New feature and modifications:

ž   In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese (日文). 

ž   Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher).

ž   Implemented new access control.

 

 

WARNING:

After JGS524PE and JGS524Ev2 are upgraded to FW version V2.6.0.21 or higher, it cannot work with Plus Utility version prior to V2.7.2.  Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU

 

 

 

Upgrade Procedure

  1. Download the new firmware 2.6.0.21 from NETGEAR product support Website and store it in local PC, and remember its location in the PC’s file system. Unzip it to get the switch firmware image “JGS524PE_JGS524Ev2_V2.6.0.21.bin”.

Download link: http://www.downloads.netgear.com/files/GDC/JGS524EV2/JGS524PE_JGS524Ev2_V2.6.0.21.zip

 

  1. There are two methods to upgrade the new firmware from PC to the switch.

1)    HTTP

2)    ProSAFE Plus Utility

Below are the steps to upgrade the firmware via HTTP, which is the most convenient method. For the other method, please check the IG and SW User Manual for details.

 

  1. To use HTTP method, go to GUI page “Maintenance > Firmware Upgrade"

 

  1. Click the Browse button and locate and select the new firmware image file “JGS524PE_JGS524Ev2_V2.6.0.21.bin”.

 

  1. Click the Apply button.

 

  1. When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.

 

WARNING:

Do not interrupt the network connection or power to the switch, or refresh or close the browser window during this process. Do not disconnect any Ethernet cables or power off the switch until the process is complete.