New Features and Enhancements:

• Guest Network support.
• Ethernet BH support for MR60 x 1 + MS60 x 1.
• Improved the attached device GUI design.
• Fixed incorrect satellite LED display issue.
• Fixed satellite displayed 0.0.0.0 IP address in the web GUI.
• Fixed incorrect default PPPoE mode setting.
• Fixed the satellite number displayed 0 on NH APP dashboard after FW upgrade.
• Fixed the Enable AX option can’t be disabled issue.
• Fixed the new added client takes longer time to be displayed on the attached device page issue.

Known Issues & Bugs:

• Some new devices are displayed as unknown no matter in web GUI or NH APP.

Download Link: 

MR60 (Mesh Router): http://www.downloads.netgear.com/files/GDC/MK62/MR60-V1.0.1.62_2.0.18.zip

MS60 (Mesh Satellite): http://www.downloads.netgear.com/files/GDC/MK62/MS60-V1.0.1.62_2.0.18.zip

Installation Instructions:

1. Download the firmware to a convenient place such as your desktop.
2. Log in the router using http://routerlogin.net.
3. Click ADVANCED tab.
4. Click Administration.
5. Click Router Update.
6. Click Manual Update tab.
7. Find “Locat and select the upgrade file on your disk” and click “Browse” and locate the file you just downloaded.
8. Click Upload. While the firmware is loading, do not interrupt the upgrade process.
9. The router reboots when the upgrade is complete.
10. In step 7, you can also select satellite and follow the similar steps to upgrade satellite firmware.
11. After the router boots up and the LED becomes steady blue.

To check that the upgrade was successful, log in to the router again at http://routerlogin.net and check the firmware version.