Bug Fixes

• Fixes the issue in local captive portal feature where the HTTP redirect is not getting applied.

1. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop.
   The Firmware File name after extracting is WAC720_WAC730_V3.1.5.0.tar
   
   Download Link: http://www.downloads.netgear.com/files/GDC/WAC720/WAC720_WAC730_V3.1.5.0.zip
   
2. Login to the AP web interface.
3. Select Maintenance > Upgrade > Firmware Upgrade
4. Click the Browse button and locate the image (.tar) upgrade file.
5. Click the Apply button to initiate the upgrade process.
   During the upgrade process, the wireless access point automatically restarts. The upgrade process typically takes several minutes. When the Test LED turns off, wait a few more seconds before doing anything with the wireless access point.
   

NOTES:

Before using your AP, ensure you are using the latest firmware and factory default before placing your AP in production.

If the AP was configured before upgrading the AP to 3.1.5.0, then please
1.     Do “config backup”
2.     Upgrade to 3.1.5.0
3.     Restore backup  

The AP will factory reset when it upgraded to 3.1.5.0 and will erase the configuration.  Restore backup will replace the configuration.