Bug Fixes and Enhancements:

• Adds wireless CE power table
• Adds Wireless MU-MIMO enable/Disable option on UI Page.
• Fixes iTunes utility will show "rebuffering stream" on PC 1 when iTunes on PC2 play music at the same time.
• Fixes some translation error on UI page.
• Fixes the issue when router is to set bridge mode via WEP. The  Link rate always shows 55 Mbps when auxiliary router is set wireless link rate as 54Mbps.
• Fixes issue when power failure or unplug the power from the router. SIP ALG settings are lost.

Firmware Upgrade Instructions:

Note: To avoid wireless disconnect issues during the firmware download process, NETGEAR recommends that the firmware upgrade be performed on a computer with a wired connection.

1. Write down all the settings that were changed from the default values as you may need to re-enter them manually.
2. Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is R7800-V1.0.0.30.img
   
   Download Link: http://www.downloads.netgear.com/files/GDC/R7800/R7800-V1.0.0.30.zip
   
   
3. To log in to the router type http://www.routerlogin.net into your web browser address bar (such as Internet Explorer or Google Chrome).
4. Click ADVANCED tab > Administration  > Firmware Upgrade.
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade during this step.