-- ******************************************************************** -- * Wireless LAN Enterprise Access Point Management Base -- ******************************************************************** WNDAP350 DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP FROM SNMPv2-CONF enterprises, IpAddress,Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, Counter32, Counter64, NOTIFICATION-TYPE, TimeTicks FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, MacAddress FROM SNMPv2-TC; -- ******************************************************************** -- * MODULE IDENTITY -- ******************************************************************** wndap350 MODULE-IDENTITY LAST-UPDATED "200708010000Z" -- 08 01, 2007 at 12:00 GMT ORGANIZATION "NETGEAR Inc." CONTACT-INFO "4500 Great America Parkway Santa Clara, California 95054 Phone: (408) 907-8000 Fax: (408) 907-8097 Web Site: http://www.netgear.com" DESCRIPTION "The MIB module for 802.11a/b/g/n Enterprise WiFi AP. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100).accesspoint(7).wndap350(8)" ::= { accesspoint 8 } -- -- Node definitions -- -- The Enterprises Number -- 1.3.6.1.4.1.4526 netgear OBJECT IDENTIFIER ::= { enterprises 4526 } -- 1.3.6.1.4.1.4526.100 productID OBJECT IDENTIFIER ::= { netgear 100 } -- 1.3.6.1.4.1.4526.100.7 accesspoint OBJECT IDENTIFIER ::= { productID 7 } -- Wireless LAN Access Point Identifier -- -- ********************************************************************** -- * MIB attribute OBJECT-TYPE definitions follow -- ********************************************************************** -- ********************************************************************** -- * IP Setting Table -- ********************************************************************** basicSettings OBJECT IDENTIFIER ::= { wndap350 1 } apName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the name of AP. The name is also the NETBIOS name of the AP." ::= { basicSettings 1 } sysMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the MAC Address of the ethernet interface." ::= { basicSettings 2 } sysVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the system firmware version." ::= { basicSettings 3 } sysCountryRegion OBJECT-TYPE SYNTAX INTEGER { unitedStates(840), albania(8), armenia(51), argentina(32), austria(40), australia(5000), azerbaijan(31), belgium(56), bulgaria(100), bahrain(48), brunei(96), bolivia(68), brazil(76), belarus(112), belize(84), canada(5001), switzerland(756), chile(152), china(156), colombia(170), costaRica(188), cyprus(196), czechRepublic(203), germany(276), denmark(208), dominicanRepublic(214), algeria(12), ecuador(218), estonia(233), egypt(818), spain(724), finland(246), france(250), unitedKingdom(826), georgia(268), greece(300), guatemala(320), hongkong(344), honduras(340), croatia(191), hungary(348), indonesia(360), ireland(372), israel(376), india(356), iran(364), iceland(352), italy(380), jordan(400), japan(392), northKorea(408), koreaRepublic(410), kuwait(414), kazakhstan(398), lebanon(422), liechtenstein(438), lithuania(440), luxembourg(442), latvia(428), marocco(504), monaco(492), macedonia(807), macau(446), malta(470), mexico(484), malaysia(458), netherlands(528), norway(578), newZealand(554), oman(512), panama(591), peru(604), philippines(608), pakistan(586), poland(616), puertoRico(630), portugal(620), qatar(634), romania(642), russia(643), saudiArabia(682), sweden(752), singapore(702), slovakRepublic(703), slovenia(705), elSalvador(222), syria(760), thailand(764), tunisia(788), turkey(792), trinidadandTobago(780), taiwan(158), ukraine(804), unitedArabEmirates(784), uruguay(858), uzbekistan(860), venezuela(862), vietnam(704), yemen(887), southAfrica(710), zimbabwe(716), restOfWorld(5100) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the region of operation for which the wireless interface is intended." ::= { basicSettings 4 } adminPasswd OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the administrator password. The AP can be managed from utilities such as ssh, HTTP/HTTPS browser, SNMP management tool and so on." ::= { basicSettings 5 } dhcpClientStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the DHCP client status. DHCP client is disabled by default." ::= { basicSettings 6 } ipAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the static management IP address of the AP." ::= { basicSettings 7 } netmaskAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the static netmask of the management interface." ::= { basicSettings 8 } gatewayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the static gateway IP address for the management interface." ::= { basicSettings 9 } priDnsAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the address that will be used as the first entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set to an IP address in dot format." ::= { basicSettings 10 } sndDnsAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the address that will be used as the second entry in the DNS server list if dhcpClientStatus is disabled. ***The value can only be set to an IP address in dot format." ::= { basicSettings 11 } spanTreeStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the status of Spanning Tree Protocol in the AP. The default value is disable(0)." ::= { basicSettings 12 } managementVlanID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the Management VLAN ID. Default value of management VLAN ID is 1." ::= { basicSettings 13 } networkIntegrityCheck OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the status of internet connection check . AP automatically validates whether the internet connection is active before allowing wireless associations by pinging the default gateway. the default value of this variable is disable(0) ." ::= { basicSettings 14 } untaggedVlanStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the status of untagged VLAN. The untagged VLAN is enabled by default." ::= { basicSettings 15 } untaggedVlanID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the Untagged VLAN ID. Default value of untagged VLAN ID is 1." ::= { basicSettings 16 } sysHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the system hardware version." ::= { basicSettings 17 } sysSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the system serial number." ::= { basicSettings 18 } igmpSnoopingStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the status of IGMP Snooping. The IGMP Snooping is disabled by default." ::= { basicSettings 19 } cloudStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the status of cloud. The cloud status is enabled by default." ::= { basicSettings 20 } -- ********************************************************************** -- * Wireless Settings Table -- ********************************************************************** wlanSettings OBJECT IDENTIFIER ::= { wndap350 2 } wlanSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "wireless interface settings table." ::= { wlanSettings 1 } wlanSettingEntry OBJECT-TYPE SYNTAX WlanSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wlanSettingTable. Each wlanSettingEntry represents a wireless profile (2.4GHz band or 5GHz band). On a single radio device, the same wireless interface can be assigned 2.4GHz profile or 5GHz profile. On a dual radio device, one of the wireless interfaces is assigned with 2.4GHz profile and the other wireless interface takes up 5GHz profile." INDEX { wlanIndex } ::= { wlanSettingTable 1 } WlanSettingEntry ::= SEQUENCE { wlanIndex INTEGER, operateMode INTEGER, radioStatus INTEGER, channel INTEGER, dataRate INTEGER, wmmSupport INTEGER, beaconInterval INTEGER, rtsThreshold INTEGER, fragLength INTEGER, dtimInterval INTEGER, preambleType INTEGER, txPower INTEGER, accessControlMode INTEGER, rogueApDetection INTEGER, mcsRate INTEGER, guardInterval INTEGER, channelWidth INTEGER, ampduAggrLength INTEGER, ampdu INTEGER, rifsTransmission INTEGER, apMode INTEGER, uapsdStatus INTEGER, clientIsolation INTEGER, maxClientAssociations INTEGER, rogueApDetectionPolicy INTEGER } wlanIndex OBJECT-TYPE SYNTAX INTEGER { band2dot4GHz(24), band5GHz(50) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies one of the 2 wireless profiles." ::= { wlanSettingEntry 1 } operateMode OBJECT-TYPE SYNTAX INTEGER { dot11b(0), dot11bg(1), dot11ng(2), dot11a(3), dot11na(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the desired wireless operating mode. The option are: dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11bg - Both 802.11b and 802.11g wireless stations can be used. dot11ng - All 802.11b, 802.11g and 802.11ng wireless stations can be used. dot11a - Only 802.11a wireless stations can be used. dot11na - All 802.11a and 802.11na wireless stations can be used. The default value is dot11ng(2)." ::= { wlanSettingEntry 2 } radioStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the status of radio. The default value is enable(1)." ::= { wlanSettingEntry 3 } channel OBJECT-TYPE SYNTAX INTEGER { auto(0), ch1(1),ch2(2),ch3(3),ch4(4), ch5(5),ch6(6),ch7(7), ch8(8),ch9(9),ch10(10),ch11(11), ch12(12),ch13(13),ch14(14), ch34(34),ch36(36),ch38(38), ch40(40),ch42(42),ch44(44), ch46(46),ch48(48),ch52(52), ch56(56),ch60(60),ch64(64), ch100(100),ch104(104),ch108(108), ch112(112),ch116(116),ch120(120), ch124(124),ch128(128), ch132(132),ch136(136), ch140(140),ch149(149), ch153(153),ch157(157), ch161(161),ch165(165) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the channel number to be used. The default value is auto(0)." ::= { wlanSettingEntry 4 } dataRate OBJECT-TYPE SYNTAX INTEGER { best(0), rate1Mbps(2), rate2Mbps(4), rate5dot5Mbps(11), rate6Mbps(12), rate9Mbps(18), rate11Mbps(22), rate12Mbps(24), rate18Mbps(36), rate24Mbps(48), rate36Mbps(72), rate48Mbps(96), rate54Mbps(108) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the