GS748Tv3 Firmware Version 3.1.4

New Features:

1. Add a new GUI page to display dynamic MAC address table.

Modifications / Fixes:

1. Fix the issue that smartwizard does not accept password length more than 16. 

Known Issues:

1. Egress packets from a mirrored port will always contain VLAN ID.
   Workaround: Please ignore the VLAN ID.
2. Non-trusted MAC addresses of ARP packets will be learned and displayed on the MAC Address table.
   Workaround: There is no deviation to the Trusted MAC address behavior. Please ignore non trusted MAC addresses on the learning table.

Installation Instructions

1. Download the new firmware to a convenient place on your local system (e.g., C:\downloads\).
2. Start Smartwizard Discovery Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
3. In Smartwizard Discovery window, click Discover to find your Smart Switch. The switch will be listed in the device list table once found. (Note: Smartwizard Discovery uses broadcast packets to find Smart Switches, which means it can only find Smart Switches in the same routing domain.)
4. Highlight the Smart Switch to upgrade and click Firmware Upgrade.
5. Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.

Document Type:

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.