WND930 Firmware Version 2.0.4

New Features & Enhancements

• When Russia is selected for the Country/Region, only U-NII-1 and U-NII-2A bands for 5GHz are enabled
• Adjusted 5GHz channel for Australia, New Zealand and CE Countries
• Forced user to change default password after login to the device for the first time

Bug Fixes

• Fixed the issue of multiple browser - Clicking on Cancel still login into AP UI
• Fixed the issue When Dynamic 20 / 40 channel width is selected for Russia country, it’s not applying from local UI
• Fixed the issue where unable to set shared Key as network authentication and passphrase other than alphabets are NOT taking

Known Issues:

1. PING failure is observed over point-to-point WDS connection between WND930 & WNDAP660 when WPA2-PSK authentication is used
2. 5 GHz radio WDS link between WND930 and WNDAP360 AP with OPEN-NONE / WPA2-PSK authentication is not working with 20MHz and 40Mhz channel width
3. Wireless stations not getting IP address when Remote MAC Authentication enabled with WPA2 RADIUS authentication

NOTES:

1. The default IP address of the AP is 192.168.0.100 if DHCP server is not present.

2. In the following scenarios, AP is expected to reboot automatically for the configuration to take affect.
   1. Change of Country/Region
   2. After Firmware upgrade
   3. After Restore Configuration Settings
   4. Reset factory defaults

In all the other conditions AP is not supposed to reboot automatically.

Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is WND930_V2.0.4_firmware.tar

Download Link: http://www.downloads.netgear.com/files/GDC/WND930/WND930_V2.0.4_firmware.zip