New Features & Enhancements:

• Add Russia certificate request to limit the multicast queue to 50.
• Add Russia certificate request to limit the 11a channels for Russia regulatory to 5150 to 5250.

Bug Fixes:

• Show IPv6 static and dynamic IP addresses in the monitoring page.
• Resolved the DNS resolution issues when AP gets both the IPv6 and IPv4 addresses.
• Modified user accounts Admin rights to change the existing user name, password and privileges.
• Added IPv6 support for trapServerIP and ntpAddr OIDs from SNMP interface.
• Sometimes 5 GHz Radio couldn't be disabled when Wireless ON/OFF feature is enabled.

To Install

1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button below to a convenient place such as your desktop.
3. Login to Web Administration interface of the Access Point -
   By default, http://192.168.0.100 is the Administration URL to the Web GUI. Enter admin for the user name and password for the password.
4. Click Maintenance > Upgrade  > Firmware Upgrade.
5. Click Browse and select the firmware image you just downloaded.
6. Click Upload.
   Do NOT interrupt or power off the computer until the upgrade process is completed. Wait for the AP to reboot.
7. After the access point boots up, log in the access point again.
   You MUST Reset the router to default settings after upgrading the firmware
8. Click Maintenance > Upgrade > Restore Settings.
9. Click Restore. The AP reboots when the Erase operation is done.
10. If you would like to check that the upgrade was successful, log in to the router again at http://192.168.0.100, and check the firmware version.
    

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.