GS748Tv4 Firmware Version 5.0.2.18

Note: We recommend you to update your wireless drivers to the latest version available from wireless chipset vendor.

Known Issues:

  1. Sometimes for some type of SFP, fiber connects two switches, shutdown one side, other side still links up. 
  2. When set Minimum Bandwidth as 100 for queue 6, the queue6 stream doesn’t be sent at 100% of port rate.
  3. Cable test works incorrectly on some ports. 
  4. After LAG member is deleted from LAG and is added to LAG again, port security on LAG doesn't work.

Limitations:

  1. Not able to change password with length less than 7 through SCC.

Installation Instructions

  1. Download the new firmware to a convenient place on your local system (e.g., C:\downloads\).
  2. Start Smartwizard Discovery Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
  3. In Smartwizard Discovery window, click Discover to find your Smart Switch. The switch will be listed in the device list table once found. (Note: Smartwizard Discovery uses broadcast packets to find Smart Switches, which means it can only find Smart Switches in the same routing domain.)
  4. Highlight the Smart Switch to upgrade and click Firmware Upgrade.
  5. Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.

 

Document Type

Downloads > Driver/Software/Firmware
Published 03/16/2011 07:12 AM   |   Updated 09/14/2011 01:54 AM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.