Bug Fixes:

• Fixes the issue where the transmitting power of the access point (AP) is unexpectedly reduced when you enable 802.11r roaming for an SSID.
• Fixes the issue where RADIUS accounting does not work in an external captive portal for WiFi clients that are connected to the portal’s SSID with open authentication.

Known Issues:

• Facebook Wi-Fi authentication does not work because Facebook has discontinued the support for this feature.
  Workaround: Use the Instant Captive Portal feature or the basic Captive Portal feature.
• The captive portal splash page might display the error message "ERR_TOO_MANY_REDIRECTS" while connecting to a captive portal that is enabled on an SSID.
  Workaround: Clear the browser cache.
• 802.11r roaming does not work between an AP that runs firmware version 10.5.0.x and another AP that runs an older firmware version at the same Insight network location.
  Workaround: Upgrade all APs at an Insight network location to the latest firmware version.
• The AP stops responding after you first change or enable an Instant Captive Portal and then change or enable a dynamic VLAN (DVLAN) configuration, or the other way around.
  Workaround: After enabling the Instant Captive Portal, wait a few minutes before you enable the DVLAN configuration. Or, after enabling the DVLAN configuration, wait a few minutes before you enable the Instant Captive Portal.
• Clients connected to a captive portal that is configured on an SSID might not see the splash page for authentication when the VLAN of the SSID is the same as the management VLAN, a VLAN that is configured as a DVLAN, or a VLAN that has a multi-Pre-Shared Key (multi-PSK) configured.
  Workaround: For the SSID on which the captive portal is configured, use the default VLAN or a unique VLAN that is not used as the management VLAN, that is not a DVLAN, or that does not use MPSK.
• A RADIUS based MAC ACL does not work with multi-PSK and DVLAN.
• mDNS: A device running Windows might not discover certain printers.
  Workaround: Manually add the IP address of the printer on the Windows device.
• mDNS: Even though Apple AirPlay services are discoverable, they might not be accessible.
• Your web browser might not redirect automatically to the login page after a firmware upgrade.
  Workaround: Refresh the page in your web browser.
• Radio information on the AP Dashboard page might not be displayed properly.
  Workaround: Refresh the page in your web browser.
• Captive portal authentication does not work if you simultaneously change the captive portal and the VLAN configuration for an SSID.
  Workaround: Change either the captive portal configuration or the VLAN configuration for an SSID and save the changes. Then go back to the SSID and make the other configuration changes.
• When client isolation is enabled for an SSID, clients that are connected to the SSID cannot reach each other even if their IP addresses are added to the allowed list.
• Clients that use the Intel AX210 might encounter disruptions when roaming.
• Clients with the latest iOS version might not be able to roam successfully when both WPA3 security and 802.11r roaming are enabled on the same SSID.
  Workaround: Do not enable WPA3 and 802.11r roaming together.
• Video streaming to multiple clients does not work properly if there are more than eight clients in a single multicast group.
• If clients experience connectivity issues on the higher band channels of the 5 GHz radio and subsequently switch to the 2.4 GHz radio, they might experience lower throughput.
  Workaround: Configure lower band channels on the 5 GHz radio.
• Some newer IoT devices might experience issues connecting to the AP.
  Workaround: Upgrade the IoT devices to the latest driver version and try again. If security is set to WPA3 or WPA2/WPA3 mixed mode, change it to WPA2 mode, and try again.

Download Link: https://www.downloads.netgear.com/files/GDC/WAX610/WAX610_610Y_firmware_V10.5.0.16.zip

Firmware Update Instructions:

To update the firmware of your product, follow the instructions mentioned in the product manual. To refer the user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.