Bug Fixes:

• Multiple language truncation.
• 20/40 co-existence,When enalbed guest network, 20/40 co-existence can't work.
• When user enables the My mail server requires authentication and the password contains ASCII characters. The router doesnot send out the log mail.
• Router can detect PPTP mode via CD less or setup wizard.
• When user plug-off and plug-on WAN port Ethernet cable, the WAN port did not send out DHCP REQUEST packet.
• Hairpinning/Port Forwarding, When the externel port and internal port are not the same, the hairpinning function can't work.
• AP mode if enable router as base for WDS function, LAN client can't login router.
• Firmware upgrade alert message translation problem.
• Wireless enabled after restart/power on.
• Transmit power control can't be changed via GUI.
• Correct the LAN 10M LED GPIO definition.
• ip-mac bind page has the needless words.
• no-ip ddns status can't show correct.
• The super wifi doesn't work when the wireless region is Asia.
• Per QCA's suggestion to set br0.arp-ignore to 1 for the endurance test kernel panic issue.

Known Issues:

• The IPv6 pass-through mode doesn't work. The router doesn't transfer IPv6 packets between LAN and WAN.
• When play video by igmp, the multicast packets will be forwarded to all of the client,even it's not in the group.
• WDS compatibility, The router can 't create WDS session with Foxcomm router(R6300 and wndr3400v3).
• After enable Wireless AP , PC1(wired client) can get ip and access GUI with ip address, but can't login router with www.routerlogin.net.

To Upgrade

To reach the Upgrade menu, click Router Upgrade from the Maintenance section. To upload new firmware:

1. Download the firmware and save it to a convenient place such as your desktop. Unzip if needed.
2. Using a browser, login to the router as admin.
3. Under Maintenance click Router Upgrade.
4. Click Browse and locate the upgrade (.img) firmware image file you just downloaded
5. Click Upload. Wait for the upgrade progress bar to complete and final prompt to appear.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.