GS724AT, GS748AT Switch Firmware Version 4.0.1.1

Published Sep 28, 2008

Initial Release for GS748AT

New Features:

Bug Fixes:

  1. Fix the problem that can not accept last byte of IP is 0 in IP ACL function.
  2. Fix the problem that getting an ambiguous popup message when trying to set Guest VLAN to Enable.
  3. Correct irrelevant information in RSTP help file.

Limitations and Known Issues:

  1. Only members of default VLAN (VLAN ID of 1) can manage the switch. 
  2. Changing the default PVID would automatically remove the port from VLAN 1.
  3. When configuring IP ACL rule, system does not reject source address to be multicast address and accepts 0.0.0.0 masking.
  4. Cannot delete more than 80 rules at a time.

Upgrading

Note: If Window system does have proper XML service pack installed, the browser might not be able to display GUI configuration page.  In all of the cases we have seen, error message is displayed after entering the login password. To resolve this issue , please download and install MSXML 4.0 Service Pack 2 from: http://www.microsoft.com/downloads/details.aspx?familyid=3144b72b-b4f2-46da-b4b6-c5d7485f2b42&displaylang=en

Download the link below to a PC , and unzip it to a convenient folder. This is a large file!

 

To use Smartwizard Discovery Utility to upgrade:

  1. Start Smartwizard Discovery Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
  2. In Smartwizard Discovery window, click Discover to find your Smart Switch. The switch will be listed in the device list table once found.
  3. Highlight the Smart Switch to upgrade and click Firmware Upgrade.
  4. Browse to the location where the firmware image is stored. Enter the administrator password and click Apply. Click Start Upgrade to start the upgrade process. Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.

 

Document Type:

Downloads > Driver/Software/Firmware
Published 02/19/2009 01:47 PM   |   Updated 09/09/2011 06:37 PM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.