transmit rate applicable to 802.11b, 802.11bg and 802.11a modes. When the operateMode is: dot11b(0) - can set to 0:best, 2:1Mb/s, 4:2Mb/s, 11:5.5Mb/s, and 22:11 Mb/s. dot11bg(1) - can set to 0:best, 2:1Mb/s, 4:2Mb/s, 11:5.5Mb/s, 22:11 Mb/s, 12:6Mb/s, 18:9Mb/s, 24:12Mb/s, 36:18Mb/s, 48:24Mb/s, 72:36Mb/s, 96:48Mb/s, and 108:54Mb/s. dot11a(3) - can set to 0:best, 12:6Mb/s, 18:9Mb/s, 24:12Mb/s, 36:18Mb/s, 48:24Mb/s, 72:36Mb/s, 96:48Mb/s and 108:54Mb/s. The default value is best(0)." ::= { wlanSettingEntry 5 } wmmSupport OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the status of WMM(Wireless Multimedia) suport. The default value is enable(1)." ::= { wlanSettingEntry 6 } beaconInterval OBJECT-TYPE SYNTAX INTEGER (100..1000) UNITS "1024 microsecond" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the Beacon Interval. The default value is 100." ::= { wlanSettingEntry 7 } rtsThreshold OBJECT-TYPE SYNTAX INTEGER (0..2347) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the RTS threshold. The default value is 2347." ::= { wlanSettingEntry 8 } fragLength OBJECT-TYPE SYNTAX INTEGER (256..2346) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the fragmentation threshold. The default value is 2346." ::= { wlanSettingEntry 9 } dtimInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the beacon delivery traffic indication message period in multiples of beaconInterval. The default value is 3." ::= { wlanSettingEntry 10 } preambleType OBJECT-TYPE SYNTAX INTEGER { auto(0), long(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b, 802.11bg and 802.11ng modes. When set to auto(0), depending on the station type, AP selects short or long preamble. The default value is auto(0)." ::= { wlanSettingEntry 11 } txPower OBJECT-TYPE SYNTAX INTEGER { full(0), half(1), quarter(2), eighth(3), min(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the transmit power. The default value is full(0)." ::= { wlanSettingEntry 12 } accessControlMode OBJECT-TYPE SYNTAX INTEGER { disable(0), local(1), server(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates whether the access control list is enabled and the source of the database of the access control list." ::= { wlanSettingEntry 13 } rogueApDetection OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the status of Rogue AP detection. The default value is disable(0)." ::= { wlanSettingEntry 14 } mcsRate OBJECT-TYPE SYNTAX INTEGER { mcs0(0), mcs1(1), mcs2(2), mcs3(3), mcs4(4), mcs5(5), mcs6(6), mcs7(7), mcs8(8), mcs9(9), mcs10(10), mcs11(11), mcs12(12), mcs13(13), mcs14(14), mcs15(15), best(99) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the transmit rate to be used in case of 11na and 11ng modes. Rate index of 0 means 15 Mbps when the channel width is 40Mhz or dynamic-20/40 and 7.2 Mbps when the channel width is 20Mhz. Every rate index n above 0 is (n+1)*mcsRate0. ex. mcsRate1 = 2*mcsRate0. Default value is set to best" ::= { wlanSettingEntry 15 } guardInterval OBJECT-TYPE SYNTAX INTEGER { auto(0), long(800) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the guard interval. When set to auto(0), depending on the station type, AP selects 400ns or 800ns guard interval. The default value is auto(0)." ::= { wlanSettingEntry 16 } channelWidth OBJECT-TYPE SYNTAX INTEGER { static20Mhz(0), static40Mhz(1), dynamic20-40(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall set the CWM mode to 20Mhz or 40Mhz or automatically switches between 20 and 40 based on channel conditions. For 11ng mode, the default value is static20Mhz(0), when the channel is auto. For 11na mode, the default value is dynamic20-40(2), when the channel is auto." ::= { wlanSettingEntry 17 } ampdu OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall enable or disable AMPDU aggregation. It is enabled by default." ::= { wlanSettingEntry 18 } ampduAggrLength OBJECT-TYPE SYNTAX INTEGER (1024..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall set the AMPDU aggregation length. The default value is 65535." ::= { wlanSettingEntry 19 } rifsTransmission OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute sets the status of rifsTransmission. The default value of the attribute is disable(0)." ::= { wlanSettingEntry 20 } apMode OBJECT-TYPE SYNTAX INTEGER { ap(0), p2p(1), p2p-ap(2), p2mp-ap(3), p2mp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the device operation mode. ap: device operates as an Access Point p2p: device operates as a point-to-point wireless bridge No STA are associated to the device in this mode p2p_ap: device operates as a point-to-point wireless bridge Wireless STA can be associated to the device in this mode p2mp-ap: device operates as a point-to-multipoint wireless bridge Wireless STA can be associated to the device in this mode p2mp: device operates as a point-to-multipoint wireless bridge No STA are associated to the device in this mode" ::= { wlanSettingEntry 21 } uapsdStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether wmm power save. The default value is enable(1) ." ::= { wlanSettingEntry 22 } maxClientAssociations OBJECT-TYPE SYNTAX INTEGER(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited" ::= { wlanSettingEntry 23 } rogueApDetectionPolicy OBJECT-TYPE SYNTAX INTEGER { mild(10), moderate(5), aggressive(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP. If it is 'mild' set it to 10sec,'moderate' should be 5sec and aggressive will be 1 sec. The default value is moderate(5)." ::= { wlanSettingEntry 24 } clientIsolation OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether wireless clients in a BSS can communicate with each other. The default value of this attribute is disable(0)." ::= { wlanSettingEntry 25 } -- ********************************************************* -- VAP setting table -- ********************************************************* vapSettings OBJECT IDENTIFIER ::= { wndap350 3 } vapSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF VapSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VAP attributes setting table." ::= { vapSettings 1 } vapSettingEntry OBJECT-TYPE SYNTAX VapSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VAP attributes setting table entry." INDEX { wlanIndex, vapIndex } ::= { vapSettingTable 1 } VapSettingEntry ::= SEQUENCE { vapIndex INTEGER, vapProfileName OCTET STRING, vapProfileStatus INTEGER, ssid OCTET STRING, hideNetworkName INTEGER, dynamicVlan INTEGER, vlanID INTEGER, accessControl INTEGER, accessControlPolicy INTEGER, clientSecuritySeperation INTEGER, authenticationType INTEGER, encryption INTEGER, presharedKey OCTET STRING, wepKeyType INTEGER, wepKeyNo INTEGER, wepKey1 OCTET STRING, wepKey2 OCTET STRING, wepKey3 OCTET STRING, wepKey4 OCTET STRING, wepPassPhrase OCTET STRING } vapIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies one of the 8 VAP profiles." ::= { vapSettingEntry 1 } vapProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of this VAP profile." ::= { vapSettingEntry 2 } vapProfileStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the status of this VAP profile." ::= { vapSettingEntry 3 } ssid OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate SSID.Its length can't be larger than 32 ." ::= { vapSettingEntry 4 } hideNetworkName OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether to broadcast wireless network Name (SSID). The default value of this attribute is disable(0)." ::= { vapSettingEntry 5 } dynamicVlan OBJECT-TYPE SYNTAX INTEGER { disable(0), optional(1), required(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the vlan Type disable(0) : when disable vlan type is static. optional(1) : dynamic vlan is enabled but if radius server do not return vlanId still allow station to connect. required(2) : dynamic vlan is enabled but if radius server do not return vlanId then do not allow station to connect." ::= { vapSettingEntry 6 } vlanID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the VLAN ID of the VAP. " ::= { vapSettingEntry 7 } accessControl OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the policy to define whether to connect the STA to default configured VLAN or just send disconnect to the STA if the vlan id returned from the Radius server does not match with the one statically configured on the vap." ::= { vapSettingEntry 8 } accessControlPolicy OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether wireless clients in a BSS can communicate with each other. The default value of this attribute is disable(0)." ::= { vapSettingEntry 9 } clientSecuritySeperation OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate whether wireless clients in a BSS can communicate with each other. The default value of this attribute is disable(0)." ::= { vapSettingEntry 10 } authenticationType OBJECT-TYPE SYNTAX INTEGER { open(0), shared(1), legacy802dot1x(2), wpa(4), wpa2(8), wpaORwpa2(12), wpapsk(16), wpa2psk(32), wpapskORwpa2psk(48) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates how to authenticate the station." ::= { vapSettingEntry 11 } encryption OBJECT-TYPE SYNTAX INTEGER { none(0), wep(1), tkip(2), aes(4), tkipORaes(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates how to encrypt the packets sent to a station." ::= { vapSettingEntry 12 } presharedKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate preshared key used in the following authenticationtype: wpapsk(16), wpa2psk(32), wpapskORwpa2psk(48)." ::= { vapSettingEntry 13 } wepKeyType OBJECT-TYPE SYNTAX INTEGER { hex64(64), hex128(128), hex152(152) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field shall indicate the type of WEP key." ::= { vapSettingEntry 14 } wepKeyNo