WNDAP330 Firmware Version 3.0.5

New Features

• Added support for central management by WMS5316 and WMS105
• SSL security issue with protocol renegotiation is fixed in this release

To Install

1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button below to a convenient place such as your desktop.
   DO NOT open or unzip this file, just right-click and save it.
3. Login to Web Administration interface of the Access Point -
   By default, http://192.168.0.235 is the Administration URL to the Web GUI. Enter admin for the user name and password for the password.
4. Click Mainenance > Upgrade > Firmware Upgrade.
5. Click Browse and select the firmware image you just downloaded.
6. Click Apply.
   Do NOT interrupt or power off the computer until the upgrade process is completed. Wait for the router to reboot.
7. After the router boots up, log in the router again.
   You MUST Reset the router to default settings after upgrading the firmware
8. Click Management > Backup/Restore Settings.
9. Click Restore. The router reboots when the Erase operation is done.
10. If you would like to check that the upgrade was successful, log in to the router again athttp://192.168.0.235, and check the firmware version.

Document Type:

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.