New Features and Enhancements:

• Wi-Fi 6 (802.11ax) capable
• Dual band: 2x2 2.4 GHz radio, 2x2 5GHz radio
• Maximum PHY rate: 600 Mbps (2.4 GHz) and 2400 Mbps (5 GHz)
• Supports up to 160 MHz bandwidth on 5GHz
• DL/UL OFDMA support
• DL/UL MU-MIMO
• Beamforming support
• PoE+ (802.3at) power
• Ethernet ports: 1x 2.5Gbps
• NETGEAR Insight management mode and standalone management mode
• IInstant Mesh support
• IInstant Wi-Fi support
• Instant Captive Portal support
• Up to 256 concurrent client connections (128 2.4GHz + 128 5GHz)
• WPA3 authentication support
• Enhanced Open (OWE) and OWE Transition Mode authentication
• 802.11r based fast roaming
• Dynamic VLAN support 
• Supports up to 8 SSIDs per radio
• NAT mode SSID support

Known Issues:

• Clients fail to reach to the Internet when connected to a NAT mode SSID with non-default management VLAN and URL filtering enabled.
• Channel width of an SSID configured with the 160MHz channel width changes to 80MHz if a radar event is detected. All channels may not be shown on the UI.
  Workaround: Manually set the channel width to 160MHz.
• Some clients may experience connectivity issues on 5GHz higher band channels and may switch to 2.4GHz band.
  Workaround: Configure 5GHz lower band channels.
• Some iOS devices with specific iOS versions might fail to connect to a WPA3 enterprise SSID.
  Workaround: Upgrade the device to the latest iOS version.
• Some clients might not display a pop-up window when connecting to a guest SSID, or there might be a delay before the splash page displays.
  Workaround: Use a web browser to access the Internet.
• An Intel Wireless AC 9560 client on the Windows 10 operating system might fail to connect when both PMF and 802.11r are enabled on the SSID.
  Workaround: Disable PMF.
• aplogin.com and aplogin.net might not redirect to the login page on some Android clients with specific Chrome browser versions.
  Workaround: Enter the access point's IP address to access the login page.
• Some older generation iOS devices with iOS version 14.4.2 might fail to connect to an SSID using WPA3 Personal security.
  Workaround: Change the SSID security to WPA3/WPA2 Personal.

Download Link : https://www.downloads.netgear.com/files/GDC/WAX615/WAX615-V10.1.0.26_firmware.zip

Firmware Update Instructions:

To update your product’s firmware in standalone mode, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.