FSM726v2 Fimware Version 1.2.3_1003

This firmware can be used on both FSM726 V2H1 & FSM726 V2H2.

Bug Fixes

  1. Fix the problem that Port mirroring can not be enabled from web interface.
  2. Fix the problem of not able to change to STP from RSTP after resetting the switch back to factory defaults.
  3. Fix the problem that 802.1x does not work with Microsoft RADIUS Server.

Selecting How to Upgrade

A version of switch firmware is stored in non-volatile memory, while another version is stored in regular memory.

The "Net" option, which is used in these Release Note instructions, lets you try the new firmware in regular memory without overwriting the old one in non-volatile memory. This way it's easy to recover if you have a problem with the new firmware.

The "Net & Save" option overwrites both versions with the new firmware.

The "Last Saved" option erases the new firmware, and replaces it with the old firmware the next time the switch reboots.

Upgrading

The upgrade requires a TFTP server. Go to this Web site to download, if you don't have it: 
http://support.solarwinds.net/updates/New-customerFree.cfm. Follow the instructions to install it on your server.

Download and save the firmware file on a computer that has a TFTP server. The file should be in the TFTP home/root directory.

Firmware

Upgrading the firmware

Use either method to install the firmware:

Upgrading Using the Web Interface

  1. Select Advanced > Advanced Tools > Software Upgrade > Net for Next Boot From.
  2. Enter IP address of the computer where you saved the firmware in TFTP Server IP Address.
  3. Enter the firmware's filename in TFTP Path/Filename and click Apply.
  4. Click Tools > Save Configuration > Save.
  5. Select Tools > Device Reset > Reset to reboot.
  6. After the switch reboots, test it. If you decide to keep the new firmware:
    1. Go to Advanced > Advanced Tools > Software Upgrade.
    2. Select Net & Save in Next Boot from.
    3. Click Apply.
    4. Click Save Configuration > Save.
    5. Click Tools > Device Reset > Reset.
  7. If, instead, you decide *not* to keep the new firmware, then reboot the switch.

Upgrading Using the Console Interface

  1. Select Advanced > Advanced Tools > Software Upgrade > Net for Next Boot From.
  2. Enter IP address of the computer where you saved the firmware in TFTP Server IP Address.
  3. Enter the firmware's filename in TFTP Path/Filename.
  4. Press CTRL-W.
  5. Select Main Menu > Tools > Reset Switch to reboot.
  6. After it reboots, test it. If you decide to keep the new firmware:
    1. Go to Advanced > Advanced Tools > Software Upgrade.
    2. Select Net & Save in Next Boot from.
    3. Press CTRL-W.
    4. Select Main Menu > Tools > Device Reset.
  7. If, instead, you decide *not* to keep the new firmware, then reboot the switch.

Published December 14, 2007

 

Published 02/01/2009 10:16 PM   |   Updated 02/01/2009 10:16 PM

 

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.