OBJECT-TYPE SYNTAX INTEGER { wepKey1(1), wepKey2(2), wepKey3(3), wepKey4(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the number of default wep key." ::= { vapSettingEntry 15 } wepKey1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the key value of the first default wep key." ::= { vapSettingEntry 16 } wepKey2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the key value of the second default wep key." ::= { vapSettingEntry 17 } wepKey3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the key value of the third default wep key." ::= { vapSettingEntry 18 } wepKey4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the key value of the fourth default wep key." ::= { vapSettingEntry 19 } wepPassPhrase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate WEP pass phrase, used to generate four WEP keys." ::= { vapSettingEntry 20 } -- ********************************************************* -- WDS settings -- ********************************************************* wdsSettings OBJECT IDENTIFIER ::= { wndap350 4 } wdsSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF WdsSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WDS attributes in tablular form to allow for multiple instances of wds setting profile." ::= { wdsSettings 1 } wdsSettingEntry OBJECT-TYPE SYNTAX WdsSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wdsTable." INDEX { wlanIndex, wdsIndex } ::= { wdsSettingTable 1 } WdsSettingEntry ::= SEQUENCE { wdsIndex INTEGER, wdsProfileName OCTET STRING, wdsProfileStatus INTEGER, remoteMacAddress MacAddress, wdsAuthenticationtype INTEGER, wdsEncryption INTEGER, wdsPresharedKey OCTET STRING, wdsWepKeyType INTEGER, wdsWepKey OCTET STRING, wdsWepPassPhrase OCTET STRING } wdsIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies one of the 4 wireless bridge profiles." ::= { wdsSettingEntry 1 } wdsProfileName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the wireless bridge profile." ::= { wdsSettingEntry 2 } wdsProfileStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the status of this wireless bridge profile." ::= { wdsSettingEntry 3 } remoteMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the link partner's MAC address." ::= { wdsSettingEntry 4 } wdsAuthenticationtype OBJECT-TYPE SYNTAX INTEGER { open(0), wpapsk(2), wpa2psk(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates how to authenticate the link partner." ::= { wdsSettingEntry 5 } wdsEncryption OBJECT-TYPE SYNTAX INTEGER { none(0), wep(1), tkip(2), aes(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates how to encrypt the packets sent to link partner." ::= { wdsSettingEntry 6 } wdsPresharedKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate preshared key used by wpapsk or wpa2psk." ::= { wdsSettingEntry 7 } wdsWepKeyType OBJECT-TYPE SYNTAX INTEGER { hex64(64), hex128(128), hex152(152) } MAX-ACCESS read-write STATUS current DESCRIPTION "The field shall indicate the type of WEP key." ::= { wdsSettingEntry 8 } wdsWepKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the value of the WEP key." ::= { wdsSettingEntry 9 } wdsWepPassPhrase OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..39)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate WEP pass phrase, used to generate the WEP key." ::= { wdsSettingEntry 10 } -- ********************************************************* -- WMM settings -- ********************************************************* wmmSettings OBJECT IDENTIFIER ::= { wndap350 5 } wmmApEdcaSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF WmmApEdcaSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WMM settings for AP EDCA." ::= { wmmSettings 1 } wmmApEdcaSettingEntry OBJECT-TYPE SYNTAX WmmApEdcaSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "AP Enhanced Distribution Channel Access Parameters " INDEX { wlanIndex, wmmApEdcaQIndex } ::= { wmmApEdcaSettingTable 1 } WmmApEdcaSettingEntry ::= SEQUENCE { wmmApEdcaQIndex INTEGER, wmmApEdcaQName OCTET STRING, wmmApEdcaAifs INTEGER, wmmApEdcaCwMin INTEGER, wmmApEdcaCwMax INTEGER, wmmApEdcaMaxBurst INTEGER } wmmApEdcaQIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies one of the 4 AP EDCA queues. 1: AC_BE 2: AC_BK 3: AC_VI 4: AC_VO" ::= { wmmApEdcaSettingEntry 1 } wmmApEdcaQName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (5)) MAX-ACCESS read-only STATUS current DESCRIPTION "Queues are defined for different types of data (video or voice or data) transmitted from AP to station. AC_BE (best effort) IP data is sent to this queue. AC_BK (Background) Bulk data that requires maximum throughput and is not time-sensitive is sent to this queue (example - FTP data). AC_VI (Video) Video data is sent to this queue. AC_VO (Voice) VoIP and streaming media are sent to this queue." ::= { wmmApEdcaSettingEntry 2 } wmmApEdcaAifs OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The Arbitration Inter-Frame Spacing (AIFS) specifies the wait time (in microseconds) for data frames. 0: 0us 1: 32us 2: 64us 3: 96us 4: 128us 5: 160us 6: 192us 7: 224us 8: 255us" ::= { wmmApEdcaSettingEntry 3 } wmmApEdcaCwMin OBJECT-TYPE SYNTAX INTEGER (0 | 1 | 3 | 7 | 15 | 31 | 63 | 127 | 255 | 511 | 1023) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is input to the algorithm that determines the initial random backoff wait time ('window') for retry of a transmission. The value specified here in the Minimum Contention Window is the upper limit (in microseconds) of a range from which the initial random backoff wait time is determined." ::= { wmmApEdcaSettingEntry 4 } wmmApEdcaCwMax OBJECT-TYPE SYNTAX INTEGER (0 | 1 | 3 | 7 | 15 | 31 | 63 | 127 | 255 | 511 | 1023) MAX-ACCESS read-write STATUS current DESCRIPTION "The value specified here in the Maximum Contention Window is the upper limit (in microseconds) for the doubling of the random backoff value. This doubling continues until either the data frame is sent or the Maximum Contention Window size is reached. Once the Maximum Contention Window size is reached, retries will continue until a maximum number of retries allowed is reached. The value for cwmax must be higher than the value for cwmin." ::= { wmmApEdcaSettingEntry 5 } wmmApEdcaMaxBurst OBJECT-TYPE SYNTAX INTEGER (0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "This value specifies (in microseconds) the Maximum Burst Length allowed for packet bursts on the wireless network. A packet burst is a collection of multiple frames transmitted without header information. The decreased overhead results in higher throughput and better performance." ::= { wmmApEdcaSettingEntry 6 } wmmStaEdcaSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF WmmStaEdcaSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "WMM settings for STA EDCA." ::= { wmmSettings 2 } wmmStaEdcaSettingEntry OBJECT-TYPE SYNTAX WmmStaEdcaSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Station Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the client station to the access point" INDEX { wlanIndex, wmmStaEdcaQIndex } ::= { wmmStaEdcaSettingTable 1 } WmmStaEdcaSettingEntry ::= SEQUENCE { wmmStaEdcaQIndex INTEGER, wmmStaEdcaQName OCTET STRING, wmmStaEdcaAifs INTEGER, wmmStaEdcaCwMin INTEGER, wmmStaEdcaCwMax INTEGER, wmmStaEdcaTxopLimit INTEGER } wmmStaEdcaQIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies one of the 4 STA EDCA Queues. 1: AC_BE 2: AC_BK 3: AC_VI 4: AC_VO" ::= { wmmStaEdcaSettingEntry 1 } wmmStaEdcaQName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (5)) MAX-ACCESS read-only STATUS current DESCRIPTION "Queues are defined for different types of data (video or voice or data) transmitted from station-to-AP. AC_BE (best effort) IP data is sent to this queue. AC_BK (Background) Bulk data that requires maximum throughput and is not time-sensitive is sent to this queue (example - FTP data). AC_VI (Video) Video data is sent to this queue. AC_VO (Voice) VoIP and streaming media are sent to this queue." ::= { wmmStaEdcaSettingEntry 2 } wmmStaEdcaAifs OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The Arbitration Inter-Frame Spacing (AIFS) specifies the wait time (in microseconds) for data frames. 0: 0us 1: 32us 2: 64us 3: 96us 4: 128us 5: 160us 6: 192us 7: 224us 8: 255us" ::= { wmmStaEdcaSettingEntry 3 } wmmStaEdcaCwMin OBJECT-TYPE SYNTAX INTEGER (0 | 1 | 3 | 7 | 15 | 31 | 63 | 127 | 255 | 511 | 1023) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is input to the algorithm that determines the initial random backoff wait time ('window') for retry of a transmission. The value specified here in the Minimum Contention Window is the upper limit (in microseconds) of a range from which the initial random backoff wait time is determined. The first random number generated will be a number between 0 and the number specified here. " ::= { wmmStaEdcaSettingEntry 4 } wmmStaEdcaCwMax OBJECT-TYPE SYNTAX INTEGER (0 | 1 | 3 | 7 | 15 | 31 | 63 | 127 | 255 | 511 | 1023) MAX-ACCESS read-write STATUS current DESCRIPTION "The value specified here in the Maximum Contention Window is the upper limit (in microseconds) for the doubling of the random backoff value. This doubling continues until either the data frame is sent or the Maximum Contention Window size is reached. Once the Maximum Contention Window size is reached, retries will continue until a maximum number of retries allowed is reached." ::= { wmmStaEdcaSettingEntry 5 } wmmStaEdcaTxopLimit OBJECT-TYPE SYNTAX INTEGER (0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "The Transmission Opportunity (TXOP) is an interval of time when a WMM client station has the right to initiate transmissions onto the wireless medium (WM). This value specifies (in microseconds) the Transmission Opportunity (TXOP) for client stations; that is, the