WGR614v9 Firmware Version 1.2.2

Published Oct 30, 2008.

NOTE: this firmware cannot work with the old CD’s (earlier than CD version 2.0) that do not have the Smart Wizard 3.0 application. 

Modifications and Bug Fixes:

  1. Added Smart Wizard 3.0
  2. Fixed: Cannot establish the PPPoE connection through the Motorola 2210 modem.
  3. Fixed: Users cannot do a FTP download or upload session that takes more than 30 minutes; the operation will not complete successfully.
  4. Fixed: When using FireFox 3.0 to upgrade firmware, users always see an error message saying the filename is not valid.
  5. Fixed: Blocking Schedule: cannot set a schedule from 10PM to 4PM (over the midnight)

Known Issues:

  1. FVS114 VPN sometimes cannot pass through the router. 
    To work around the problem, please make sure there is only one VPN client active on the LAN. If that still does not work, reboot the router and create the VPN connection right after the router boots up and before running any other application.

Installation Instructions:

  1. Download the file to a convenient place such as your desktop.

    Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

  2. Open a Web browser.
  3. Access the router (http://192.168.1.1 or the Default Gateway address if the router's default IP was changed).
  4. Log in the router (User Name = admin and Password = password, unless you changed it).
  5. Write down all settings that you entered when previously configuring. (Usually this includes information such as ISP configuration and wireless security settings.)
  6. Under Maintenance, click Router Upgrade.
  7. Click Browse and locate the firmware upgrade file.
  8. Click Upload.
  9. Wait for the router to reboot.
  10. Under Maintenance, click Settings Backup, then click Erase. (Or press the reset button on the back for 10 seconds.)
  11. Wait one minute for the router to reboot.
  12. Manually enter the configuration information you wrote down in Step 4.

 

Document Type:

Downloads > Driver/Software/Firmware
Published 12/03/2008 04:35 PM   |   Updated 08/15/2011 05:07 AM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.