FS728TPv2 Firmware Version 5.0.2.39.

Bug Fixes:

• Fixed the issue that some configuration settings do not take effect after downloading the configuration file until the device is rebooted manually.
• Fixed the problem that LAG interface cannot be selected as Source or Destination Port Members in Security > Traffic Control > MAC Filter > MAC Filer Configuration page.
• Fixed the issue that when an FS728TPv2 and 2 layer 3 switches form VRRP network, FS728TPv2 can’t be managed once the active connection is broken and the backup connection becomes active.
• Fixed the issue that if queue ID other than 0 (eg. queue 2) is selected when configuring minimum bandwidth for all ports (QoS > Advanced > Interface Queue Configuration), the minimum bandwidth will be set in queue 0.
• Fixed the issue that SNMPv3 Engine ID is not unique.

Known issues:

1. While the link is up, port cannot be removed from a VLAN if it is also member of a LAG.
   Workaround: Remove the link or remove the port from the LAG first.
2. After setting the maximum number of allowed static locked MAC address to zero (under Security > Traffic Control > Port Security > Interface Configuration), no static MAC address can be added even when port security is disabled.
   Workaround: Change back the "Max Allowed Statically Locked MAC" from 0 to 20.
3. Can’t remove a policy entry completely in the table under QoS > Diffserv > Advanced > Policy Configuration the first time.
   Workaround: Need to select the same entry and click DELETE again