interval of time when a WMM client station has the right to initiate transmissions on the wireless network." ::= { wmmStaEdcaSettingEntry 6 } -- ********************************************************* -- Remote Settings Information -- ********************************************************* remoteSettings OBJECT IDENTIFIER ::= { wndap350 6 } inactivityTimeOut OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the session inactivity time after which the session will be terminated. This is applicable to Telnet, SSH and HTTP sessions. Default value is 300 seconds." ::= { remoteSettings 1 } sshStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the SSH daemon status. The default value is enable(1)." ::= { remoteSettings 2 } telnetStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the telnet daemon status. The default value is enable(1)." ::= { remoteSettings 3 } snmpStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the SNMP agent status. The default value is enable(1)." ::= { remoteSettings 4 } trapServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the trap server IP address." ::= { remoteSettings 5 } trapPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the trap port. The default value of this variable is 162." ::= { remoteSettings 6 } trapServerCommunity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the community name for traps." ::= { remoteSettings 7 } readOnlyCommunity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string." ::= { remoteSettings 8 } readWriteCommunity OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string." ::= { remoteSettings 9 } -- *********************************************************************** -- * Statistic -- *********************************************************************** statistic OBJECT IDENTIFIER ::= { wndap350 7 } wiredEthernetStat OBJECT IDENTIFIER ::= { statistic 1 } lanRecvPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of received packets." ::= { wiredEthernetStat 1 } lanTransPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of transmitted packets." ::= { wiredEthernetStat 2 } lanRecvBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of received bytes." ::= { wiredEthernetStat 3 } lanTransBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of transmitted bytes." ::= { wiredEthernetStat 4 } lanRecvPayloadBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the ethernet bytes received excluding to the ap." ::= { wiredEthernetStat 5 } lanTransPayloadBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the ethernet bytes received excluding from the ap." ::= { wiredEthernetStat 6 } lanPacketErrorRateTotal OBJECT-TYPE SYNTAX INTEGER(1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the received error ethernet packets rate" ::= { wiredEthernetStat 7 } lanWrongPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of wrong Ethernet packets." ::= { wiredEthernetStat 8 } -- Wireless Stat Table wirelessStatTable OBJECT-TYPE SYNTAX SEQUENCE OF WirelessStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wireless interface statistics table." ::= { statistic 2 } wirelessStatEntry OBJECT-TYPE SYNTAX WirelessStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Wireless interface statistics." INDEX { wlanIndex } ::= { wirelessStatTable 1 } WirelessStatEntry ::= SEQUENCE { wlanRecvUnicastPacket Unsigned32, wlanTransUnicastPacket Unsigned32, wlanRecvBroadcastPacket Unsigned32, wlanTransBroadcastPacket Unsigned32, wlanRecvMulticastPacket Unsigned32, wlanTransMulticastPacket Unsigned32, wlanRecvPacket Unsigned32, wlanTransPacket Unsigned32, wlanRecvBytes Unsigned32, wlanTransBytes Unsigned32, wlanWrongSTAPackets Unsigned32 } wlanRecvUnicastPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of received unicast packets." ::= { wirelessStatEntry 1 } wlanTransUnicastPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of transmitted unicast packets." ::= { wirelessStatEntry 2 } wlanRecvBroadcastPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of received broadcast packets." ::= { wirelessStatEntry 3 } wlanTransBroadcastPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of transmitted broadcast packets." ::= { wirelessStatEntry 4 } wlanRecvMulticastPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of received multicast packets." ::= { wirelessStatEntry 5 } wlanTransMulticastPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of transmitted multicast packets." ::= { wirelessStatEntry 6 } wlanRecvPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of received packets." ::= { wirelessStatEntry 7 } wlanTransPacket OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of transmitted packets." ::= { wirelessStatEntry 8 } wlanRecvBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of received bytes." ::= { wirelessStatEntry 9 } wlanTransBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of transmitted bytes." ::= { wirelessStatEntry 10 } wlanWrongSTAPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of wlan wrong station packets." ::= { wirelessStatEntry 11 } -- Host Resource Stats hostResourceStat OBJECT IDENTIFIER ::= { statistic 3 } hrSysCpuUtilizationRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the percentage of cpu Utilization Rate ." ::= { hostResourceStat 1 } hrSysWlanUtilizationRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the wlan Utilization Rate based on calculating station access Time." ::= { hostResourceStat 2 } hrSysTotalMemorySize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total memory size of the system in kiloBytes." ::= { hostResourceStat 3 } hrSysFreeMemorySize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the current free memory size of the system in kiloBytes." ::= { hostResourceStat 4 } hrSysUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the time (in hundredths of a second) since the system(Ap) was last re-initialized." ::= { hostResourceStat 5 } hrSysIdleTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the time (in hundredths of a second) the system has spent idle." ::= { hostResourceStat 6 } -- Radio/wlan Status Table radioStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RadioStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of virtual access point in a tabular form." ::= { statistic 4 } radioStatusEntry OBJECT-TYPE SYNTAX RadioStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the radioStatusTable." INDEX { wlanIndex } ::= { radioStatusTable 1 } RadioStatusEntry ::= SEQUENCE { numberOfStations INTEGER, wlanRxPacketsTotal Unsigned32, wlanRxBytesTotal Counter64, wlanTxPacketsTotal Unsigned32, wlanTxBytesTotal Counter64, wlanDiscardPacketsTotal Unsigned32, wlanTxPacketFailTotal Unsigned32, wlanTxRetryTotal Unsigned32, wlanFcsFailCntTotal Unsigned32, wlanRtsFailCntTotal Unsigned32, wlanAckFailCntTotal Unsigned32, wlanCrcErrorTotal Unsigned32, wlanPhyErrorTotal Unsigned32, wlanMicErrorTotal Unsigned32, wlanKeyErrorTotal Unsigned32, wlanTxFifoErrorTotal Unsigned32, wlanRxFifoErrorTotal Unsigned32, wlanTxPayloadBytesTotal Unsigned32, wlanRxPayloadBytesTotal Unsigned32, wlanPacketErrorRateTotal INTEGER, wlanAuthRequestTotal INTEGER, wlanAuthResponseTotal Unsigned32, wlanSuccessConnectTotal Unsigned32, wlanAbnormalDisconnectTotal Unsigned32, wlanNormalDisconnectTotal Unsigned32 } numberOfStations OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This field indicates number of stations associated with wlan ." ::= { radioStatusEntry 1 } wlanRxPacketsTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets received." ::= { radioStatusEntry 2 } wlanRxBytesTotal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the bytes received." ::= { radioStatusEntry 3 } wlanTxPacketsTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets sent." ::= { radioStatusEntry 4 } wlanTxBytesTotal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the bytes sent." ::= { radioStatusEntry 5 } wlanDiscardPacketsTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets discard." ::= { radioStatusEntry 6 } wlanTxPacketFailTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets which failed to send." ::= { radioStatusEntry 7 } wlanTxRetryTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets which retry to send." ::= { radioStatusEntry 8 } wlanFcsFailCntTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets receved which FCS is error." ::= { radioStatusEntry 9 } wlanRtsFailCntTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets receved which RTS is error." ::= { radioStatusEntry 10 } wlanAckFailCntTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets receved which ACK is error." ::= { radioStatusEntry 11 } wlanCrcErrorTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets receved which CRC is error." ::= { radioStatusEntry 12 } wlanPhyErrorTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets receved which PHY is error." ::= { radioStatusEntry 13 } wlanMicErrorTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets receved which MIC is error." ::= { radioStatusEntry 14 } wlanKeyErrorTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets receved which KEY is error." ::= { radioStatusEntry 15 } wlanTxFifoErrorTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets transmit which FIFO is error." ::= { radioStatusEntry 16 } wlanRxFifoErrorTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the packets recieved which FIFO is error." ::= { radioStatusEntry 17 } wlanTxPayloadBytesTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the wlan packets sent excluding from the ap." ::= { radioStatusEntry 18 } wlanRxPayloadBytesTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the wlan packets received excluding to the ap." ::= { radioStatusEntry 19 } wlanPacketErrorRateTotal OBJECT-TYPE