GS724TPv2 supports the latest Smart Control Center, please use SCC version 1.1.3.4 for switch discovery, basic configuration and FW upgrades.

New Features and Enhancements:

Added IPv6 ACL (Security > ACL > Advanced > IPv6 ACL/Rules)
Added IPv6 QoS (QoS > DiffServ > Advanced > IPv6 Class Configuration)
Added IPv6 DHCP client (DHCPv6) (System > Management > IPv6 Network Configuration)
Added Client Summary page to Security > Port Authentication > Advanced
SNTP supports IPv6 (Add option "IPv6" to Server Type in System > Management > SNTP Server Configuration page)
Replace TLS1.0 with TLS1.2 (Security > Access > HTTPS > HTTPS Configuration)
Added proprietary Layer 2 Loop Protection (Switching > L2 Loop Protection)
Added an option "Auto" to Fast Link in Switching > STP > Advanced > CST Port Configuration page
Added feature "BPDU Forwarding" to Switching > STP > Advanced > CST Port Configuration page
Added an option "Forbidden" to Interface Status on Multicast Group Membership and Multicast Forward All pages (Switching > Multicast > Static Multicast Address > Multicast Group Membership & Multicast Forward All)
Added an option to "Block Unknown Multicast Address" (Switching > Multicast > IGMP Snooping > IGMP Snooping Configuration)
Added an option of “MAC Auth Bypass" to Port Control under Security > Port Authentication > Advanced > Port Authentication page.
So, it has the following 5 selections for Port Control:
1) Auto
2) Authorized
3) Unauthorized
4) MAC Based
5) MAC Auth Bypass - It works as MAB

Known issues:

Accessing some web GUI pages using Chrome and Internet Explorer (IE) will be slow via HTTPS.
[Workaround]: Use Firefox browser or use HTTP to login.
SNTP broadcast mode is not supported.

[Workaround]: Use unicast mode.
Unable to select primary or secondary image to be the next active image after reboot using Smart Control Center (SCC).

[Workaround]: Use web GUI to select the next active image.

Notes and limitations: