GS108PE Firmware Version 1.00.09

Known Issues:

None 

Limitations:

None

Bug Fixes:

Fix the issue where some multicast packets are flooded to all VLANs. 

Installation Instructions

1. Download the new firmware to a convenient place on your local system and extract the ZIP file (e.g., C:\downloads\).
2. Start ProSafe Plus Configuration Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
3. The ProSafe Plus Utility will scan and detect ProSafe Plus switches on your network. Select the switch to upgrade by clicking on the radio button next to the switch. Enter the adminstrator password of the switch when prompted. 
4. Select Maintenance under the System tab. Click on Firmware Upgrade and Browse to the location when the firmware image is saved.
5. Click Apply to start firmware upgrade.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.