SYNTAX INTEGER(1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the received error wlan packets rate." ::= { radioStatusEntry 20 } wlanAuthRequestTotal OBJECT-TYPE SYNTAX INTEGER(1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the authentiacation request from the station." ::= { radioStatusEntry 21 } wlanAuthResponseTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the authentiacation response to the station." ::= { radioStatusEntry 22 } wlanSuccessConnectTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the successful connection ." ::= { radioStatusEntry 23 } wlanAbnormalDisconnectTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The filed indicates the total sum of the abnormal disconnect." ::= { radioStatusEntry 24 } wlanNormalDisconnectTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The filed indicates the total sum of the normal disconnect." ::= { radioStatusEntry 25 } -- Vap Status Table. Displays all attributes corresponding to each vap. vapStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VapStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of virtual access point in a tabular form." ::= { statistic 5 } vapStatusEntry OBJECT-TYPE SYNTAX VapStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vapStatusTable." INDEX { wlanIndex , vapStatIndex } ::= { vapStatusTable 1 } VapStatusEntry ::= SEQUENCE { vapStatIndex INTEGER, txByteCount Counter32, txFrameCount Counter32, rxByteCount Counter32, rxFrameCount Counter32, txPayloadBytes Counter32, rxPayloadBytes Counter32, numberOfClients INTEGER, clientsAuthRequestTotal INTEGER, clientsAuthResponseTotal Unsigned32, clientsSuccessConnectTotal Unsigned32, clientsAbnormalDisconnectTotal Unsigned32, clientsNormalDisconnectTotal Unsigned32 } vapStatIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies one of the 8 VAP profiles." ::= { vapStatusEntry 1 } txByteCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate transmitted bytes by the VAP ." ::= { vapStatusEntry 2 } txFrameCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate transmitted frames by the VAP ." ::= { vapStatusEntry 3 } rxByteCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the recieved bytes by the VAP ." ::= { vapStatusEntry 4 } rxFrameCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the recieved bytes by the VAP ." ::= { vapStatusEntry 5 } txPayloadBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of send bytes excluding from the ap." ::= { vapStatusEntry 6 } rxPayloadBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "the field indicates the sum of received bytes excluding to the ap." ::= { vapStatusEntry 7 } numberOfClients OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate number of clients associated with VAP ." ::= { vapStatusEntry 8 } clientsAuthRequestTotal OBJECT-TYPE SYNTAX INTEGER(1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the authentiacation request from the station." ::= { vapStatusEntry 9 } clientsAuthResponseTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the authentiacation response to the station." ::= { vapStatusEntry 10 } clientsSuccessConnectTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The field indicates the total sum of the successful connection ." ::= { vapStatusEntry 11 } clientsAbnormalDisconnectTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The filed indicates the total sum of the abnormal disconnect." ::= { vapStatusEntry 12 } clientsNormalDisconnectTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The filed indicates the total sum of the normal disconnect." ::= { vapStatusEntry 13 } -- ********************************************************************** -- * Station List Table -- ********************************************************************** stationList OBJECT IDENTIFIER ::= { wndap350 8 } -- wlan0StationList Table wlan0StationListTable OBJECT-TYPE SYNTAX SEQUENCE OF Wlan0StationListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of associated stations in a tabular form." ::= { stationList 1 } wlan0StationListEntry OBJECT-TYPE SYNTAX Wlan0StationListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the stationListTable." INDEX { wlanIndex , wlan0macAddress } ::= { wlan0StationListTable 1 } Wlan0StationListEntry ::= SEQUENCE { wlan0macAddress MacAddress, wlan0clientIpaddr IpAddress, wlan0associationTime DisplayString, wlan0clientWirelessMode INTEGER, wlan0associatedSsid DisplayString, wlan0associatedBssid MacAddress, wlan0associatedSNR INTEGER, wlan0clientChannelWidth INTEGER, wlan0stationStatus INTEGER, wlan0stationRssi INTEGER, wlan0idleTime INTEGER, wlan0stationChannel INTEGER, wlan0txDataRate DisplayString, wlan0rxDataRate DisplayString, wlan0stationState DisplayString, wlan0stationAuthenticationType INTEGER, wlan0stationAID INTEGER, wlan0stationTxSeq INTEGER, wlan0stationRxSeq INTEGER, wlan0stationCapability DisplayString, wlan0stationCipher DisplayString, wlan0stationRecvPayloadBytes INTEGER, wlan0stationTransPayloadBytes INTEGER } wlan0macAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate MAC address of the associated stationID." ::= { wlan0StationListEntry 1 } wlan0clientIpaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate IP address of the associated stationID." ::= { wlan0StationListEntry 2 } wlan0associationTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate ssid of the VAP to which the station is associated." ::= { wlan0StationListEntry 3 } wlan0clientWirelessMode OBJECT-TYPE SYNTAX INTEGER { dot11b(0), dot11bg(1), dot11ng(2), dot11a(3), dot11na(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the wireless mode of the associated stationID." ::= { wlan0StationListEntry 4 } wlan0associatedSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate ssid of the VAP to which the station is associated." ::= { wlan0StationListEntry 5 } wlan0associatedBssid OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate bssid of the VAP to which the station is associated." ::= { wlan0StationListEntry 6 } wlan0associatedSNR OBJECT-TYPE SYNTAX INTEGER UNITS "0.25dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the noise margin of Ap with respect to the its recieved signal from station." ::= { wlan0StationListEntry 7 } wlan0clientChannelWidth OBJECT-TYPE SYNTAX INTEGER { none(0), static20MHz(1), static40MHz(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the channel width for the associated station in 11n mode. Not applicable for a station in 11a/b/g mode." ::= { wlan0StationListEntry 8 } wlan0stationStatus OBJECT-TYPE SYNTAX INTEGER { none(0), authenticating(1), authenticated(2), associating(3), associated(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the status of station." ::= { wlan0StationListEntry 9 } wlan0stationRssi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Signal Strength Indicator. This attribute shall indicate the strength of an incomming signal of station." ::= { wlan0StationListEntry 10 } wlan0idleTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Idle time of station." ::= { wlan0StationListEntry 11 } wlan0stationChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the channel number used." ::= { wlan0StationListEntry 12 } wlan0txDataRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the TX DataRate." ::= { wlan0StationListEntry 13 } wlan0rxDataRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Rx DataRate." ::= { wlan0StationListEntry 14 } wlan0stationState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the station State." ::= {wlan0StationListEntry 15 } wlan0stationAuthenticationType OBJECT-TYPE SYNTAX INTEGER { none(0), open(1), shared(2), legacy8021x(3), auto(4), wpa(5), wpa2(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicates how to authenticate the station." ::= { wlan0StationListEntry 16 } wlan0stationAID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the association ID value assigned by the AP to identify the association." ::= { wlan0StationListEntry 17 } wlan0stationTxSeq OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Transmit Sequence of the station." ::= { wlan0StationListEntry 18 } wlan0stationRxSeq OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Receive Sequence of the station." ::= { wlan0StationListEntry 19 } wlan0stationCapability OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the capability of station associated." ::= { wlan0StationListEntry 20 } wlan0stationCipher OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Cipher of station associated." ::= { wlan0StationListEntry 21 } wlan0stationRecvPayloadBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the count of the payload bytes received from the wireless client." ::= { wlan0StationListEntry 22 } wlan0stationTransPayloadBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the count of the payload bytes sent to the wireless client." ::= { wlan0StationListEntry 23 } -- wlan1StationList Table wlan1StationListTable OBJECT-TYPE SYNTAX SEQUENCE OF Wlan1StationListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of associated stations in a tabular form." ::= { stationList 2 } wlan1StationListEntry OBJECT-TYPE SYNTAX Wlan1StationListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the stationListTable." INDEX { wlanIndex , wlan1macAddress } ::= { wlan1StationListTable 1 } Wlan1StationListEntry ::= SEQUENCE { wlan1macAddress MacAddress, wlan1clientIpaddr IpAddress, wlan1associationTime DisplayString, wlan1clientWirelessMode INTEGER, wlan1associatedSsid DisplayString, wlan1associatedBssid MacAddress, wlan1associatedSNR INTEGER, wlan1clientChannelWidth INTEGER, wlan1stationStatus INTEGER, wlan1stationRssi INTEGER, wlan1idleTime INTEGER, wlan1stationChannel INTEGER, wlan1txDataRate DisplayString, wlan1rxDataRate