GS110TP and GS108Tv2 Firmware Version V5.0.5.4

New Features:

• Added a new MAC trap option under System > SNMP > SNMP V1/V2 > Trap Flags. When selected, trap will be sent every time when a MAC address is learnt or removed from a port if port security is enabled.
• MAC table can be displayed by SNMP object (dot1qTpFdbEntry)..

Bug Fixes:

• Fixed the problem that the switch does not reject wrong certificate files.
• Fixed the problem that the switch will reboot after downloading certificate files, generated from Netgear managed switch, and enabling HTTPS.
• Fixed the problem that LAG can't be added to MAC Filter destination port members under Security > Traffic Control > MAC Filter > MAC Filter Configuration.
• Fixed the slow network recovery issue when the network topology is changed using rapid spanning tree protocol (RSTP).
• Fixed the problem that the value of LAG interface counter in MIB object (ifHCInoctets) is cut off when it's over 4,294,967,296 (2^32).
• Fixed the problem that DiffServ policy entry (QoS > DiffServ > Advanced > Policy Configuration) can't be deleted if its name contains character "-".
• Fixed the problem that sometimes PoE LED is lit even when no power is delivering to the connecting Powered Device (PD). Also, after removing the PD, the port's PoE LED remains ON.

Known issues:

• While the link is up, port cannot be removed from a VLAN if it is also member of a LAG.
  Workaround: Remove the link or remove the port from the LAG first. 
• After setting the maximum number of allowed static locked MAC address to zero (under Security > Traffic Control > Port Security > Interface Configuration), no static MAC address can be added even when port security is disabled. 
  Workaround: Change back the "Max Allowed Statically Locked MAC" from 0 to 20.
• Configuration restoration does not work using NMS200.
  Workaround: To restore the configuration file, please use Smart Control Center (SCC) utility, TFTP, or HTTP. The issue with NSM200 will be fixed in the next release.
  

Upgrade Instructions:

1. Download using the button below, saving to a convenient place such as your desktop.
   
2. Please follow the instructions provided in Upgrading GS108Tv2 and GS110TP from 5.0.1.x to 5.0.2.x to upgrade the firmware.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.