JWNR2000v2 & WNR1500 Firmware Version 1.0.0.9 Note:

• Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

New Features

• Added pre-set SSID and Passphrase feature.
• Added WPS 2.0 feature.
• DynDNS: only supports www.DynDNS.org.
• Take off "Trust IP Address" in QoS.
• Take off Traffic Meter, and Guest Network feature.

Bug Fixes

• Fixed igmp proxy bugs: igmpv3 didn't ignore upstream member report.
• Modified to send broadcast ACK if received DHCP Request had BROADCAST flag. To fixed Netger WNCE2001 and WNCE3001 DHCP failure issue.
• Refine PPP behavior for RU BT issue: do LCP echo reply in kernel space to avoid echo reply time out problem in heavy traffic.
• Enable wpa security in wds mode (only for PR)
• Refine QoS bandwidth detection algorithm to make it mush more accurate.
• To avoid some abnormal PPPoE sever in China, we limit sending PADT to only 2 times.
• Add RU ISP collect-info feature.
• Changed to use new algorithm for uplink bandwidth detection.
  

To Install

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

1. Write down all the settings which you changed from the default values, since you may need to reenter them manually.
2. Download using the button below to a convenient place such as your desktop.
3. Log in to the router using a Web broswer. The URL is http://192.168.1.1 ( if you did not change the router’s IP address ).
4. Click Maintenance > Router Upgrade
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step.
   Important Note: The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
   

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.