JR6100/ R6100 Firmware Version 1.0.1.12

This firmware applies to the following products and regions.

• JR6100 (China)
• R6100 (Russia)

Bug fixes:

• When DDNS service no-ip is disabled, Router WAN will continue to send packets to dynupdate.no-ip.com
• When user had updated the GUI language to V1.0.0.161, the GUI language Version will still displayed V1.0.0.158 on router status page.
• [VPN Passthrough] It should not dial on the VPN server if diable the VPN passthrough function.
• [SQA-2012][AP Mode] The AP mode with auto IP fail.
• [SQA-2010] The link rate of wireless client cannot reach to 867Mbps when we configure the "Region" and "Mode" as "Russia" and "Up to 867Mbps".
• [AP Mode] The udhcpc process will be killed when plug-off and plug-in WAN cable.
• [SQA-1014] The IGMP snooping function on the Ethernet LAN side is failed.
• [SQA-2025] When we add the BT task through "BitTorrent Link" or HTTP task or FTP task and the file size of task is big than storage's capacity, the "check file size, insufficient space?" function for BT does not work.
• [ST/SQA-2023][hidden_info.htm] NETGEAR Download Version field always displays Unknown.
• [SQA-1024] The QoS Uplink bandwith maximum did not configured to 10 Mbps successfully when board data to PR/RU or language to Chinese/Russian.
• [SQA-1027] The Traffic Meter "Internet Traffic Statistics" table did not count the WAN traffic if WAN connection mode is 3G/4G Mobile Broadband
• [SQA 2028]The Router will crash when user enable Guest Network function.
• Delete ping6_traceroute6_hidden_info.htm for fixing the a vulnerability issue.
• [SQA 1034]the Router cannot automatically check Internet uplink bandwidth.
• [Setup wizard] RU_manu_local_resources.htm page has wrong image.
• “Intranet port” has no Russian translation on advance page.
• [SQA-1036]The Router should disable router debugging mode funciton at PR version.
• [SQA-2038]It is fail to use NETGEAR Genie utility to login Router . When we configure the Router login passphrase with many symbols.
• [SQA-2040]Router should show as “R6100”, not “JR6100”.
• [SQA-2041]The browser will show "Internet Explorer cannot display the webpage".

To Install

Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

1. Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
2. Download and extract the new firmware to a convenient place such as your desktop.
3. Log in to the router using a Web browser. The URL is http://www.routerlogin.net.
4. Click ADVANCED tab > Administration > Firmware Upgrade. 
5. Click Browse and find the file you just downloaded.
6. Click Upload. Do not interrupt the upgrade while the router does this step.
   

Important Note:

1.  The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.

2.  If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade.  After firmware upgrade is done and boots up the system, it changes to steady amber color.
Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it  may result to a corrupt firmware and cause the device not to work.
 

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.