Note:

• Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with "wired" or Ethernet connection only.

New Features & Enhancements

• Patch for intel 6300 client.
• Support WiFi Scheduling.
• Default Language Setting.
• Special dial Function.
• RU Function.

Bug Fixes

• Wire and wireless clients cannot get ip address from Router after 28 hours in HOME_IOT test.
• GUI can't be reached when WAN is disconnected.
• Couldn't function after PPPoE connected for 1-2 mins.
• Check firmware version failed on genie in win 7 system or mac system.
• Can't modify wireless Settings  success on genie  in Android or ipod.
• Can't logged on by genie  at very high frequency in andriod.
• Untranslated string in upgrade detect page.
• 部分宽带线路中(汕头用户频率高些),需要修改MTU值才能打开网页,否则只能上QQ.
• Bad performance in HOME_IOT test.
• The wireless mode default value isn't correct.

known Issues or Limitations

• LED-- LED of the Internet Port (WAN Port) can't change from Green LED to Amber LED when the internet disconnect..

To Install

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with "wired" or Ethernet connection only.

1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button below to a convenient place such as your desktop.
3. Log in to the router using a Web broswer. The URL is http://192.168.1.1 ( if you did not change the router's IP address ).
4. Click Maintenance > Router Upgrade
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step.
   Important Note: The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.