GS108Tv1 Firmware Version 3.0.4.4

Modifications / Fixes:

  1. Fixed: Error log is generated when adding entry to the Static MAC Address table in Switching > Address Table > Static Address
  2. Fixed: Local time is not configurable.
  3. Fixed: The “APPLY” button does not get enabled when using the backspace key to edit configurable fields like System Name and LACP System Priority.
  4. Fixed: Changing the STP bridge priority does not have any effect. The switch continues to use the default priority – 32768. 
     

Known Issues:

  1. When strict priority weighting is used for QoS, the egress rate is not evenly distributed among all ingress packets with the same highest priority if low priority packets are also received.
  2. Deleting a trusted MAC entry would also delete the entry in the static MAC table if both addresses are the same.
  3. 802.1X Port Authorization only supports MD5
  4. The mirrored packets from a mirroring port are always tagged with VLAN ID. 
    Workaround: Ignore the VLAN tag
  5. Packet loss may happen when sending jumbo frames from 1 port to multiple ports at wire-speed. 
    Workaround: Enable flow control

Installation Instructions

  1. Download the new firmware using the link below.
  2. Start Smartwizard Discovery Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
  3. In Smartwizard Discovery window, click Discover to find your Smart Switch. The switch will be listed in the device list table once found. (Note: Smartwizard Discovery uses broadcast packets to find Smart Switches, which means it can only find Smart Switches in the same routing domain.)
  4. Highlight the Smart Switch to upgrade and click Firmware Upgrade.
  5. Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.

Download: Right-click and Save 
Size: 1.14 M

 

Document Type:

Downloads > Driver/Software/Firmware
Published 05/25/2009 10:35 AM   |   Updated 08/14/2011 10:56 PM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.