DisplayString, wlan1stationState DisplayString, wlan1stationAuthenticationType INTEGER, wlan1stationAID INTEGER, wlan1stationTxSeq INTEGER, wlan1stationRxSeq INTEGER, wlan1stationCapability DisplayString, wlan1stationCipher DisplayString, wlan1stationRecvPayloadBytes INTEGER, wlan1stationTransPayloadBytes INTEGER } wlan1macAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate MAC address of the associated stationID." ::= { wlan1StationListEntry 1 } wlan1clientIpaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate IP address of the associated stationID." ::= { wlan1StationListEntry 2 } wlan1associationTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate ssid of the VAP to which the station is associated." ::= { wlan1StationListEntry 3 } wlan1clientWirelessMode OBJECT-TYPE SYNTAX INTEGER { dot11b(0), dot11bg(1), dot11ng(2), dot11a(3), dot11na(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the wireless mode of the associated stationID." ::= { wlan1StationListEntry 4 } wlan1associatedSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate ssid of the VAP to which the station is associated." ::= { wlan1StationListEntry 5 } wlan1associatedBssid OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate bssid of the VAP to which the station is associated." ::= { wlan1StationListEntry 6 } wlan1associatedSNR OBJECT-TYPE SYNTAX INTEGER UNITS "0.25dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the noise margin of Ap with respect to the its recieved signal from station." ::= { wlan1StationListEntry 7 } wlan1clientChannelWidth OBJECT-TYPE SYNTAX INTEGER { none(0), static20MHz(1), static40MHz(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the channel width for the associated station in 11n mode. Not applicable for a station in 11a/b/g mode." ::= { wlan1StationListEntry 8 } wlan1stationStatus OBJECT-TYPE SYNTAX INTEGER { none(0), authenticating(1), authenticated(2), associating(3), associated(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the status of station." ::= { wlan1StationListEntry 9 } wlan1stationRssi OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Receive Signal Strength Indicator. This attribute shall indicate the strength of an incomming signal of station." ::= { wlan1StationListEntry 10 } wlan1idleTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Idle time of station." ::= { wlan1StationListEntry 11 } wlan1stationChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the channel number used." ::= { wlan1StationListEntry 12 } wlan1txDataRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the TX DataRate." ::= { wlan1StationListEntry 13 } wlan1rxDataRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Rx DataRate." ::= { wlan1StationListEntry 14 } wlan1stationState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the station State." ::= { wlan1StationListEntry 15 } wlan1stationAuthenticationType OBJECT-TYPE SYNTAX INTEGER { none(0), open(1), shared(2), legacy8021x(3), auto(4), wpa(5), wpa2(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicates how to authenticate the station." ::= { wlan1StationListEntry 16 } wlan1stationAID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the association ID value assigned by the AP to identify the association." ::= { wlan1StationListEntry 17 } wlan1stationTxSeq OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Transmit Sequence of the station." ::= { wlan1StationListEntry 18 } wlan1stationRxSeq OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Receive Sequence of the station." ::= { wlan1StationListEntry 19 } wlan1stationCapability OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the capability of station associated." ::= { wlan1StationListEntry 20 } wlan1stationCipher OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the Cipher of station associated." ::= { wlan1StationListEntry 21 } wlan1stationRecvPayloadBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the count of the payload bytes received from the wireless client." ::= { wlan1StationListEntry 22 } wlan1stationTransPayloadBytes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the count of the payload bytes sent to the wireless client." ::= { wlan1StationListEntry 23 } -- ********************************************************* -- 802.1x Information -- ********************************************************* info802dot1x OBJECT IDENTIFIER ::= { wndap350 9 } authinfo OBJECT IDENTIFIER ::= { info802dot1x 1 } priRadIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the Primary Radius Server." ::= { authinfo 1 } priRadPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number used for authentication at the Primary Radius Server." ::= { authinfo 2 } priRadSharedSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secret shared between NAS and the Primary Radius Server." ::= { authinfo 3 } sndRadIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Internet address of the Second Radius Server." ::= { authinfo 4 } sndRadPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Port number used for authentication at the Second Radius Server." ::= { authinfo 5 } sndRadSharedSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "Secret shared between NAS and the Second Radius Server." ::= { authinfo 6 } -- The primary account RADIUS server setting. accntinfo OBJECT IDENTIFIER ::= { info802dot1x 2 } priAcntIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the Primary radius account server." ::= { accntinfo 1 } priAcntPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "port number of the Primary radius account server." ::= { accntinfo 2 } priAcntSharedSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "password used by the ap to connect to the Primary radius account serve." ::= { accntinfo 3 } sndAcntIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the Second radius account server." ::= { accntinfo 4 } sndAcntPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "port number of the Second radius account server." ::= { accntinfo 5 } sndAcntSharedSecret OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "password used by the ap to connect to the Second radius account server." ::= { accntinfo 6 } -- Authentication Settings authSettings OBJECT IDENTIFIER ::= { info802dot1x 3 } reauthTime OBJECT-TYPE SYNTAX INTEGER (1800..36000) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate 802.1x reauth time." ::= { authSettings 1 } wpaGroupKeyUpdateCondition OBJECT-TYPE SYNTAX INTEGER { never(0), seconds(1), disconnect(2), secondsAndDisconnect(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate WPA group key update condition." ::= { authSettings 2 } wpaGroupKeyUpdateIntervalSecond OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This fields indicates the wpa keyupdate sec interval." ::= { authSettings 3 } -- ********************************************************* -- Command Information -- ********************************************************* userCommand OBJECT IDENTIFIER ::= { wndap350 10 } resetAP OBJECT-TYPE SYNTAX INTEGER { reboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object causes the device to reboot. The actual value is ignored." ::= { userCommand 1 } firmwareUpgrade OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to the name of a file, causes the device to download /.Run the HTTPd in the remote machine After the file is downloaded, it is installed replacing the existing firmware, and the device is restarted." ::= { userCommand 2 } backupSettings OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to the hostname username password and name of a file, causes the running config to be saved to the file. ipAddress username password filename ." ::= { userCommand 3 } restoreSettings OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to the hostname username password and name of a file, causes the device to download the file .After the file is downloaded, it is copied to the start-up config, and the device is restarted." ::= { userCommand 4 } restoreFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { restore (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object causes the device to restore factory default settings. The actual value is ignored." ::= { userCommand 5 } restoreDefaultPassword OBJECT-TYPE SYNTAX INTEGER { restore (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object causes the device to restore the default administrator password." ::= { userCommand 6 } -- ********************************************************************** -- * System Time Setting Table -- ******************************************************************** timeSettings OBJECT IDENTIFIER ::= { wndap350 11 } currentTime OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This field indicates the current system time in a format: YYYY/MM/DD hh:mm:ss." ::= { timeSettings 1 } timeZone OBJECT-TYPE SYNTAX INTEGER { afghanistan(0), albania(1), algeria(2), american-samoa(3), andorra(4), angola(5), anguilla(6), antigua-and-barbuda(7), argentina(8), armenia(9), aruba(10), australia-lordHoweIsland(11), australia-new-south-wales-capitol-territory-victoria(12), australia-northern-territory(13), australia-queensland(14), australia-south-australia-and-broken-hill(15), australia-tasmania(16), australia-western(17), austria(18), azerbaijan(19), bahamas(20), bahrain(21), bangladesh(22), barbados(23), belarus(24), belgium(25), belize(26), benin(27), bermuda(28), bhutan(29), bolivia(30), bonaire(31), bosnia-herzegovina(32), botswana(33), brazil-east-including-all-coast-and-brasilia(34), brazil-fernando-de-noronha(35), brazil-trinity-of-acre(36), brazil-west(37), british-virgin-islands(38), brunei(39), bulgaria(40), burkina-faso(41), burma(42), burundi(43), cambodia(44), cameroon(45), canada-atlantic(46), canada-central(47), canada-eastern(48), canada-mountain(49), canada-newfoundland(50), canada-pacific-and-yukon(51), canada-saskatchewan(52), cape-verde(53), cayman-islands(54), central-african-republic(55), chad(56), chile(57), chile-easter-island(58), china(59), christmas-islands(60), cocos-keeling-islands(61), colombia(62), congo(63), cook-islands(64), costa-rica(65), cote-d-ivoire(66), croatia(67), cuba(68), curacao(69), cyprus(70), czech-republic(71), denmark(72), djibouti(73), dominica(74), the-dominican-republic(75), ecuador(76), ecuador-galapagos-islands(77), egypt(78), el-salvador(79), equatorial-guinea(80), eritrea(81), estonia(82), ethiopia(83), faroe-islands(84), fiji(85), finland(86), france(87), french-guiana(88), french-polynesia(89), gabon(90), the-gambia(91), georgia(92), germany(93), ghana(94), gibraltar(95), greece(96), greenland-scorsbysund(97), greenland-thule(98), grenada(99), guadeloupe(100), guam(101), guatemala(102), guinea-bissau(103), guyana(104), haiti(105), hawaii(106), honduras(107), hong-kong(108), hungary(109), iceland(110), india(111), indonesia-central(112), indonesia-east(113), indonesia-west(114), iran(115), iraq(116), ireland(117), israel(118), italy(119), jamaica(120), japan(121), johnston-islands(122), jordan(123), juan-fernandez-islands(124), kazakhstan(125), kenya(126), kiribati(127), kuwait(128), kyrgyzstan(129), laos(130), latvia(131), lebanon(132), leeward-islands(133), lesotho(134), liberia(135), libya(136), liechtenstein(137), lithuania(138), luxembourg(139), macao(140), macedonia(141), madagascar(142), malawi(143), malaysia(144), maldives(145), mali(146), malta(147), mariana-Islands(148), martinique(149), mauritania(150), mauritius(151), mayotte(152), mexico(153), mexico-baj-n(154), mexico-baj-s(155), midway-islands(156), moldova(157), monaco(158), mongolia(159), montenegro(160), montserrat(161), morocco(162), mozambique(163), namibia(164), nauru(165), nepal(166), the-netherlands-antilles(167), the-netherlands(168), new-caledonia(169), new-hebrides(170), new-zealand(171), new-zealand-chatham-island(172), nicaragua(173), niger(174), nigeria(175), niue-islands(176), norfolk-island(177), north-korea(178), norway(179), oman(180), pakistan(181), palau(182), panama(183), papua-new-guinea(184), paraguay(185), peru(186), philippines(187), pitcairn-island(188), poland(189), portugal-azores(190), portugal-madeira(191), puerto-rico(192), qatar(193), reunion(194), romania(195), russia-moscow(196), russian-fed-zone-1-kaliningrad(197), russian-fed-zone-10-magadan(198), russian-fed-zone-11-petropavlovsk-kamchatsky(199), russian-fed-zone-2-st-petersburg(200), russian-fed-zone-3-izhevsk(201), russian-fed-zone-4-ekaterinburg(202), russian-fed-zone-5-novosibirsk(203), russian-fed-zone-6-krasnojarsk(204), russian-fed-zone-7-irkutsk(205), russian-fed-zone-8-yakatsk(206), russian-fed-zone-9-vladivostok(207), rwanda(208), saint-pierre-and-miquelon(209), san-marino(210), sao-tome-and-principe(211), saudi-arabia(212), senegal(213), serbia(214), the-seychelles(215), sierra-leone(216), singapore(217), slovakia(218), slovenia(219), solomon-islands(220), somalia(221), south-africa(222), south-georgia(223), south-korea(224), spain(225), spain-canary-islands(226), sri-lanka(227), st-helena(228), st-kitts-nevis(229), st-lucia(230), st-vincent-and-the-grenadines(231), sudan(232), suriname(233), swaziland(234), sweden(235), switzerland(236), syria(237), tahiti(238), taiwan(239), tajikistan(240), tanzania(241), thailand(242), togo(243), tonga(244), trinidad-and-tobago(245), tunisia(246), turkey(247), turkmenistan(248), turks-and-caicos-islands(249), tuvalu(250), uganda(251), ukraine(252), ukraine-simferopol(253), united-arab-emirates(254), united-kingdom(255), uruguay(256), us-virgin-islands(257), usa-alaska(258), usa-aleutian-islands(259), usa-arizona(260), usa-central(261), usa-eastern(262), usa-indiana(263), usa-mountain(264), usa-pacific(265), uzbekistan(266), vanuatu(267), vatican-city(268), venezuela(269), vietnam(270), wake-islands(271), wallis-and-futana-islands(272), western-samoa(273), windward-islands(274), yemen(275), zaire-kasai(276), zaire-kinshasa(277), zambia(278), zimbabwe(279), UTC(280) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the time zone of the system." ::= { timeSettings 2 } ntpClientStatus OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the NTP client is enabled." ::= { timeSettings 3 } customNtpServer OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether custom NTP server is to be used." ::= { timeSettings 4 } ntpAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..119)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the address or domain name of the NTP server." ::= { timeSettings 5 } -- ********************************************************************** -- * DHCP Server Setting Table -- ********************************************************************** dhcpsSettings OBJECT IDENTIFIER ::= { wndap350 12 } dhcpServerStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the status of DHCP server. The default value is disable(0)." ::= { dhcpsSettings 1 } dhcpsVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the VLAN ID of DHCP server's VLAN. Default value of DHCP server's VLAN ID is 1." ::= { dhcpsSettings 2 } dhcpsIpStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the starting IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 3 } dhcpsIpEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 4 } dhcpsNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the net mask of DHCP server will give. ***The value can only be set to the net mask address in dot format." ::= { dhcpsSettings 5 } dhcpsGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the gateway IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 6 } dhcpsPriDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the primary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 7 } dhcpsSndDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the secondary DNS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 8 } dhcpsPriWins OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the primary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 9 } dhcpsSndWins OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the secondary WINS IP address of DHCP server will give. ***The value can only be set to a IP address in dot format." ::= { dhcpsSettings 10 } dhcpsLeaseTime OBJECT-TYPE SYNTAX INTEGER (2..143999) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the IP lease time of DHCP server will give to DHCP clients in minutes. The default value is 1 day (1440 minutes)." ::= { dhcpsSettings 11 } -- ********************************************************************** -- * SYSLOG Server Setting Table -- ********************************************************************** logSettings OBJECT IDENTIFIER ::= { wndap350 13 } syslogStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute shall indicate the status of syslog. The default value is disable(0)." ::= { logSettings 1 } syslogSrvIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attributes shall indicates the IP address of the syslog server. ***The value can only be set to a IP address in dot format." ::= { logSettings 2 } syslogSrvPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This attributes shall indicates the Port of the Syslog server. The default value of syslog server port is 514." ::= { logSettings 3 } -- ********************************************************************** -- * HTTP Redirect Settings Table -- ********************************************************************** httpRedirectSettings OBJECT IDENTIFIER ::= { wndap350 14 } httpRedirectStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, redirects the first HTTP request from a client to an external hotspot server. The default value is disable(0)." ::= { httpRedirectSettings 1 } httpRedirectURL OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..119)) MAX-ACCESS read-write STATUS current DESCRIPTION "Initial HTTP requests from the client will be redirected to this external web server." ::= { httpRedirectSettings 2 } -- ********************************************************************** -- * AP Scan List -- ********************************************************************** apList OBJECT IDENTIFIER ::= { wndap350 15 } -- Detected AP Table detectedApTable OBJECT-TYPE SYNTAX SEQUENCE OF DetectedApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "detectedAp Table shows list of detected neighbouring APs." ::= { apList 1 } detectedApEntry OBJECT-TYPE SYNTAX DetectedApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the detectedApTable." INDEX { wlanIndex, apMac } ::= { detectedApTable 1 } DetectedApEntry ::= SEQUENCE { apMac MacAddress, apSsid DisplayString, apPrivacy TruthValue, apBand DisplayString, apChannel INTEGER, apRate INTEGER, apBeaconInterval INTEGER, apNumBeacons INTEGER, apLastBeacon DisplayString } apMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate MAC address of the detected AP." ::= { detectedApEntry 1 } apSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate ssid of the detected AP." ::= { detectedApEntry 2 } apPrivacy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate whether privacy is enabled." ::= { detectedApEntry 3 } apBand OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the operating band of detected AP." ::= { detectedApEntry 4 } apChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the channel number used." ::= { detectedApEntry 5 } apRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the rate." ::= { detectedApEntry 6 } apBeaconInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the beacon interval