New Features and Enhancements:

• Modifies the router web interface to support DDNS GDPR v3.
• Includes a new NETGEAR banner logo.
• Removes Step 1 from the ReadySHARE Vault page in the router web interface, which asked to install the genie app.
• The http request will not be redirected when the router detects a WAN/LAN IP conflict in the blank state.
• Updates dnsmasq to V2.78.
• Includes a login password enhancement in the router web interface to support a more secure password.

Bug Fixes:

• Improve the stability of the wireless 5G interface
• Fixes the issue where the speed test in the QoS page always displays a zero number.
• Fixes the issue where if the MTU value is set to 1492 in PPPoE mode, some IPv6 web site can’t be accessed.
• Fixes some minor bugs.

Firmware Upgrade Instructions:

Note: To avoid wireless disconnect issues during the firmware download process, NETGEAR recommends that the firmware upgrade be performed on a computer with a wired connection.

1. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is R7800-V1.0.2.62.img

   Download Link:http://www.downloads.netgear.com/files/GDC/R7800/R7800-V1.0.2.62.zip

2. Using a web browser, The URL is http://www.routerlogin.net.
3. Click ADVANCED>Administration>Firmware Upgrade Page.
4. Click Browse and locate the upgrade file R7800-V1.0.2.62.img.
5. Click Upload.
6. Wait for the upgrade progress bar to complete and final prompt to appear.

If problems occur after upgrading, try clearing the configuration by pressing the Reset Push Button on the Rear panel until the Power LED blinks (about 5 seconds). Then reenter your configuration information manually.

Important Note:

• The upgrade process is complete when the on screen progress bar completes.
• If the upgrade progress bar on web GUI doesn't display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade. After firmware upgrade is done and boots up the system, it changes to steady amber color, then after the boot up is finished it changes to steady white color.
• Please DO NOT power off or reboot the device during the firmware upgrade, otherwise, it may result in corrupt firmware and cause the device not to work.