New Features and Enhancements:

• Default “password” must be changed when you log into the switch for the first time.
• To configure SNMPv3, Authentication Protocol must be configured as MD5 or SHA. The ‘none’ option for Authentication Protocol is no longer allowed. 
• Change the default setting for Smart Control Center (SCC) management from enabled to disabled.  Note: SCC Utility can still discover the switch.

Known Issues:

• The stored password format of v7.0.0.9 and v7.0.0.10 is incompatible with v7.0.0.20 if the length is greater than 15 characters. 

Workaround: Please change password to default “password” before upgrading the firmware from v7.0.0.9 or v7.0.0.10 to v7.0.0.20 or newer version.

Firmware Update Instructions:

Download Link: http://www.downloads.netgear.com/files/GDC/GS418TPP/GS418TPP_GS510TLP_GS510TPP_V7.0.0.20.zip

To update your product’s firmware, follow the instructions in your product’s user manual. To find your user manual, visit https://www.netgear.com/support/, enter your model number in the search box, and click the Documentation button on the product page.

The released zip contains the switch firmware (gs418_510txp_v7.0.0.20.stk) and MIB files. Unzip the file to extract the switch image for firmware updating.

The USB storage device that you attach to the USB port of the GS418TPP must comply with the following requirements:

• The USB device must support USB 2.0.
• The USB device must support the FAT32 or VFAT file system. The NTFS file system is not supported.