in kus (1.024 ms)." ::= { detectedApEntry 7 } apNumBeacons OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the number of beacons received." ::= { detectedApEntry 8 } apLastBeacon OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the time of the last beacon." ::= { detectedApEntry 9 } -- Known AP Table knownApTable OBJECT-TYPE SYNTAX SEQUENCE OF KnownApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "knownAp Table shows list of known APs." ::= { apList 2 } knownApEntry OBJECT-TYPE SYNTAX KnownApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the knownApTable." INDEX { wlanIndex, knownApMac } ::= { knownApTable 1 } KnownApEntry ::= SEQUENCE { knownApMac MacAddress, knownApSsid DisplayString, knownApPrivacy TruthValue, knownApBand DisplayString, knownApChannel INTEGER, knownApRate INTEGER, knownApBeaconInterval INTEGER, knownApNumBeacons INTEGER, knownApLastBeacon DisplayString, knownApEntryStatus RowStatus } knownApMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate MAC address of the known AP." ::= { knownApEntry 1 } knownApSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate ssid of the known AP." ::= { knownApEntry 2 } knownApPrivacy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate whether privacy is enabled." ::= { knownApEntry 3 } knownApBand OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the operating band of known AP." ::= { knownApEntry 4 } knownApChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the channel number used." ::= { knownApEntry 5 } knownApRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the rate." ::= { knownApEntry 6 } knownApBeaconInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the beacon interval in kus (1.024 ms)." ::= { knownApEntry 7 } knownApNumBeacons OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the number of beacons received." ::= { knownApEntry 8 } knownApLastBeacon OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the time of the last beacon." ::= { knownApEntry 9 } knownApEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The Known AP Entry status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry" ::= { knownApEntry 10 } -- Unknown AP Table unknownApTable OBJECT-TYPE SYNTAX SEQUENCE OF UnknownApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "unknownAp Table shows list of unknown APs." ::= { apList 3 } unknownApEntry OBJECT-TYPE SYNTAX UnknownApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the unknownApTable." INDEX { wlanIndex, unknownApMac } ::= { unknownApTable 1 } UnknownApEntry ::= SEQUENCE { unknownApMac MacAddress, unknownApSsid DisplayString, unknownApPrivacy TruthValue, unknownApBand DisplayString, unknownApChannel INTEGER, unknownApRate INTEGER, unknownApBeaconInterval INTEGER, unknownApNumBeacons INTEGER, unknownApLastBeacon DisplayString } unknownApMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate MAC address of the unknown AP." ::= { unknownApEntry 1 } unknownApSsid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate ssid of the unknown AP." ::= { unknownApEntry 2 } unknownApPrivacy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate whether privacy is enabled." ::= { unknownApEntry 3 } unknownApBand OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the operating band of unknown AP." ::= { unknownApEntry 4 } unknownApChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the channel number used." ::= { unknownApEntry 5 } unknownApRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the rate." ::= { unknownApEntry 6 } unknownApBeaconInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the beacon interval in kus (1.024 ms)." ::= { unknownApEntry 7 } unknownApNumBeacons OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the number of beacons received." ::= { unknownApEntry 8 } unknownApLastBeacon OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute shall indicate the time of the last beacon." ::= { unknownApEntry 9 } -- ********************************************************************** -- * MAC Access Control Table -- ********************************************************************** accessControlSettings OBJECT IDENTIFIER ::= { wndap350 16 } wlanAccessControlLocalTable OBJECT-TYPE SYNTAX SEQUENCE OF WlanAccessControlLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACL attributes in tablular form to allow for multiple instances on an agent." ::= { accessControlSettings 1 } wlanAccessControlLocalEntry OBJECT-TYPE SYNTAX WlanAccessControlLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the wlanAccessControlLocalTable." INDEX { wlanIndex, aclMAC } ::= { wlanAccessControlLocalTable 1 } WlanAccessControlLocalEntry ::= SEQUENCE { aclMAC MacAddress, aclMacStatus RowStatus } aclMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This field should indicate an MAC address entry in the access control local database." ::= { wlanAccessControlLocalEntry 1 } aclMacStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry" ::= { wlanAccessControlLocalEntry 2 } -- ********************************************************************** -- * Traps -- ********************************************************************** traps OBJECT IDENTIFIER ::= { wndap350 17 } rogueApDetectionTrap OBJECT IDENTIFIER ::= { traps 1 } rogueApDetectionNotification NOTIFICATION-TYPE OBJECTS { rogueApDetectionMacAddr, rogueApDetectionSsid, rogueApDetectionPrivacy, rogueApDetectionBand, rogueApDetectionChannel, rogueApDetectionRate, rogueApDetectionBeaconInt, rogueApDetectionNumBeacon, rogueApDetectionLastBeacon } STATUS current DESCRIPTION "This trap shall notify detection of an unknown AP." ::= { rogueApDetectionTrap 1 } rogueApDetectionObjects OBJECT IDENTIFIER ::= { rogueApDetectionTrap 2 } rogueApDetectionMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the MAC address of the detected unknown AP." ::= { rogueApDetectionObjects 1 } rogueApDetectionSsid OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the SSID of the detected unknown AP." ::= { rogueApDetectionObjects 2 } rogueApDetectionPrivacy OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the privacy option for the detected unknown AP." ::= { rogueApDetectionObjects 3 } rogueApDetectionBand OBJECT-TYPE SYNTAX INTEGER { band24GHz(0), band5GHz(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the operating band of the detected unknown AP." ::= { rogueApDetectionObjects 4 } rogueApDetectionChannel OBJECT-TYPE SYNTAX INTEGER { ch1(1),ch2(2),ch3(3),ch4(4), ch5(5),ch6(6),ch7(7), ch8(8),ch9(9),ch10(10),ch11(11), ch12(12),ch13(13),ch14(14), ch34(34),ch36(36),ch38(38), ch40(40),ch42(42),ch44(44), ch46(46),ch48(48),ch52(52), ch56(56),ch60(60),ch64(64), ch100(100),ch104(104),ch108(108), ch112(112),ch116(116),ch120(120), ch124(124),ch128(128), ch132(132),ch136(136), ch140(140),ch149(149), ch153(153),ch157(157), ch161(161),ch165(165),ch169(169) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the operating channel of the detected unknown AP." ::= { rogueApDetectionObjects 5 } rogueApDetectionRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the data rate of the detected unknown AP." ::= { rogueApDetectionObjects 6 } rogueApDetectionBeaconInt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the beacon interval of the detected unknown AP." ::= { rogueApDetectionObjects 7 } rogueApDetectionNumBeacon OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the number of beacons sent by the detected unknown AP during the scan interval." ::= { rogueApDetectionObjects 8 } rogueApDetectionLastBeacon OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the time at which last beacon was sent by the detected unknown AP." ::= { rogueApDetectionObjects 9 } maxStationTrap OBJECT IDENTIFIER ::= { traps 2 } maxStationNotification NOTIFICATION-TYPE OBJECTS { maxStationMacAddr, maxStationBand } STATUS current DESCRIPTION "This trap shall notify reaching the max station limit." ::= { maxStationTrap 1 } maxStationObjects OBJECT IDENTIFIER ::= { maxStationTrap 2 } maxStationMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the MAC address of the interface on which max station limit reached." ::= { maxStationObjects 1 } maxStationBand OBJECT-TYPE SYNTAX INTEGER { band24GHz(0), band5GHz(1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the operating band of the interface on which max station limit reached." ::= { maxStationObjects 2 } aclMismatchTrap OBJECT IDENTIFIER ::= { traps 3 } aclMismatchNotification NOTIFICATION-TYPE OBJECTS { aclMismatchMacAddr, aclMismatchBssid, aclMismatchSsid } STATUS current DESCRIPTION "This trap shall notify the denial of a station." ::= { aclMismatchTrap 1 } aclMismatchObjects OBJECT IDENTIFIER ::= { aclMismatchTrap 2 } aclMismatchMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the MAC address of the station which was denied association request due to ACL mismatch." ::= { aclMismatchObjects 1 } aclMismatchBssid OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains BSSID of the VAP on which the station was denied association request due to ACL mismatch." ::= { aclMismatchObjects 2 } aclMismatchSsid OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains the SSID of the VAP on which the station was denied association request due to ACL mismatch." ::= { aclMismatchObjects 3 } noBeaconTrap OBJECT IDENTIFIER ::= { traps 4 } noBeaconNotification NOTIFICATION-TYPE OBJECTS { noBeaconBssid } STATUS current DESCRIPTION "This trap shall notify no outgoing beacons." ::= { noBeaconTrap 1 } noBeaconObjects OBJECT IDENTIFIER ::= { noBeaconTrap 2 } noBeaconBssid OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object contains BSSID of the VAP for which the watch dog timer detected no outgoing beacons." ::= { noBeaconObjects 1 } END