  Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU

Upgarde Procedure:

• Download the new firmware 1.6.0.17 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to get the switch firmware image “XS708Ev2_V1.6.0.17.flash”.

  Download Link: http://www.downloads.netgear.com/files/GDC/XS708Ev2/XS708Ev2_V1.6.0.17.zip

• There are two methods to upgrade the new firmware from PC to the switch.
  1. HTTP
  2. ProSAFE Plus Utility

     Below are the steps to upgrade the firmware via HTTP, which is the most convenient method. For the other method, please check the IG and SW User Manual for details.

• To use HTTP method, go to GUI page “Maintenance > Firmware Upgrade"
• Click the Browse button and locate and select the new firmware image file “XS708Ev2_V1.6.0.17.flash”.
• Click the Apply button.
• When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.

WARNING:

Do not interrupt the network connection or power to the switch, or refresh or close the browser window during this process. Do not disconnect any Ethernet cables or power off the switch until the process is complete.