Bug Fixes:

1. Fixed issue that arises after changing the IP address to static, then reboot, then board can't auto set IP to the static IP address.

Installation Instructions:

1. Download and unzip the new file from NETGEAR. The filename after unzipping is wnce4004-V1.0.0.32.img
2. Using a web browser, login to the router as admin.
3. Under Maintenance click Router Upgrade.
4. Click Browse and locate the upgrade file wnce4004-V1.0.0.32.img.
5. Click Upload.
6. Wait for the upgrade progress bar to complete and final prompt to appear.

If problems occur after upgrading, try clearing the configuration by pressing the Factory Defaults pushbutton on the rear panel until the Test LED blinks (about 5 seconds). Then reenter your configuration information manually.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.