GS724TR/GS748TR Firmware Version 3.0.4

Modifications / Fixes:

  1. Update link to the new online User Manual (Help > Online Help > User Guide page) 

Limitations / Known Issues:

  1. Refreshing the page (Ctrl+F5) will always bring you back to the login page.

Application Notes:

  1. Unlike most of other NETGEAR Switches, configuration change does not automatically get saved. Please go to Maintenance > Save Config > Save Configuration page to save the configuration if you want the settings to be preserved after reboot.

Upgrade Instructions:

  1. Download the new firmware to a convenient place on your local system.
  2. You would need to transfer the V3.0.4 FW to the switch via one of the following methods:
    1. Smartwizard Discovery tool
    2. TFTP in Maintenance > Download > TFTP File Download page
    3. HTTP in Maintenance > Download > HTTP File Download page
  3. Go to Maintenance > File Management > Dual Image Status page; and note the image number that shows version V3.0.4.
  4. Go to Maintenance > File Management > Dual Image configuration page and choose the active image (image1 or image2) corresponding to V3.0.4 to be updated.
  5. Check the ‘Active Image’ and ‘Update Bootcode’ option. (If you upgraded using Smartwizard Discovery Tool, Active Image will be set to the new firmware automatically. You only need to check the Update Bootcode option).
  6. Click Apply.
  7. You need to reboot the switch.
  8. The boot code will be updated.

 

Document Type:

Downloads > Driver/Software/Firmware
Published 02/09/2009 09:05 PM   |   Updated 08/14/2011 11:33 PM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.