WMS5316 Firmware Version 2.0.3

Release Date: 01/27/2010

Notes

  1. WMS5316 default IP is 192.168.0.250 
  2. WMS5316 supports configuration and monitoring of following Access Point models running at least below specified firmware versions. 

            a. WNDAP330: Firmware WNDAP330_V3.0.4. 
            b. WNDAP350: Firmware WNDAP350_V2.0. 
            c. WNAP210: Firmware WNAP210_2.0.8. 
            d. WG302v2: Firmware 5.2.3 or Firmware 5.2.3 NA. 
            e. WG103: Firmware WG103_2.0. 
            f.  WN802Tv2: Firmware WN802Tv2_V3.1.2. 
            g. WG602v4: Firmware V1.1.0.

Bug Fixes:

  1. Fix for Field issue 2067; MAC ACL auth settings not pushed to WNDAP350 & WNDAP330 
  2. Add new Netgear OUI c03f0e 
  3. Fixes related to Mac ACL 
         - On WG302, ACLs more than 23 can be pushed. 
         - On WG602, Only 3 ACL entries were getting pushed to AP. 
         - Addition and Deletion of 256 ACLs in one shot could take long time on WG302, this has been reduced to <4min 
  4. Fix for large channel list in South Korea Country code in WNDAP330, which caused memory overflow and controller reboot. 

Known Issues:

  1. Auto discovery displays model of only one of the Access Point when there are Access Points in the network with duplicate IP address. Model of all other Access Points with same IP address are displayed as UNKNOWN.
  2. The model of Access Point running unsupported version will be displayed as UNKNOWN.
  3. Auto Discovery may also discover other Netgear devices as UNKNOWN.
  4. Guest Access feature is configured only on WNDAP350, WNAP210 and WG103.
  5. WG602 and WN802Tv2 support only limited features. 

Upgrade Instructions:

  1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
  2. Download using the button below to a convenient place such as your desktop.
  3. Log in to access the WMS5316 via http/https browser interface via http://192.168.0.250
  4. The default username/password for WMS5316 is admin/password.
  5. Go to “Maintenance -> Upgrade -> Firmware Upgrade” page and select the file netgear_wms5316_2.0.bin and click Apply.

    This will start the software upgrade to your WMS5316.  This may take some time. Do not interrupt the upgrade process. 
    At the conclusion of the upgrade, your WMS5316 will reboot.

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.