Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

Known issues & Bugs:

• Multiple language truncation.
• 20/40 co-existence,When enalbed guest network, 20/40 co-existence can't work.
• When user enables the My mail server requires authentication and the password contains ASCII characters. The router does not send out the log mail.
• Router can detect PPTP mode via CD less or setup wizard.
• When user plug-off and plug-on WAN port Ethernet cable, the WAN port did not send out DHCP REQUEST packet.
• Hairpinning/Port Forwarding, When the externel port and internal port are not the same, the hairpinning function can't work.
• AP mode if enable router as base for WDS function, LAN client can't login router.
• Firmware upgrade alert message translation problem.
• Wireless enabled after restart/power on.
• Transmit power control can't be changed via GUI.
• Correct the LAN 10M LED GPIO definition.

To Upgrade

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

1. Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
2. Download the firmware and save it to a convenient place such as your desktop. Unzip if needed.
3. Log in to the router using a Web browser. The URL is http://www.routerlogin.net.
4. Click Maintenance > Router Upgrade
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step.
   Important Note: The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.