WGT624v3 Firmware Version 2.0.21_1.0.1 (North America)

WGT624v3 Firmware Version 2.0.21_1.0.1 (North America)
for North America Only

Published: July 11, 2007

Bug Fixes

  1. Fixed an issue where the wireless beacon is lost.
  2. Improved wireless stability under noisy environment
  3. Disabled the “Advanced 108M feature“ option in advanced wireless setting web page if Auto-108 mode is not enabled.

Installation Instructions

Please perform firmware upgrade with “wired” or Ethernet connection only.

  1. Before you upgrade write down all current settings as you need to enter them MANUALLY after upgrading.
  2. Open the browser and access the router (usually the address is http://192.168.1.1).
  3. Log in to the router (User Name = admin and Password = password unless you have changed it).
  4. Click Maintenance > Router Upgrade.
  5. Click Browse and locate the upgrade file (download link is below).
  6. Click Upload.
  7. Wait for the router to reboot.
  8. Verify that the router firmware was upgraded.
  9. Reset router to factory defaults.
  10. Wait for the router to reboot.
  11. Reenter the settings you noted down before upgrading.

 

Document Type:

Downloads > Driver/Software/Firmware
Published 12/02/2008 01:23 PM   |   Updated 09/03/2011 01:10 PM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.