XAVN2001v2 Firmware Version 0.4.0.7

Bug Fixes / Enhancements:

1. Changed default wireless security to None.
2. Upgraded PLC FW to MAC-QCA7420-v1.1.1-00-X-FINAL. V0406
3. Fixed the specific WOL packets would be blocked by switch issue (Requested by Netgear Roberto).
4. Fixed the WLAN driver would hang issue on HT40 + disable coexistence.
5. Fixed the language update wouldn't be reflected on GUI issue.
6. Replaced virtual_display with label in config_methods to fix Win7 zero-config would show AP-PIN issue.(Suggested by Netgear Lancelot).
7. Fixed the WPS-Client IOT issue with Cisco AP.
8. Added a mechanism to update a generic ART calibration data if the device was factory produced before V0.4.0.5.(Due to the previous produced device¡¦s calibration data was problematic).

Installation Instructions:

• Download and extract the new firmware to a convenient place such as your desktop.
• Log in to the router using a Web browser. The URL is http://www.routerlogin.net.
• Login the XAVN2001 HTTP WEB GUI and upgrade the firmware.
• You can get YOUR XAVN2001 IP address information from powerline utility. This is an example for XAVN2001 IP address.



• Open the IE and input the ip address (or click the wireless icon). You can login the web configuration and upgrade the firmware from firmware upgrade options.
• Please do hardware/software factory reset after you upgrade the firmware > Very important