FS750T2 Smart Switch Firmware Version 1.1.1
Published Jan. 26, 2006
Fixes
1. Resolves flow control continuous pause frame issue.
2. Switch can now be managed from a different subnet.
To Upgrade
1. The Smartwizard Discovery utility must be installed on the computer where you will run the firmware upgrade. If it is not on the computer, install it now from the Smart switch resource CD.
2. Download the new firmware to a convenient place on your local computer (e.g., C:\downloads\).
3. Start Smartwizard Discovery utility. The FS750T2 is listed on the Device List window. (Make sure the computer is on the same subnet as the FS750T2.)
4. Highlight FS750T2 and click Firmware Upgrade.
5. Click Browse and select the new firmware saved in Step 2.
6. Enter the switch's password in the Upgrade Password box.
7. Click Apply.
8. Click Start Upgrade.
Document Type:
This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.