New feature and modifications:

• In addition to English, WEB GUI can now be displayed in German (Deutsch) or Japanese . 
• Implemented new and more secured encryption algorithm to work with newer versions of Plus Utility (V2.7.2 or higher).
• Implemented new access control

WARNING:

After GSS108E is upgraded to FW version V1.6.0.3 or higher, it cannot work with Plus Utility version prior to V2.7.2.  Please download the latest Plus Utility from http://www.netgear.com/support/product/PCU

Download Link: http://www.downloads.netgear.com/files/GDC/GSS108E/GSS108E_V1.6.0.3.zip

Upgrade Procedure of ProSAFE Plus Utility:

WARNING:

Upgrade Procedure using the ProSAFE Plus Utility (Recommend)

1. Download the firmware V1.6.0.3 from the NETGEAR product support website and save it on your local PC. Unzip it to the file to extract the switch firmware image GSS108E_V1.6.0.3.bin.
2. Download the ProSAFE Plus Utility v2.4.3 (or later version) from http://www.netgear.com/support/product/PCU
3. Decompress the ProSAFE_Plus_Utility_v2.4.3.zip (or later version).
4. Install the ProSAFE Plus Utility by double-clicking the ProSAFE Plus Utility 2.4.3.exe (or later version).
5. Connect your computer to the same network as your GSS108E switch.
6. Double-click the ProSAFE Plus Utility icon. The configuration home page displays a list of Web Managed (Plus) Switches on the network.

   Note: If you do not see your switch in the network list, click the REFRESH button or close and launch the ProSAFE Plus Utility again.  You may also need to configure your computer’s security software to allow broadcast packets to pass through (to/from) your PC’s UDP ports 63321-63324. To allow this traffic, you can create a rule in your computer’s security software, or temporarily disable the firewall, antivirus programs, or all on the computer. If you temporarily disable any security services, be sure to re-enable those services when the firmware upgrade is completed.

7. Select the GSS108E switch that you want to upgrade the firmware on.
8. When prompted, enter the password for the GSS108E switch in the password field.The default password is password.
9. Select System > Maintenance > Firmware Upgrade.The Firmware Upgrade page displays.
10. Click the BROWSE button to locate and select the firmware file GSS108E_V1.6.0.3.bin on your PC.
11. Click the Apply button.
    Warning: Do not interrupt the network connection while in progress. Do not disconnect the Ethernet cable or power off the unit until the process is complete. The update may take several minutes even though you may not see any activity on the screen.
12. When the upgrade is complete, your switch restarts. The upgrade process typically takes about two minutes.
13. Once the new firmware is successfully loaded (onto the switch), your GSS108E will automatically reboot itself. Wait at least 1 minute for the reboot to complete.