Note:

• Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

New Features & Enhancements

• Support WiFi Scheduling.
• Default Language Setting.
• Special dial Function.
• RU Function.

Bug Fixes

• Router starts in English language after reset, no Russian Wizard.
• Router can't switch language to Russian without internet connection. After this operation WEB interface doesn't works.
• DualWAN L2TP/PPTP/PPPoE doesn't works, as result, IPTV via IGMP Proxy doesn't works too.
• Router loses Internet connection after long tome playing IPTV (TV port) or using Torrents.
• IPTV via IGMP Proxy doesn't works with MAC clonig function if MAC of PC and MAC of router the same.
• Port forwarding based on old router spec.
• UPnP doesn't delete unused rules.
• I can't use spaces in names for port forwarding rules.
• Guest Network is enabled, but on status page it has yellow status.
• Authorization timeout works bad. I can click cancel button and refresh page to login to the router.
• Time Zone is not updated, Moscow now is +4, etc.
• WEB interface issues (translation and other).
• NAT Loopback doesn't works.
• Static route by manual configuration doesn't work.
• L2TP connection NEVER succeed.
• IPTV traffic (multicast) from TV-port spamming to LAN port.
• Router gets hanged up while running for 0.5-1.5 hours.
• L2TP MTU default value is 1430 (correct value shall be 1428).
• PPPoE cannot accept null password.
• PPTP cannot establish connection with pap and chap security mode.
• The page cannot skip automatically after fw upgraded with Google Chrome,Safari.
• DUT WAN connection idles time-out function doesn't work.
• 2 issues about IPTV.
• The trust IP should be changed while changing LAN IP's netmask.
• Can't edit Lan Address Reservation if the PC's host name is Chinese.
  

To Install

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button below to a convenient place such as your desktop. Log in to the router using a Web broswer. The URL is http://192.168.1.1 ( if you did not change the router’s IP address ).
3. Click Maintenance > Router Upgrade
4. Click Browse and find the file you just downloaded.
5. Click Upload. Do not interrupt the upgrade while the router does this step.
   Important Note: The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.