WNR612v2 Firmware Version 1.0.0.2

Note:

• Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

New Features & Bug Fixes

• Enhance mail notification with SSL support. 
• Enhance DHCP IP acquiring process. 
• Fixes Russia ISP Akado multicast issue caused by incorrect IGMP handshake. 
• Fixes WDS repeater issue – no beacon broadcasting if guest network is enabled, and station can’t be associated with specific AP.   

Known Issues

1. If we press Push Button on two WPS clients and then press Push Button on GUI, WPS process will be completed successfully with one client, but we expect GUI should display error message and WPS process should be failed. 
2. Verify router learns new RIP routes from WAN side RIP router(v1 and v2) (rip_200).
   [DNI RD] Will recognize directed broadcast address 255. 255. 255. 255 into RIPv1/ RIPv2 

To Install

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button below to a convenient place such as your desktop.
3. Log in to the router using a Web broswer. The URL is http://192.168.1.1 ( if you did not change the router’s IP address ).
4. Click Maintenance > Router Upgrade
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step.

Important Note: The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.