WN311B Firmware Version 5.0

WN311B Firmware Version 5.0 (supports Vista)

Published June 1, 2007

Driver version: 4.100.34.0 (XP/2K), 4.102.15.61 (Vista) 
Utility version: 4.22.11.8 (XP/2K), 6.64.0.8 (Vista)

New Features:

1. Added German GUI support in Vista OS.
2. Fixed: The site survey page might report incorrect security mode.
3. Fixed: The utility can't wake up after Laptop sleep mode on Vista OS.

Known Issues:

1. On Vista: The hidden wireless network can't be found and listed on Network page.The behavior is the same as Vista WLAN Auto configuration.

Installation

1. Download the file to a convenient location such as your desktop.
2. Shut down your computer.
3. Unplug your computer from the wall,Open your computer case. Ground yourself on an outside metal part of the computer, such as a flat surface on the back. Taking care only to touch the silver mounting bracket on the end, remove the adapter from your computer.Replace the computer case.
4. Plug the computer in.
5. Power up the computer and wait for it to reboot.
6. Select Start > All Programs. Then select the card, then Uninstall. Follow the on screen steps to remove the old version of the software.
7. Run Setup file from the folder where you saved the downloaded file.
8. Select the Country Domain, click Next
9. Click OK at the Country Domain Selection warning.
10. Click Yes to the License Agreement.
11. Click Finish
12. Completely power down your computer.Unplug your computer from the wall.Open your computer case.Ground yourself on an outside metal part of the computer, such as a flat surface on the back.Taking care only to touch the silver mounting bracket and the top of the adapter, place the adapter securely into your computer.Replace the computer case.
13. Power up the computer and wait for it to reboot.
14. Click Next to start the Found New Hardware Wizard.Click Finish when Found New Hardware Wizard is completed.
15. Complete the NETGEAR Touchless Wizard.

Document Type:

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.