RP614v4 Firmware Version 1.1.2

This firmware is only for the RP614v4 router model (note the "v4" in the name).

Advanced User Access

To bypass the Smart Wizard Configuration Assistant, log in to the router atwww.routerlogin.net/basicsetting.htm with the username of admin and password of password, both in lowercase letters.

Upgrading

Upgrade using the Web interface Router Upgrade menu.

  1. Write down all router settings you changed from the default values, as you need to reenter them after upgrading. (Examples are account name, domain name, ISP login name, and ISP login password.)
  2. Download the new firmware using the button below to a convenient place such as your desktop.
  3. Using the Web browser, and access the router by typing its IP address in the browser's URL address box (this is usually 192.168.1.1).
  4. Login to the router (User Name = admin and Password = password, unless you have changed it).Can't Log in?
  5. Click Maintenance > Router Upgrade.
  6. Click Browse and locate the new firmware which you just downloaded.
  7. Click Upload.
  8. Wait for the router to reboot.
  9. Turn the router power off.
  10. Turn the router power on, and wait for the router to reboot.
  11. Reenter the settings you wrote down in Step 1.

 

Document Type:

Downloads > Driver/Software/Firmware
Published 11/09/2009 08:52 AM   |   Updated 10/29/2011 01:20 PM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.